1. Unimac - UniWash 65 lb Capacity Washer/Extractor Model # UWT065V40VX or APPROVED EQUAL Bidders Who Propose Bidders who propose alternate brands/specifications SHOULD enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non-responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brands/specifications stated in the solicitation. NO COVID RESTRICTIONS SPECIFICATIONS: - Shall have network capable UniLink Touch Controls, liquid supply injection, 400 G force variable-ultra high speed extractor, direct v-belt drive spray rinse, fast fill, stainless steel cabinet - Unit shall include multiple hot and cold inlets for faster fill time - Unit shall be compatible with ozone systems and shall be a rigid mount washer/extractor. - Warranty Requirements: Three Years (Parts), Five Years (frame, basket, shaft, bearings and seals). - Dry weight shall be 65 lb capacity - Shall have multiple programmable cycles - Electric - 3 Phase / 240 volt - 9.7 cu. ft. cylinder volume - Shall be between 64.7" in height up to 65" - Shall be between 34.1"in width up to 35" - Shall be between 51.1" in depth up to 52" - Motor Size 5 HP - Drain diameter 3" - Water inlet connection 4 @ 3/4 (19) - Front loading and hinged from the side. IF VENDORS WANT TO DO A SITE VISIT, vendors may contact: Park Contact: Chris Perry, Park Manager, 606-286-4411 Vendor shall provide on-site installation, set up, and training for Parks' Staff. Vendors responsible for disconnecting and removing old equipment, but parks will dispose of old equipment. No loading dock, unit should be able to roll through the door. Door opening 39" x 80" tall. No pallet jack - park has tractor with forks for unloading. DELIVERY/INSTALLATION/SETUP/TRAINING TO BE INCLUDED IN BID OFFER Deliver to Address: 344 Caveland Drive Olive Hill, KY 41164. 2. UniMac 55 lb Electric Heated Drying Tumbler, Model Number UTO55EVN0R or APPROVED EQUAL Bidders Who Propose Bidders who propose alternate brands/specifications SHOULD enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non-responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brands/specifications stated in the solicitation. NO COVID RESTRICTIONSSPECIFICATIONS: - Network capable UniLinc Controls, Optidry Moisture Sensing, White Cabinet, embossed steel front panels, belt driven, lint filter, stainless steel door, reversing cylinder. - Warranty Requirement: Three Years - Front loading - hinged on the right side of unit. - 75 lb dry weight capacity - Electric Specs - 3 phase / 240 volts - Shall have multiple auto-dry and time-dry cycles - Cylinder Size - may have 37" diameter - Cylinder Volume - may have 22.4 cu. ft. - Height - shall be 77.3" - Air Flow - shall have a minimum of or greater than 800 CFM - Air Outlet Diameter - 8" - Computerized moisture sensing dry. Vendor shall provide on-site installation, set up, and training for Parks' Staff. Vendors responsible for disconnecting and removing old equipment, but parks will dispose of old equipment. IF VENDORS WANT TO DO A SITE VISIT contact: Danny Sallee, Park Manager, 270-646-2151 Ext 2421 2 foot tall (off the ground) dock in front of laundry building. DELIVERY/INSTALLATION/SETUP/TRAINING TO BE INCLUDED IN BID OFFER Deliver to Address: 1149 State Park Road Lucas, KY 42156 3. Unimac - UniWash 45 lb Capacity Washer/Extractor Model # UWTO45V40L or APPROVED EQUAL Bidders Who Propose Bidders who propose alternate brands/specifications SHOULD enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non-responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brands/specifications stated in the solicitation. NO COVID RESTRICTIONS SPECIFICATIONS: - Shall have network capable UniLink Controls, liquid supply injection, normal extract, single motor design, direct v-belt drive, spray rinse, fast fill, stainless steel cabinet. - Unit shall include multiple hot and cold inlets for faster fill time - Cylinder speed RPM (g-force) shall be 400 - Unit shall be compatible with ozone systems and shall be a rigid mount washer/extractor. - Warranty Requirements: Three Years (Parts), Five Years (frame, basket, shaft, bearings and seals). - Dry weight shall be 65 lb capacity - Shall have multiple programmable cycles - Input Voltage shall be 280-240/60/3/1 - 9.7 cu. ft. cylinder volume - Shall be between 64.7" in height up to 65" - Shall be between 34.1"in width up to 35" - Shall be between 51.1" in depth up to 52" - Door Bottom to Floor - shall be between 28.8 up to 29" - Motor Size 5 HP - Drain diameter 3" - Water inlet connection 