NSN - MEASUREMENTS - PART NUMBER
8475-01-472-3318 - 12 1/4" Thick - 95122A
8475-01-472-3774 - 12 3/8" Thick - 95123A
8475-01-472-3319 - 12 1/2" Thick - 95124A
8475-01-472-3321 - 12 5/8" Thick - 95125A
8475-01-472-3776 - 13 1/4" Thick - 95132A
8475-01-472-3320 - 13 3/8" Thick - 95133A
8475-01-472-3323 - 13 1/2" Thick - 95134A
8475-01-472-3777 - 13 5/8" Thick - 95135A
8475-01-472-3322 - 14 1/4" Thick - 95142A
8475-01-472-3324 - 14 3/8" Thick - 95143A
8475-01-472-3779 - 14 1/2" Thick - 95144A
8475-01-472-3326 - 14 5/8" Thick - 95145A
8475-01-472-3325 - 15 1/4" Thick - 95152A
8475-01-472-3780 - 15 3/8" Thick - 95153A
8475-01-472-3327 - 15 1/2" Thick - 95154A
8475-01-472-3770 - 15 5/8" Thick - 95155A
8475-01-472-3781 - 16 1/4" Thick - 95162A
8475-01-472-3773 - 16 3/8" Thick - 95163A
8475-01-472-3775 - 16 1/2" Thick - 95164A
8475-01-472-3783 - 16 5/5" Thick - 95195A
8415-01-580-5456 - 15 1/4" Thick - 9A-0015-101
8415-01-580-5460 - 15 3/8" Thick - 9A-0015-102
8415-01-580-5465 - 15 1/2" Thick - 9A-0015-103
8415-01-580-5480 - 15 5/8" Thick - 9A-0015-104
8415-01-580-5484 - 16 1/4" Thick - 9A-0016-101
8415-01-580-5489 - 16 3/8" Thick - 9A-0016-102
8415-01-580-5492 - 16 1/2" Thick - 9A-0016-103
8415-01-580-5494 - 16 5/8" Thick - 9A-0016-104
8415-01-580-5498 - 17 1/4" Thick - 9A-0017-101
8415-01-580-5499 - 17 3/8" Thick - 9A-0017-102
8415-01-580-5500 - 17 1/2" Thick - 9A-0017-103
8415-01-580-5859 - 17 5/8" Thick - 9A-0017-104
8415-01-590-3520 - 18 1/4" Thick - 9A-0018-101
8415-01-591-3013 - 18 3/8" Thick - 9A-0018-102
8415-01-591-3015 - 18 1/2" Thick - 9A-0018-103
8415-01-591-3020 - 18 5/8" Thick - 9A-0018-104

This solicitation will be issued on an unrestricted basis and will result in an indefinite delivery purchase order award. There will be multiple orders of multiple quantities to multiple destinations. The total quantity may range from 1 each to a maximum estimated quantity of 1,554 each, for a total dollar value not to exceed $150,000.00. This acquisition will require inspection and acceptance at origin. FOB terms and locations will be specified on each delivery order. Delivery will be required 45 days after the release of a delivery order against the basic award. All materials used in the fabrication are to be furnished by the successful offeror. It is anticipated this solicitation will be posted to the DLA Internet Bid Board System (DIBBS) on or after 14 June 2016.

All offerors MUST be registered in SAM in order to be eligible for award. All responsible sources may submit offers to the Acquisition Specialist which, if timely received, shall be considered. Although the solicitation will be posted via DIBBS, please make sure quotes are sent to the Acquisition Specialist as quote submitted via DIBBS will not be considered.

Availability of solicitations, FAR 5.102(d) applies, as our office no longer issues solicitations or amendments in paper form.

The Defense appropriations and authorization acts and other statutes (including what is commonly referred to as "The Berry Amendment") impose restrictions on the DoD's acquisition of foreign products and services. Generally, Clothing and Textile items (as defined in DFARS clause 252.225-7012) and "specialty metals" (as defined in DFARS clause 252.225-7014), including the materials and components thereof (other than sensors, electronics, or other items added to, and not normally associated with clothing), must be grown, reprocessed, reused, melted or produced in the United States, its possessions or Puerto Rico, unless one of the DFARS 225.7002-2 exceptions applies.