Federal Bid

Last Updated on 26 Sep 2013 at 8 AM
Solicitation
Location Unknown

USCGC DEPENDABLE (WMEC-626) DOCKSIDE

Solicitation ID HSCG80-13-Q-P45T06
Posted Date 07 Aug 2013 at 4 PM
Archive Date 26 Sep 2013 at 5 AM
NAICS Category
Product Service Code
Set Aside Total Small Business (SBA) Set-Aside (FAR 19.5)
Contracting Office Sflc Procurement Branch 1(00080)
Agency Department Of Homeland Security
Location United states
PRE-SOLICITATION:

The United States Coast Guard, Surface Forces Logistics Center, Norfolk VA, intends to issue a Commercial Request for Quotation (RFQ) for Dockside repairs to the CGC DEPENDABLE (WMEC-626) a 210 Foot "B Class" Medium Endurance Cutter. The NAICS Code is 336611.

The Coast Guard intends to conduct the procurement in accordance with FAR Part 12, Acquisition of Commercial Items, and FAR Subpart 13.5, Test Program for Certain Commercial Items. The simplified acquisition will be issued as a 100% Total Small Business Set-Aside. Request for Quotation (RFQ) will be issued on or about August 14, 2013. The solicitation will be issued electronically via the Federal Business Opportunity web page at http://www.fedbizopps.gov. It is incumbent upon contractors to monitor the FEDBIZOPS web page for the RFQ release and all subsequent amendments. Hard copies of the specification and solicitation will not be issued.
The acquisition is to perform dockside repairs to the CGC DEPENDABLE (WMEC-626). There is no geographical restriction for this vessel. The vessel is home ported in Cape May, NJ.. All work will be performed at the vessel's home port.
Anticipated Period of Performance: The period of performance is anticipated to be for FIFTY SEVEN (57) calendar days with a start date of 25 September 2013 and end date of 20 November 2013. (Subject to change at the discretion of the Government)
Scope of Work: The scope of the acquisition is for the overhauling, cleaning, and repairing of various items aboard the CGC DEPENDABLE (WMEC-626).This work will include, but is not limited to the following WORK ITEMS:


Work Item 001 Deck Steel, Stack Space, Renew, 2012002
Work Item -002 Tanks (Aviation Fuel Service), Clean and Inspect
Work Item -003 Tanks (Aviation Fuel Stowage and Overflow), Clean and Inspect
Work Item -004 Chain Lockers, Clean and Inspect
Work Item -005 Tanks (MP Fuel Stowage and Overflow), Clean and Inspect
Work Item -006 Tanks (MP Fuel Service), Clean and Inspect
Work Item -007 Tanks (Hydraulic Oil Stowage), Clean and Inspect
Work Item -008 Tanks (Potable Water), Clean and Inspect
Work Item -009 Tanks (Lube Oil), Clean and Inspect
Work Item -010 Tanks (Dirty Oil and Waste), Clean and Inspect
Work Item -011 Propulsion Shafting, Strain Gage Alignment Inspections
Work Item -012 Vent Ducts (Engine, Machinery Rooms and Uptake Space), Commercial Cleaning
Work Item -013 Vent Ducts (Galley and Pantry Room All), Commercial Cleaning
Work Item -014 Vent Ducts (Laundry), Commercial Cleaning
Work Item -015 Vent Ducts (All Other), Commercial Cleaning
Work Item -016 Reverse Osmosis Desalination Plant, Overhaul
Work Item -017 Anchor Windlass, Port and Starboard, Inspect and Service
Work Item -018 Warping Capstan, Inspect and Service
Work Item -019 Temporary Services and Crane-Barge Services, Provide
Work Item -020 Scullery Sanitizing Dishwasher, Renew; 2011016
Work Item -021 Main Engine Jacket Water Valves, Renew, 2012021
Work Item -022 Sea Water Cooling System Components, Renew, 2009009, 2012019
Work Item -023 Urinal System Components, Overhaul & Renew, 2013002
Work Item -024 Towing Bitts, Chocks, and Fairleads; Inspect and Test
Work Item -025 Deck Drain Valves, Flight Deck, Renew, 2012015
Work Item -026 Reverse Osmosis Foundation and Bilge Area, Preserve, 2013005
Work Item -027 Fixed Ballast (Lead Ingot), Reinstall
Work Item -028 Compartment Interior, Lead Dust, Clean
Work Item -029 Welin Lambie Davit Foundation, Reinforce, 2012023
Work Item -030 Fantail Overhead, Preserve, 2013004
Work Item -031 Brackets and Handrails, Various, Renew, 2012020
Work Item -032 Travel and Per diem

All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures.

A CD-ROM containing all applicable drawings will be sent via U.S. mail, if requested. Send all requests to [email protected]. The CD-ROM sets are available of all cutters and will be free of charge to contractors upon request. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc).

 

Bid Protests Not Available

Similar Past Bids

Location Unknown 26 Feb 2009 at 8 PM
Center Kentucky 30 Dec 2008 at 4 PM
Location Unknown 11 Jul 2019 at 12 AM
Location Unknown 25 Jun 2013 at 7 PM
Location Unknown 21 Aug 2013 at 12 PM

Similar Opportunities

North charleston South carolina 25 Jul 2025 at 6 PM
Honolulu Hawaii 25 Jul 2025 at 10 PM
Norfolk Virginia 11 Jul 2025 at 5 PM