THIS REQUIREMENT IS BEING DELIVERED TO GERMANY.

HQ USAFE A3

UNIT 3050 BOX 15 BLD 201 RM A116

APO, AE 09094

1. Below are the minimum required items for purchase of our access control system.

a. MX-4 Controller (1ea)

Controls 4 Fully Supervised Doors. 4000 Users, 4 door relays,

4 Alarm Inputs (requires Line Modules),

enclosure, power supply, battery (1.3Ah), tamper switch, lock

and integrated SNIB2. Built in software

configurable Wiegand interface for direct reader connection.

Supports Expansion Boards. Provides

10/100 encrypted Ethernet to Host PC and downstream

controllers (Mx and DIGI*TRAC). Requires

Velocity 3.5 SP1 or later for full functionality. Switching power

supply (110/230). *upgradeable to 8 doors.

b. Scramble*Net Interface Board (1ea)

Networks DIGI*TRAC controller to PC (with Velocity Version

3.6 SP1 or later only) via 10/100/1000 Ethernet (TCP/IP).

Optically isolated RS-485 port for multi-drop between SNIB2s

at baud rates up to 115K Bps. Supports AES (128 and 256 bit

Rijndael) encryption between host PC and Master SNIB3 and

between Master SNIB3 and downstream SNIB2 or SNIB3.

Master SNIB3 supports integral XBox functionality for

globalization. Supports IPv6, DHCP and second network port

for future use, FICAM enabled. UL listed.

c. RS-485 Reader Expansion Board (1ea)

RS-485 Reader Expansion Board (RREB) provides OSDP communication

with up to 16 readers across

8 doors for processing PIV/PIV-I/CIV credentials at time of access in

compliance with FICAM.

Part.-Nr.: HF-RREB

d. Standby Battery 7Amp Hour, 24 Volt

Part.-Nr.: HF-SB7Ah

e. Power Supply (1ea)

Dual Range Harnessed - 2A

Power Supply 2 Amp Fused, 90-130V AC Harness (PVA-115

default). Specify 180-260V AC Harness

(PVA-230) if required. For M16, MSP-8R, and M2 (fits Version

6 enclosure only).

Part.-Nr.: HF-PSH2A-230V

f. uTrust TS ScramblePad – Network (PoE) – Terminal - RS-

485/OSDP FICAM (4ea)

TS ScramblePad - Network (PoE) - Terminal FICAM PIV CAK certificate

processing at the door,

military CAC and other PIV cards without CAK output 75-bit FASC-N,

Software configurable support for

secure high frequency 13.56GHz Identiv TS, DESFire, MIFARE DESFire,

PLAID [ISO/IEC 25185],

Smart Card UID support for ISO15693 UID, ISO14443A UID, Low Frequency

125 kHz support for

HID® Prox, Indala®, Casi Rusco®, AWID, Farpointe®, and others; RS-

485/OSDP; REQUIRES SNIB3

and RREB or Mx-1 and VEL-VCCS for proper operation

Part.-Nr.: HF-8332ABTF000

g. Exterior Heavy Duty Mounting Box (1ea)

Rear conduit entry. Includes heavy duty gasket. Rust-Free

Aluminum. 7"H x 5 1/4"W x 7"D (8"D overhang).

Part.-Nr.: HF-MB5

h. Sloped Surface Mounting Box (3ea)

for Scramble reader

Rear and bottom conduit entry.

5 5/8"H x 4 1/4"W x 2 7/8"D.

Part.-Nr.: HF-MB2SL

i. Mounting Box Entension 1/2 INC (3ea)

Part.-Nr.: HF-MBX

j. Power Supply Transformer (1ea)

The power supply transforms 230 V AC voltage into

12 V DC voltage. It is therefore excellently suited as

Central supply station for access control systems. Eight

separate connections are available on the device. The power

supply works with both 230 V

mains voltage as well as with a 12V/7Ah emergency power

battery

(BT2070). A charging electronics for the battery is in the robust

Metal housing of power supply integrated. The

Output current (nominal current) is 2 A. This switching power

supply

has a low energy consumption and a high

Efficiency. The power supply is for installation in the

Indoor area provided.

395 / 1024

A lid switch serves the

Monitoring of the device and to protect against possible

Sabotage. Pre-punched breakthroughs laterally on the

Housings allow individual openings for a clean

Cable guide. The LED control indicator informs you on an

ongoing basis

on the condition of the power supply. The eight outputs are

individually secured and protected against overload and short

circuit

protected.

Part.-Nr.: TVAC35500

k. Standby Battery (1ea)

Nominal voltage: 12 V

Capacity: 7 AH

Weight: 2,54 kg

Features: BP series: Allround PLUS

Lifetime (cyclical): Up to 500 cycles (loading/unloading

operations at 50% discharge depth)

Lifetime (calendar): LONG LIFE, 10 to 12 years after

EUROBAT (standby operation at 20°C)

Part.-Nr.: BS127N

l. Labor/Installation/Programming of the unit will be required