4 @ 3/4 (19) Vendor shall provide on-site installation, set up, and training for Parks' Staff. Vendors responsible for disconnecting and removing old equipment, but parks will dispose of old equipment. No loading dock at the facility, but does have a pallet jack and dolly for vendor use. IF VENDORS WANT TO DO A SITE VISIT contact: Chris Fugate, Park Manager, 606-398-7510 Ext 2101DELIVERY/INSTALLATION/SETUP/TRAINING TO BE INCLUDED IN BID OFFER Deliver To Address: 4441 KY Hwy 1833 Buckhorn, KY 41721 4. Maytag - Top Load Washer - Model No. MAT20PRAWW or APPROVED EQUAL Bidders Who Propose Bidders who propose alternate brands/specifications SHOULD enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non-responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brands/specifications stated in the solicitation. NO COVID RESTRICTIONS SPECIFICATIONS: - Cubic feet, large tub, 120/60/1. - Warranty Requirements: Three Years (Parts), Five Years (frame, basket, shaft, bearings and seals). - Input Voltage shall be 120/60/1 - Breaker / Fuse - amps - 15 - Cylinder volume - 2.9 cu. ft. - Cylinder diameter - 20.8" - Cylinder depth - 23.8" - Lid opening - 17" - Shall be 42 1.2" in height (cannot be larger) - Shall be 27" in width (cannot be larger) - Shall be 26" in depth (cannot be larger) - Motor Size - HP (KW) - 1/2 - Operating pressure (PSI) - 20-100 - Inlet hose length - 6 ft. - Drain hose length - 4.2 ft. Vendor shall provide on-site installation, set up, and training for Parks' Staff. Vendors responsible for disconnecting and removing old equipment, but parks will dispose of old equipment. IF VENDORS WANT TO DO A SITE VISIT Contact: Brenda Danner, Park Manager, 606-473-7324 No loading dock or equipment at park to help unload. Can use handicap ramp to move to the laundry room. DELIVERY/INSTALLATION/SETUP/TRAINING TO BE INCLUDED IN BID OFFER Deliver to Address: 965 Lodge Road Greenup, KY 41144. 5. UniMac 75 lb Electric heated drying tumbler - Model Number WTO75EVN0RN or APPROVED EQUAL Bidders Who Propose Bidders who propose alternate brands/specifications SHOULD enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non-responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brands/specifications stated in the solicitation. NO COVID RESTRICTIONS SPECIFICATIONS: - Network capacle UniLinc touch controls, optidry moisture sensing, white cabinet, embossed steel front panels, belt driven, lint filter, stainless steel door, reversing cylinder. - Warranty Requirement: Three Years - 75 lb dry weight capacity - Electric - 440-480/60/3 - Shall have multiple auto-dry and time-dry cycles - Cylinder Size - may have 37" diameter - Cylinder Volume - may have 22.4 cu. ft. - Height - shall be between 77.3 and 74" - Width - shall be between 38.5" and 39" - Depth - shall be 53.0" - Air Flow - shall have a minimum of or greater than 800 CFM - Air Outlet Diameter - 8" - Computerized moisture sensing dry. Vendor shall provide on-site installation, set up, and training for Parks' Staff. Vendors responsible for disconnecting and removing old equipment, but parks will dispose of old equipment. Loading dock available, but not of standard height, no unloading equipment at this facility. IF VENDORS WANT TO DO A SITE VISIT Contact: Scot Ratzlaff, Park Manager, 270-362-4271 DELIVERY/INSTALLATION/SETUP/TRAINING TO BE INCLUDED IN BID OFFER Deliver to Address: 166 Upper Village Drive Gilbertsville, KY 42044 6. Unimac - UniWash 65 lb Capacity Washer/Extractor Model # UWT065V40VX or APPROVED EQUAL Bidders Who Propose Bidders who propose alternate brands/specifications SHOULD enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non-responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brands/specifications stated in the solicitation. NO COVID RESTRICTIONS SPECIFICATIONS: - Shall have network capable UniLink Touch Controls, liquid supply injection, 400 G force variable-ultra high speed extractor, direct v-belt drive spray rinse, fast fill, stainless steel cabinet - Unit shall include multiple hot and cold inlets for faster fill time - Unit shall be compatible with ozone systems and shall be a rigid mount washer/extractor. - Warranty Requirements: Three Years (Parts), Five Years (frame, basket, shaft, bearings and seals) - Dry weight shall be 65 lb capacity - Shall have multiple programmable cycles - Electric - 3 phase / 200 single phase 240 volt - 9.7 cu. ft. cylinder volume - Shall be between 64.7" in height up to 65" - Shall be between 34.1"in width up to 35" - Shall