G
Indefinite Delivery Contract (IDC) Project CM20206029 - Synopsis
Nine (9) National Stock Number with Estimated Annual Demand Quantity (ADQ):
CLIN 0001: NSN 5930-00-804-3694 ADQ: 228
CLIN 0002: NSN 5930-01-032-3659 ADQ: 250
CLIN 0003: NSN 5930-01-051-6070 ADQ: 291
CLIN 0004: NSN 5930-01-052-2457 ADQ: 114
CLIN 0005: NSN 5930-01-123-6516 ADQ: 26
CLIN 0006: NSN 5930-01-189-0493 ADQ: 42
CLIN 0007: NSN 5930-01-296-1138 ADQ: 131
CLIN 0008: NSN 5905-01-363-0668 ADQ: 28
CLIN 0009: NSN 5930-01-558-4317 ADQ: 68
Unit of Issue: EA
Destination Information: Various DLA Stocking Locations
This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1). Dealers will be required to submit traceability documentation back to the approved source. Freight on Board (F.O.B.) will be at Origin and Inspection/Acceptance will be at Destination. The proposed procurement will be an Indefinite Delivery Contract (IDC), and will be for a total of two (2) years, to consist of one (1) base year and one (1) option year. The option year may be exercised at the discretion of the Government.
Based upon market research, the Government is using the policies contained in FAR Sub Part 13.5 – Simplified Procedures for Certain Commercial Items in its solicitation for the described supplies.
This will be solicited as Unrestricted. The solicitation will be available on the DLA Internet Bid Board System (DIBBS) at https://www.dibbs.bsm.dla.mil/rfp/default.aspx on or about its estimated issue date of July 26, 2021. Specifications, plans, or drawings are not available.
RESPONSE DATE: Offers/Responses will be due prior to the closing date and time specified in Block 8 (Offer Due Date/Local Time) on Page 1 of Standard Form (SF) 1449 (Solicitation/Contract/Order for Commercial Items). All responsible sources may submit an offer/proposal, which shall be considered.
While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance, and other evaluation factors, as described in the solicitation.
One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer.
Procurement Item Description (PID), Packaging and Marking Text:
-
*** LTC PID Packaging Consolidated Text ***
-
PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.
CLIN 0001: NSN: 5930-00-804-3694
SWITCH, TOGGLE
REFERENCE NUMBER: RP001
REFERENCE NUMBER: A1202
REFERENCE NUMBER: RA001
REFERENCE NUMBER: RQ002
REFERENCE NUMBER: RQ011
REFERENCE NUMBER: ZD080
REFERENCE NUMBER: CS241
REFERENCE NUMBER: CS199
REFERENCE NUMBER: E0201
REFERENCE NUMBER: ZD074
CRITICAL APPLICATION ITEM
MASON ELECTRIC CO. 81579 P/N 421506
PREP FOR DELIVERY
LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
CLIN 0002: NSN: 5930—01-032-3659
SWITCH, TOGGLE
REFERENCE NUMBER: A1202
REFERENCE NUMBER: RP001
REFERENCE NUMBER: RA001
REFERENCE NUMBER: RQ002
REFERENCE NUMBER: RQ011
REFERENCE NUMBER: CS241
REFERENCE NUMBER: CS199
REFERENCE NUMBER: E0116
REFERENCE NUMBER: ZD074
CRITICAL APPLICATION ITEM
MASON ELECTRIC CO. 81579 P/N 306-4307
PREP FOR DELIVERY
LINE ITEM 00004 TYPE OF COVERAGE: DLA DIRECT, CONUS
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
CLIN 0003: NSN: 5930-01-051-6070
SWITCH, SLIDE
REFERENCE NUMBER: RP001
REFERENCE NUMBER: RA001
REFERENCE NUMBER: RQ002
REFERENCE NUMBER: RQ011
