STATE OF CALIFORNIA DEPARTMENT OF GENERAL SERVICES REAL ESTATE SERVICES DIVISION PROJECT MANAGEMENT AND DEVELOPMENT BRANCH ADVERTISEMENT FOR STATEMENT OF QUALIFICATIONS Project Number: DGS000000142407 CALIFORNIA HIGHWAY PATROL HAYWARD REPLACEMENT FACILITY HAYWARD, ALAMEDA COUNTY, CALIFORNIA The Department of General Services, Real Estate Services Division - Project Management and Development Branch requests the submittal of qualifications from interested Design-build Entities to provide professional Architectural/Engineering and Construction services for the design and construction of the new California Highway Patrol Replacement Facility in Hayward, Alameda County, California. The California Highway Patrol will operate the new facility. The State of California, through the California Highway Patrol, operates facilities throughout California. Its current offices located at 2434 Whipple Rd, Hayward, CA 94544 and 21020 Redwood Road, Castro Valley, CA 94546 are inadequate to house the number of employees and related equipment, record storage, reference library, evidence rooms, lockers, and other officer support needs. The new Hayward Replacement Facility Project relocates these current facilities to an approximately 6-acre lot located at 25100 Santa Clara Street, Hayward in Alameda County, California. The new facility shall be designed and built to meet or exceed the requirements of the Essential Services Act (ESA). It will include a Main Office Building with attached auto service bays (approximately 44,000 nsf). In addition, the project will include a Radio Vault Building (approximately 750 nsf), a Property Storage Building (approximately 750 nsf), a Vehicle Fueling Area (approximately 3,350 nsf), and a Waste/Recycle Enclosure (approximately 1,450 nsf). The remaining facility will include miscellaneous site improvements including an Antenna Tower assembly (maximum 148 feet tall) and Generator Enclosure (all approximately 39,300 nsf), and site parking (approximately 58,300 nsf). The remaining site area will consist of landscaping, fencing, and storm water management improvements. The State is using the ¿Design-build¿ method of project delivery for the design and construction of the Project. The State will use a two-step process to select the Design-build Entity for the Project: ¿ Step 1 - REQUEST FOR QUALIFICATIONS (RFQ) - pre-qualification of Design-build Entities. ¿ Step 2 - REQUEST FOR PROPOSAL (RFP) - up to the three (3) most qualified Design-build Entities will be invited to submit a proposal for the Project in response to the RFP. The State will request design proposals from the three (3) most qualified Design-build Entities after successfully completing a pre-qualification process. Through the RFP, the successful Design-build Entity for the Project will be selected on a Best Value to the State basis. The State will establish a stipulated sum for the Design-build Entity, estimated to be between $38,500,000.00 and $43,500,000.00. The actual stipulated sum shall be defined in the future RFP. It is anticipated by the State that the final facility design will exceed the requirements set forth in the RFP for energy efficiency, recycling, indoor air quality, and alternative energy systems. Each responding Design-build Entity must submit qualifications for an Architect and the General Contractor, each appropriately licensed in California, as well as qualifications for a Mechanical Engineer, Structural Engineer, Electrical Engineer, Civil Engineer, Landscape Architect, Geotechnical Engineer, (all of which shall be appropriately licensed in California and serve as the Engineers of Record) and a Security Electronics consultant. The Design-build Entity¿s architect shall be required to complete the design and serve as the Architect of Record for the Project. The Design-build Entity may, in addition, submit qualifications of other firms that bring special qualifications to their teams for items such as automotive equipment, fueling systems, low voltage/communications, communication towers, energy efficiency/sustainable (LEED¿), or any other notable design consultant(s), each appropriately licensed in California. These or combinations of the above disciplines may be provided by a single firm or by several firms. A MANDATORY RFQ Briefing Conference is scheduled for 10:00 A.M., September 18, 2019, at the Alameda County Sheriff¿s OES Building, 4985 Broder Boulevard, Dublin, CA 94568. This conference is intended to review the RFQ/RFP process and submittal requirements, general project scope, the Essential Services Act, the State¿s Small Business and Disabled Veterans Business Enterprises (DVBE) program goals and requirements, and the qualification/proposal process. The Design-build contract award is currently scheduled for the winter of 2019. All RFQ submittals received from Design-build Entities that do not attend the mandatory briefing will be returned without review. Design-build Entities that attend the mandatory RFQ briefing conference may obtain an RFQ package by downloading it from the eProcurement Division¿s California State Contracts Register on the Internet at http://www.caleprocure.ca.gov/. This is the preferred point of contact. The RFQ package may also be obtained by sending a request to the contact listed below. E-mail requested packages will be provided in Word 2010 format. Please include AD Number, contact person¿s name, firm name, firm¿s Federal Employer Identification Number (FEIN), mailing address and phone number. Request processing will be delayed if all information is not provided. Submittal Deadline: October 24, 2019, 5:00 P.M., PT Department: General Services Contact: Michael Siemering, Project Director E-mail: [email protected] Phone: (916) 376-1628 Internet: http://www.caleprocure.ca.gov/ Address for Submission: Department of General Services Real Estate Services Division Project Management & Development Branch Attn: Karena Benskin, Contracts Analyst 707 3rd Street, 4th Floor West Sacramento, CA 95605 E-mail [email protected] Phone: (916) 375-5265

Bid Protests Not Available