The RFQ will be issued via the Federal business Opportunity (FEDBIZOPPS) website at http://www.fbo.gov/. This requirement will be evaluated using price and past performance as an evaluation factors. Hard copies solicitation will not be issued. It is incumbent upon the contractors to monitor the FEDBIZOPPS website for RFQ release and all subsequent amendments. FEDBIZOPPS also contains an optional automatic notification service. THE ACQUISITION WILL BE SOLICITED AS A TOTAL SMALL BUSINESS SET-ASIDE.
The performance period will be based following Cutter's Availability dates and completion time: USCGC GEORGE COBB (WLM-564) will be available from January 8, 2013 through February 19, 2013 forty-two (42) days after vessel becomes available.
PLACE OF PERFORMANCE:
The place of performance will be at the Cutter's Home Port: USCGC GEORGE COBB (WLM-564), 1001 South Seaside Ave, San Pedro, California 90731.
DESCRIPTION OF WORK
The scope of the acquisition is for the overhauling, cleaning and repairing of various items aboard the USCGC GEORGE COBB (WLM-564) This work will include, but is not limited to:
ITEM DESCRIPTION
D-001 Main Diesel Engine (MDE) Exhaust Stack Uptakes , Clean
D-002 Ship Service Diesel Generator (SSDG) Exhaust Piping , Commercial Clean
D-003 Vent Ducts ( Engine and Motor Room All ) , Commercial Cleaning
D-004 Vent Ducts ( Galley and Pantry Room All ) , Commercial Cleaning
D-005 Anchor Chain and Ground Tackle, Preserve
D-006 Decks - Exterior( Buoy ), Preserve 100%
D-007 Hull Plating Freeboard (Buoy Port Areas), Preserve - Partial (Delete)
D-008 Hot Water Accumulator Tanks, Clean and Inspect
D-009 Hull Fittings (Weight Handling Rigging Hardware), Inspect and Test
D-010 Cargo Hold Deck, Preserve 100%
D-011 Vent Ducts (All Other), Commercial Cleaning
D-012 Hydraulic Chain Stoppers, Overhaul and Repair
D-013 Hydraulic Inhaul Winch, Repair
D-014 Anchor Windlass Inspect, and Repair
D-015 Single Point Davit, Inspect and Repair
D-016 Buoy Crane, Inspect and Repair
D-017 ASW Pump(s), Overhaul
D-018 Deck Covering (Electrical Matting), Remove and Reinstall
D-019 Cargo Hatch and Hawser Pipe, Preserve
D-020 Potable Water Valves, Renew
D-021 Cargo Hatch, Repair and Test
O-00A Composite Labor Rate
D-00B GFP Report
D-00C Travel and Perdiem
The Specification for this project is posted with this pre-solicitation synopsis for review and comments from interested parties.
Potential contractors are Strongly Encouraged to make a Ship Check. For access please contact EMCS James Cullers (310) 521-4580 email: [email protected] or LTJG Robert K. Woods at (510) 637-5852 email: [email protected]
Drawings on CD-ROM will be free of charge to contractors upon request. Contractors may contact Jack Rodman at (510) 637-5988 or email: [email protected]. or Jay McReynolds (510) 637-5975 email: [email protected]
CERTIFICATIONS:
All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures.
NOTICE TO OFFERORS: This solicitation is subject to Avaliability of Funds
For further information or questions regarding this solicitation, please contact Jack Rodman at (510) 637-5988 or via email: [email protected] or Jay McReynolds at (510) 637-5975 or email: [email protected]