be between 51.1" in depth up to 52" - Door Bottom to Floor - shall be between 28.8" up to 29" - Motor Size 5 HP - Drain diameter 3" - Water inlet connection 4 @ 3/4 (19) Park has loading dock. Vendor shall provide on-site installation, set up, and training for Parks' Staff. Vendors responsible for disconnecting and removing old equipment, but parks will dispose of old equipment. IF VENDORS WANT TO DO A SITE VISIT Contact: Stephen Eastin, Park Manager, 270-343-3111 Ext 402 DELIVERY/INSTALLATION/SETUP/TRAINING TO BE INCLUDED IN BID OFFER Deliver to Address: 5465 State Park Road Jamestown, KY 42629 7. Unimac - UniWash 45 lb Capacity Washer/Extractor Model # UWTO45V40L or APPROVED EQUAL Bidders Who Propose Bidders who propose alternate brands/specifications SHOULD enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non-responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brands/specifications stated in the solicitation. NO COVID RESTRICTIONS SPECIFICATIONS: - Shall have network capable UniLink Controls, liquid supply injection, normal extract, single motor design, direct v-belt drive, spray rinse, fast fill, stainless steel cabinet. - Unit shall include multiple hot and cold inlets for faster fill time - Cylinder speed RPM (g-force) shall be 400 - Unit shall be compatible with ozone systems and shall be a rigid mount washer/extractor. - Warranty Requirements: Three Years (Parts), Five Years (frame, basket, shaft, bearings and seals). - Dry weight shall be 65 lb capacity - Shall have multiple programmable cycles - Input Voltage shall be 280-240/60/3/1 - 9.7 cu. ft. cylinder volume - Shall be between 64.7" in height up to 65" - Shall be between 34.1"in width up to 35" - Shall be between 51.1" in depth up to 52" - Door Bottom to Floor - shall be between 28.8 up to 29" - Motor Size 5 HP - Drain diameter 3" - Water inlet connection 4 @ 3/4 (19) Vendor shall provide on-site installation, set up, and training for Parks' Staff. Vendors responsible for disconnecting and removing old equipment, but parks will dispose of old equipment. IF VENDORS WANT TO DO A SITE VISIT Contact: Tim Hibbard, Park Manager, 606-663-2214 No loading dock at the lodge, can use tractor with forks to unload from truck. Park does have pallet jack. DELIVERY/INSTALLATION/SETUP/TRAINING TO BE INCLUDED IN BID OFFER Deliver to Address: 2135 Natural Bridge Road Slade, KY 40376 8. Unimac - UniWash 65 lb Capacity Washer/Extractor Model # UWT065V40VX or APPROVED EQUAL Bidders Who Propose Bidders who propose alternate brands/specifications SHOULD enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non-responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brands/specifications stated in the solicitation. NO COVID RESTRICTIONS SPECIFICATIONS: - Shall have network capable UniLink Touch Controls, liquid supply injection, 400 G force variable-ultra high speed extractor, direct v-belt drive spray rinse, fast fill, stainless steel cabinet - Unit shall include multiple hot and cold inlets for faster fill time - Unit shall be compatible with ozone systems and shall be a rigid mount washer/extractor. - Warranty Requirements: Three Years (Parts), Five Years (frame, basket, shaft, bearings and seals). - Dry weight shall be 65 lb capacity - Shall have multiple programmable cycles - Electric - 3 Phase - 208/240 volt - 9.7 cu. ft. cylinder volume - Shall be between 64.7" in height up to 65" - Shall be between 34.1"in width up to 35" - Shall be between 51.1" in depth up to 52" - Door Bottom to Floor - shall be between 28.8" up to 29" - Motor Size 5 HP - Drain diameter 3" - Water inlet connection 4 @ 3/4 (19) Vendor shall provide on-site installation, set up, and training for Parks' Staff. Vendors responsible for disconnecting and removing old equipment, but parks will dispose of old equipment. No loading dock available, but does have a tractor with forks if needed to unload. IF VENDORS WANT TO DO A SITE VISIT Contact: Melisa Voges, Park Manager, 270-797-3421 Ext 2400 DELIVERY/INSTALLATION/SETUP/TRAINING TO BE INCLUDED IN BID OFFER Deliver to Address: 20781 Pennyrile Lodge Road Dawson Springs, KY 42408 9. Unimac - UniWash 65 lb Capacity Washer/Extractor Model # UWTO65V40L or APPROVED EQUAL Bidders Who Propose Bidders who propose alternate brands/specifications SHOULD enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non-responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brands/specifications stated in the solicitation. NO COVID RESTRICTIONS SPECIFICATIONS: - Shall