REFERENCE NUMBER: ZD080
REFERENCE NUMBER: E0165
REFERENCE NUMBER: EVC01
REFERENCE NUMBER: ZD025
REFERENCE NUMBER: ZD074
CRITICAL APPLICATION ITEM
MASON ELECTRIC CO. 81579 P/N 315-4303
PREP FOR DELIVERY
LINE ITEM 00007 TYPE OF COVERAGE: DLA DIRECT, CONUS
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
CLIN 0004: NSN: 5930-01-052-2457
SWITCH, SLIDE
REFERENCE NUMBER: RP001
REFERENCE NUMBER: RQ032
REFERENCE NUMBER: RA001
REFERENCE NUMBER: RQ002
REFERENCE NUMBER: RQ011
REFERENCE NUMBER: ZD080
REFERENCE NUMBER: E0165
REFERENCE NUMBER: ZD025
REFERENCE NUMBER: ZD074
MASON ELECTRIC CO. 81579 P/N 385-4305
IAW REFERENCE DRAWING NR 81755 C8736
REVISION NR G DTD 03/18/1982
PART PIECE NUMBER: C8736-2
PREP FOR DELIVERY
LINE ITEM 00008 TYPE OF COVERAGE: DLA DIRECT, CONUS
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
CLIN 0005: NSN: 5930-01-123-6516
SWITCH, SLIDE
REFERENCE NUMBER: RP001
REFERENCE NUMBER: A1202
REFERENCE NUMBER: RA001
REFERENCE NUMBER: RQ002
REFERENCE NUMBER: RQ011
REFERENCE NUMBER: ZD074
REFERENCE NUMBER: ZD080
REFERENCE NUMBER: CS241
REFERENCE NUMBER: CS199
MASON ELECTRIC CO. 81579 P/N 997-0135
PREP FOR DELIVERY
LINE ITEM 00010 TYPE OF COVERAGE: DLA DIRECT, CONUS
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
CLIN 0006: NSN: 5930-01-189-0493
SWITCH, TOGGLE
REFERENCE NUMBER: RP001
REFERENCE NUMBER: A1202
REFERENCE NUMBER: RA001
REFERENCE NUMBER: RQ011
REFERENCE NUMBER: ZD074
REFERENCE NUMBER: CS241
REFERENCE NUMBER: CS199
CRITICAL APPLICATION ITEM
MASON ELECTRIC CO. 81579 P/N 407-4313
PREP FOR DELIVERY
LINE ITEM 00011 TYPE OF COVERAGE: DLA DIRECT, CONUS
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
CLIN 0007: NSN: 5930-01-296-1138
SWITCH, TOGGLE
REFERENCE NUMBER: RP001
REFERENCE NUMBER: RQ032
REFERENCE NUMBER: RD002
REFERENCE NUMBER: RA001
REFERENCE NUMBER: RQ011
USE MATERIAL PER SAE AMS-QQ-A-250/4 IN LIEU OF QQ-A-250/4
REFERENCE NUMBER: ZD025
REFERENCE NUMBER: ZD074
CRITICAL APPLICATION ITEM
MASON ELECTRIC CO. 81579 P/N 407-4339
IAW REFERENCE DRAWING NR 81755 C12151
REVISION NR F DTD 09/01/1993
PART PIECE NUMBER: C12151-3
IAW REFERENCE DRAWING NR 81755 C12151-3
REVISION NR DTD 01/29/2020
PART PIECE NUMBER:
PREP FOR DELIVERY
LINE ITEM 00014 TYPE OF COVERAGE: DLA DIRECT, CONUS
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
CLIN 0008: NSN: 5905-01-363-0668
RESISTOR, VARIABLE, NONWIRE WOUND, NONPRECISION
REFERENCE NUMBER: RP001
REFERENCE NUMBER: RD002
REFERENCE NUMBER: RA001
REFERENCE NUMBER: RQ011
REFERENCE NUMBER: RQ017
REFERENCE NUMBER: E0116
REFERENCE NUMBER: ZD074
CRITICAL APPLICATION ITEM
MASON ELECTRIC CO. 81579 P/N 971-0001
PREP FOR DELIVERY
LINE ITEM 00015 TYPE OF COVERAGE: DLA DIRECT, CONUS
PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A
UNIT CONT:D4 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:100
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
REFERENCE NUMBER:ZD009
ZZ - ADDITIONAL SPECIAL MARKING:
REFERENCE NUMBER:ZD009
CONTROLLED ITEM. SPECIAL MARKINGS REQUIRED
PER MIL-STD-129, PARAGRAPH 5.4.1.6 (PROTECTED
CARGO): THE ITEM DESCRIPTION (NOMENCLATURE)
SHALL BE OMITTED FROM THE MIL-STD-129 LABEL
FOR ALL SHIPPING CONTAINERS.
40 - OMISSION OF MARKING FOR SENSITIVE,
CONTROLLED, OR PILFERABLE ITEMS PER
MIL-STD-129.
