Federal Bid

Last Updated on 01 Jan 2021 at 4 AM
Special Notice
Vicksburg Mississippi

ZX TM Wind Lidar

Solicitation ID W81EWF93458462
Posted Date 01 Apr 2020 at 3 PM
Archive Date 31 Dec 2020 at 5 AM
NAICS Category
Product Service Code
Set Aside No Set-Aside Used
Contracting Office W2r2 Usa Engr R And D Ctr
Agency Department Of Defense
Location Vicksburg Mississippi United states 39180

USACE, Engineer Research and Development Center (ERDC) Contracting Office intends to issue a sole source award to NRG Systems/DBA Renewable NRG Systems, 110 Riggs Road, Hinesburg, VT  05461-4453 to purchase one ZX TM wind lidar (brand name or equal to).  The wind lidar shall contain the following characteristics:

  1. New Wind lidar system which consists of a lidar control unit (LCU) and 3” lidar optical head (LOH) with the following dimensions:
                                                     LOH: 356 x 285 x 750 mm
                                                     LCU: 190 x 490 x 500 mm
  2. The system will be capable of at least 10 horizontal measurement ranges between 10 m and 400 m from the sensor and 13 vertical slices at each range. Dwell times will be user configurable.
  3. The system is capable of measuring at speeds of up to 50Hz.
  4. The system will be capable of measuring wind speed and vertical wind shear at each horizontal measurement range.
  5. A Turbine Integration Kit (TIK) will be provided for instrument mounting.
  6. The system will have a minimum Ingress Protection (IP) weatherproofing rating of IP65 and be rated for outdoor use.
  7. System will be capable of outputting data via Ethernet, WAP, and GSM modem.
  8. All cables needed to operate the system will be included.
  9. The package shall include all system manuals required for installation and operation of the wind lidar.
  10. Web-based training via Skype will be provided after delivery to walk through system setup, data acquisition, and system maintenance. This formal web based training will be no longer than 1 day in duration.
  11. Delivery and training shall occur within 4 months after contract award.

Specific Characteristics that must be adhered to are:

  • Ability to measure wind speeds at user-defined intervals horizontally away from the sensor (as opposed to vertically above the sensor)
  • a short blanking range (10 m or less) for the sensor which allows nearfield wind measurements
  • a large maximum distance range of the sensor (300 m or larger) enabling measurements over a wider geographic extent

This Notice of Intent is for information purposes only. The Government intends to procure from only one source under the authority of FAR 13.106-1(b)(1)(i). This is not a request for competitive quotes or proposals and no solicitation is available.

This acquisition is being conducted under simplified acquisition procedures. There are no set-aside restrictions for this requirement. The intended procurement will be classified under North American Industry Classification System (NAICS) 334519, Other Measuring and Controlling Device Manufacturing, with a Small Business Size Standard of 500 employees. All sources eligible to provide this supply must respond in writing. Responses must be supported with clear and convincing evidence to clearly articulate the ability to provide the supply as outlined above. The contractor must also provide a description of their past experience in fulfilling requirements which are the same or similar to this requirement and references for each.  A request for documentation will not be considered as an affirmative response. If no responses are received within seven calendar (7) days after publication of this notice, to the effect that comparable services are available, and that it is more advantageous to the Government than obtaining this product through a sole source contract, then a sole source acquisition award will be made. A determination by the Government not to compete based on responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.  Oral communications are not acceptable in response to this notice. Interested parties may submit their capabilities statement for consideration by the Government to [email protected].

The solicitation number shall be included in the subject line of the e-mail submission. Responses must be received no later than 7 calendar days from the posted date of this notice.

Bid Protests Not Available

Similar Past Bids

Laughlin air force base Texas 15 Jan 2021 at 9 PM
Boulder Colorado 06 Jun 2023 at 2 AM
Boulder Colorado 10 May 2023 at 9 PM
Wright patterson air force base Ohio 14 Oct 2021 at 5 PM
Hampton Virginia 24 Jan 2023 at 3 PM

Similar Opportunities

Redstone arsenal Alabama 07 Jul 2025 at 10 PM
Nebraska 31 Aug 2027 at 4 AM