have network capable UniLink Controls, liquid supply injection, normal extract, single motor design, direct v-belt drive, spray rinse, fast fill, stainless steel cabinet. - Unit shall include multiple hot and cold inlets for faster fill time - Cylinder speed RPM (g-force) shall be 400 - Unit shall be compatible with ozone systems and shall be a rigid mount washer/extractor. - Warranty Requirements: Three Years (Parts), Five Years (frame, basket, shaft, bearings and seals). - Dry weight shall be 65 lb capacity - Electric - 208/240/60/3 - 31" in cylinder diameter up to 31.1" - 22.1" in cylinder depth - 9.7 cu. ft. cylinder volume - Shall be between 64.7" in height up to 65 - Shall be between 34.1" in width up to 34.6" - Shall be between 51.1" in depth - Door Opening size - shall be between 17.8" up to 17.9" - Door Bottom to Floor - shall be between 28.8" up to 29" - Motor Size 5 HP - Drain diameter 3" - Water inlet connection 4 @ 3/4" - Up to 400 G Force - Unit shall be compatible with ozone systems and shall be a rigid mount washer/extractor. - Warranty shall be three (3) years or more on all parts and five (5) years on frame, basket, shaft, bearings and seals. Vendor shall provide on-site installation, set up, and training for Parks' Staff. Vendors responsible for disconnecting and removing old equipment, but parks will dispose of old equipment. No loading dock and no equipment to help unload available. IF VENDORS WANT TO DO A SITE VISIT Contact: Rita Jackson-Edmondson, Park Manager, 606-337-3066 DELIVERY/INSTALLATION/SETUP/TRAINING TO BE INCLUDED IN BID OFFER Deliver to Address: 1050 State Park Road Pineville, KY 40977 10. UniMac 55 lb Electric Heated Drying Tumbler, Model Number UTO55EVN0R or APPROVED EQUAL Bidders Who Propose Bidders who propose alternate brands/specifications SHOULD enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non-responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brands/specifications stated in the solicitation. NO COVID RESTRICTIONS SPECIFICATIONS: - Network capable UniLinc Controls, Optidry Moisture Sensing, White Cabinet, embossed steel front panels, belt driven, lint filter, stainless steel door, reversing cylinder. - Warranty Requirement: Three Years - 75 lb dry weight capacity - Electric Specs - 204/208 volt 3 phase - Shall have multiple auto-dry and time-dry cycles - Cylinder Size - may have 37" diameter - Cylinder Volume - may have 22.4 cu. ft. - Height - shall be 77.3" - Air Flow - shall have a minimum of or greater than 800 CFM - Air Outlet Diameter - 8" - Computerized moisture sensing dry. Vendor shall provide on-site installation, set up, and training for Parks' Staff. Vendors responsible for disconnecting and removing old equipment, but parks will dispose of old equipment. IF VENDORS WANT TO DO A SITE VISIT Contact: Michael Ricks, Park Manager, 270-257-2311 No loading dock - no equipment available to help unload. DELIVERY/INSTALLATION/SETUP/TRAINING TO BE INCLUDED IN BID OFFER Delivery to Address: 450 Lodge Road Falls of Rough, KY 40119 11. UniMac 55 lb Electric Heated Drying Tumbler, Model Number UTO55EVN0R or APPROVED EQUAL Bidders Who Propose Bidders who propose alternate brands/specifications SHOULD enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non-responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brands/specifications stated in the solicitation. NO COVID RESTRICTIONS SPECIFICATIONS: - Network capable UniLinc Controls, Optidry Moisture Sensing, White Cabinet, embossed steel front panels, belt driven, lint filter, stainless steel door, reversing cylinder. - Warranty Requirement: Three Years - 75 lb dry weight capacity - Electric Specs - 3 phase / 240 volt 78 amps. - Shall have multiple auto-dry and time-dry cycles - Cylinder Size - may have 37" diameter - Cylinder Volume - may have 22.4 cu. ft. - Height - shall be 77.3" - Air Flow - shall have a minimum of or greater than 800 CFM - Air Outlet Diameter - 8" - Computerized moisture sensing dry. Vendor shall provide on-site installation, set up, and training for Parks' Staff. Vendors responsible for disconnecting and removing old equipment, but parks will dispose of old equipment. No loading dock available, but does have a tractor with forks if needed to unload. IF VENDORS WANT TO DO A SITE VISIT Contact: Melisa Voges, Park Manager, 270-797-3421 Ext 2400 DELIVERY/INSTALLATION/SETUP/TRAINING TO BE INCLUDED IN BID OFFER Deliver to Address: 20781 Pennyrile Lodge Rd Dawson Springs, KY 42408

Bid Protests Not Available