CLIN 0009: NSN: 5930-01-558-4317
SWITCH, TOGGLE
REFERENCE NUMBER: RA001
REFERENCE NUMBER: RP001
REFERENCE NUMBER: RQ011
REFERENCE NUMBER: E0115
REFERENCE NUMBER: ZD074
MASON ELECTRIC CO. 81579 P/N 407-4388
PREP FOR DELIVERY
LINE ITEM 00016 TYPE OF COVERAGE: DLA DIRECT, CONUS
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
*************************************************************************************
GLOSSARY
*************************************************************************************
PACKAGING TEXT
THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:
All DLA Master List of Technical and Quality Requirements take
precedence over ASTM D3951.
Mark and label all packaging and packing in accordance with MIL-STD-129.
The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be
as specified in the contract/purchase order.
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
ITEM DESCRIPTION TEXT
REFERENCE NUMBER RP001
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
REFERENCE NUMBER A1202
Casting/forging may be required to manufacture this NSN. If a
casting/forging is required, tooling is typically involved. The
government may not have this special tooling. For sourcing, tooling,
materials or other information, please contact the appropriate
assistance team: (Aviation, C&E Supply Chains) [email protected]; (Land
& Maritime Supply Chains) [email protected]
REFERENCE NUMBER RA001
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE
ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
REFERENCE NUMBER RQ002
RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
REFERENCE NUMBER RQ011
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
REFERENCE NUMBER ZD080
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
REFERENCE NUMBER CS241
NOTE: THIS IS A RESTRICTED SOURCE ITEM AND
REQUIRES ENGINEERING SOURCE APPROVAL BY THE
GOVERNMENT DESIGN CONTROL ACTIVITY.
REFERENCE NUMBER CS199
ALTERNATE OFFEROR REQUIREMENTS:
THE FOLLOWING DOCUMENTATION IS REQUIRED IN
ACCORDANCE WITH MIL-T-31000. (A) ALL DRAWINGS
AND SPECIFICATIONS REQUIRED FOR MANUFACTURE.
(B) PROCESS/OPERATION SHEETS WHICH DESCRIBE
IN DETAIL EACH CRITICAL PROCESS AND ASSOCIATED
INSPECTION/ACCEPTANCE CRITERIA. (C)
IDENTIFICATION OF SOURCES WHO WILL PERFORM
CRITICAL PROCESSES/OPERATIONS, INCLUDING
SOURCES OF FORGINGS AND CASTINGS. (D) IF
AVAILABLE COPIES OF PURCHASE ORDERS FROM THE
ITEM. (E) A SHOCK EXTENSION REPORT IN
ACCORDANCE WITH MIL-S-901 AND IN A FORMAT AS
SPECIFIED IN DI-ENVR-80706 IS REQUIRED.
IF THE OEM'S DETAILED DRAWINGS ARE NOT
AVAILABLE, THE OFFEROR MUST SUPPLY AN
ENGINEERING ANALYSIS REPORT WHICH DETAILS HOW
THEIR DRAWINGS WERE DEVELOPED. ADDITIONALLY,
IF REVERSE ENGINEERING WAS USED, THE COMPLETE
PROCEDURE WILL BE REPORTED INCLUDING: NUMBER
OF SAMPLES, METHODS AND MEASURES USED, ALL DATA
COMPILED, RATIONALE FOR DIMENSION TOLERANCE
DEVIATION, AND RATIONALE FOR ACCEPTANCE. THIS
DATA WILL BE FORWARDED TO THE ENGINEERING
SUPPORT ACTIVITY FOR EVALUATION.
REFERENCE NUMBER E0201
THIS ITEM MUST BE MANUFACTURED IN ACCORDANCE
WITH THE LIMITED RIGHTS DATA LISTED. THE
GOVERNMENT CANNOT PROVIDE THE DATA. ONLY THOSE
VENDORS WHO HAVE ACCESS TO THE DATA SHOULD
QUOTE.
REFERENCE NUMBER ZD074
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM - (TO INCLUDE 'COMMERCIAL
OF A TYPE')
REFERENCE NUMBER IP025
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
REFERENCE NUMBER E0116
ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE
OFFERS IS NOT AVAILABLE AT THE PROCUREMENT
AGENCY. THE OFFEROR MUST PROVIDE A COMPLETE
DATA PACKAGE INCLUDING DATA FOR THE APPROVED
AND ALTERNATE PART FOR EVALUATION.
REFERENCE NUMBER E0165
THE TECHNICAL DATA CITED IN THIS SOLICITATION IS
NOT COMPLETE, HOWEVER, THE ITEM PROVIDED MUST
MEET THE REQUIREMENTS OF THE CITED TECHNICAL
DATA IN ADDITION TO THE REQUIREMENTS OF THE
PART NUMBERED ITEM LISTED ON THIS SOLICITATION.
