Scope of Work:  The Moose Creek Ranger District, Fenn Ranger Station will be procuring one tractor with attachments.
Specifications:
Tractor Specifications
1. Transmission: Hydrostatic Transmission, No Clutch. Hydrostatic pedal operate. 3-range speed.
2. Air Cleaner: Dry-dual element.
3. Alternator: 45 Amp
4. Mechanical Front Wheel Drive (4WD) Bevel Gear Type. Turning Radius 8.9ft.
5. Engine, 4 Cylinder Turbo Charged. 148.6 cubic inch. 51.3 HP. Block Heater. Engine Hood, full open type.
6. PTO: Rated 44.2hp @540rpm. Live independent, hydraulic PTO with PTO brake, wet clutch.
7. Brakes: Mechanical wet disc.
8. Differential Lock: Rear standard (mechanical)
9. Steering: Hydrostatic power type. 4.9gpm.
10. Hydraulics: 9.5gpm pump capacity. Lift Capacity at 24 in. behind lift point 2310lbs. 1 Rear remote valve.
11. 3-Point Hitch Category I & II
12. Tires Front/Rear: 9.5-16/14.9-26 agriculture type.
13. Fuel Tank Capacity: 13.5 + US gal.
14. Operators Station: Flat w/Hanging pedals. Foldable ROPS. Seat Belt.
15. Wheel Base: 74.6
16. Minimum Width: 69.7in.
17. Minimum Ground Clearance: 15.2in.
Loader Specifications
1. Must be compatible with and be mounted on above tractor.
2. Hood/Grill Guard.
3. Joy Stick Control
4. Lift Capacity 2200lbs+.
5. 72" Bucket w/dual lever skid steer coupler.
6. Lift height under level bucket 100in.+
Post Hole Digger Specifications
1. CAT. 1 OR 2 HITCH.
2. 2 7/8" YOKE TUBING 3/16"+ Wall thickness for strength.
3. 3 1/2" REINFORCED BOOM TUBING 7/32" Wall tubing for strength.
4. 9" AUGER 1/4IN THICK FLIGHTING Constant thickness on 1/4" flighting vs. tapered.
5. REPLACEABLE HARDENED STEEL POINTS ON AUGER.
6. 2" OUTPUT SHAFT.
7. CAT. 3 DRIVELINE WITH SHEAR-PIN.
Rear Blade Specifications
1. Cat. 1 or 2 Hitch and Rated horsepower described in tractor specs
2. 84" wide.
3. Blade angles left and right manually up to 45 degrees in forward position and 30 degrees in reverse position (7 forward positions in 15 degree increments and 3 reverse positions in 30 degree increments)
4. Blade off sets left or right up to 26"
5. Blade tilts up or down up to 15 degrees (5 positions: center, 2 clockwise, and 2 counterclockwise.
6. 17" High Moldboard

Bid Protests Not Available