REFERENCE NUMBER EVC01
VENDOR ITEM CONTROL DRAWING (NEW CODE)
REFERENCE NUMBER ZD025
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
REFERENCE NUMBER RQ032
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to
export-control of either the International Traffic in Arms regulations
(ITAR) or the Export Administration Regulations (EAR), and cannot be
exported without prior authorization from either the Department of State
or the Department of Commerce. Export includes disclosure of technical
data to foreign persons and nationals whether located in the United
States or abroad. This requirement applies equally to foreign national
employees and U.S. companies and their foreign subsidiaries. DFARS
252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control
technical data to DLA contractors that have an approved US/Canada Joint
Certification Program (JCP) certification, have completed the
Introduction to Proper Handling of DOD Export-Controlled Technical Data
Training and the DLA Export-Controlled Technical Data Questionnaire
(both are available at the web address given below), and have been
approved by the DLA controlling authority to access the
export-controlled data. Instructions for obtaining access to the
export-controlled data can be found at:
https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/
To be eligible for award, offerors and any sources of supply proposed
for use are required to have an approved JCP certification and have
been approved by the DLA controlling authority to access
export-controlled data managed by DLA. DLA will not delay award in
order for an offeror or its supplier to apply for and receive approval
by the DLA controlling authority to access the export-controlled data.
REFERENCE NUMBER PKHAZ
Start of Hazardous Packaging Data
HAZARDOUS PACKAGING STATEMENT
PACKAGING DATA: SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS
MATERIALS PACKAGING REQUIREMENTS.
PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS SHALL COMPLY WITH
APPLICABLE REGULATIONS, I.E., TITLE 49 CODE OF FEDERAL REGULATIONS,
INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO) TECHNICAL INSTRUCTIONS
(EXCLUDING PARAGRAPH 1.4 OF CHAPTERS 1 AND 3), AND INTERNATIONAL
MARITIME DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG COMPLY WITH
UNITED NATIONS (UN) RECOMMENDATIONS ON TRANSPORT OF DANGEROUS GOODS.
WHEN A CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES SHIPMENT THROUGH
A MILITARY AERIAL PORT FOR TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING
SHALL COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS MATERIALS FOR
MILITARY AIR SHIPMENT.
LABELING AND MARKING: ALL INTERIOR AND EXTERIOR CONTAINERS SHALL BE
LABELED AND MARKED AS SPECIFIED IN THE REFERENCED PRODUCT SPE
CIFICATION, AND/OR AS SPECIFIED IN SECTION C OF THE CONTRACT OR ORDER.
IN ADDITION, ALL LABELING AND MARKING SHALL COMPLY WITH THE
REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR, AND, AS APPLICABLE, ICAO
TECHNICAL INSTRUCTIONS, IMDG ANNEX 1, AND/OR DLAI 4145.3.
CERTIFICATION: ALL PACKAGING PERFORMANCE TEST REQUIREMENTS SHALL BE
SUPPORTED BY CERTIFICATES AND REPORTS ATTESTING TO DATE OF TESTING AND
DATA RESULTS OBTAINED FROM TESTING. THE CONTRACTOR'S SIGNED
CERTIFICATION THAT PACKAGE CONFIGURATION MEETS 49 CFR, AND, AS
APPLICABLE, ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS, SHALL BE
INCLUDED ON THE DD FORM 250 (MATERIAL INSPECTION AND RECEIVING REPORT),
OR ANY SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL
CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR INSPECTION BY AUTHORIZED U.
S. GOVERNMENT REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3 YEARS
FROM DATE OF SHIPMENT.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
End of Hazardous Packaging Data
REFERENCE NUMBER RD002
RD002, COVERED DEFENSE INFORMATION APPLIES
REFERENCE NUMBER J5930
PRESERVATION AND PACKAGING SHALL BE IAW THE
LATEST REVISION OF MILITARY SPECIFICATION:
MIL-DTL-28786, FOR SWITCHES.
REFERENCE NUMBER RQ017
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
REFERENCE NUMBER ZD009
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the
Contractor shall apply one of the
assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of
IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit
boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify
Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of
the item being acquired. Placement of the markings shall be in
accordance with paragraph 6.1 of the standard.
(b) Copies of the current version of this standard may be purchased or
downloaded from the Association
Connecting Electronics Industry (IPC), http://www.ipc.org, or the Solid
State Technology Association
(JEDEC), http://www.jedec.org.
REFERENCE NUMBER E0115
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR EVALUATION.