Federal Bid

Last Updated on 23 Aug 2012 at 8 AM
Combined Synopsis/Solicitation
Location Unknown

Portable Fuming System

Solicitation ID 0745125026
Posted Date 03 Aug 2012 at 3 PM
Archive Date 23 Aug 2012 at 5 AM
NAICS Category
Product Service Code
Set Aside No Set-Aside Used
Contracting Office Fbi-Jeh
Agency Department Of Justice
Location United states
PLEASE READ THIS ENTIRE NOTICE CAREFULLY AS IT CONSTITUTES THE ONLY NOTICE THAT WILL BE ISSUED. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information in this request. This announcement constitutes the only solicitation. This procurement is being conducted under Federal Acquisition Regulation parts 12 and 13. The Federal Bureau of Investigation is issuing this acquisition as a Request for Quote (RFQ) under solicitation number 0745125026

The FBI's ERT Unit is seeking to procure QTY (80) CAptureTM Portable Fuming System that meets  the following mandatory technical specification:

• Must operate on 110V AC electrical power.
• Must also operate on a supplied field battery power kit.
• Must have at least an 8" x 8" x 16" clear polycarbonate fuming chamber.
• Must be a collapsible design with a handle for easy transport.
• Must have a microprocessor controlled heater programmable in one degree increments from 120 - 350 degrees Fahrenheit.
• Heater receptacle must hold at least two heater pans.
• Fuming chamber must have an adjustable shelf and hook.
• Unit must have an LCD Display showing set point or actual heater temperature.
• Must have a leveling foot with locking pin.
• Must have a built-in exhaust blower.
• Must have a particulate/activated carbon filter cartridge for exhaust.
• Filter must have capacity for at least 100 development cycles.
• Shipping weight must not exceed 35 pounds.
• Unit weight must not exceed 25 pounds.
• System must have at least a 2 year warranty

***Brand Name or equal items are acceptable for this procurement. If an equal item is proposed specs must be included with the quote to show that it is an equal item. Quotation shall provide a point-by-point comparison to each item listed in the below mandatory technical specifications. A general overview, general comparison, or statement such as "able to provide the requirements" or "meets or exceeds minimum requirements" is unacceptable and will not be evaluated for potential acceptance.

 

***In order to be considered for award the offeror must provide all required supplies to the exact specification listed above***
Award will be made based on the lowest price technically acceptable price quote.
Shipping: All Items shall be shipped to-1000 Falls Run Drive Fredericksburg, VA 22406
Submission of Quotes:
All quotes must be submitted via e-mail to Contracts Specialist at [email protected] no later than Wednesday, August 8, 2012 at 9:00 is Eastern Standard Time. Quotes will be evaluated lowest price technically acceptable.
Contract will be awarded as a commercial item in accordance with Federal Acquisition Regulation, Parts 12 and 13. All contractors anticipating award, must be registered in the Central Contractor Registration (CCR) Database. This solicitation incorporates several clauses by reference. The full text of a clause may be accessed electronically on the Internet address: www.arnet.gov. FAR provisions at 52.212-1 Instructions to Offerors-Commercial Items (June 2008), 52.212.3 Offeror Representation and Certifications - Commercial Items (Aug 2009), 52.212-4 Contract Terms and Conditions - Commercial Items (June 2010) and 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items (July 2010) as well as 52.212-2 Evaluation - Commercial Items (Jan 1999) are incorporated by reference.

Bid Protests Not Available

Similar Past Bids

Washington District of columbia 03 Apr 2009 at 1 PM
Location Unknown 24 Aug 2018 at 7 AM
Bureau Illinois 23 Apr 2015 at 8 PM
Champaign Illinois 19 May 2020 at 7 PM
Location Unknown 30 Aug 2017 at 4 PM

Similar Opportunities

Lubbock Texas 10 Jul 2025 at 1 PM
Medical Science Building - 7E Renovation (CP2400920) On January 26th 2024 a fire and explosion occurred on the 7th floor of MSB in the east wing laboratories. Physical damage was extensive within the high impact area of approximately 5000 SF impacting interior construction including mechanical electrical and plumbing infrastructure, exterior windows, casework and finishes. ed and destroyed lab casework, and damaged interior finishes. More limited damage extended to other areas of the east wing. Existing windows, mechanical, electrical, plumbing, fire suppression, and fire alarm systems were damaged and will need to be replaced in the high impact area and partially replaced or repaired where the impacts of the incident extended to other areas of the 7thy floor. The repair project will return the 7th floor east wing to service for research. The project scope includes renovating approximately 11,800 square feet of high and low impact areas of the 7th floor. The project includes an alternate restroom renovation designed to meet current codes. Infrastructure repair and replacement includes wet pipe fire suppression, acid waste & vent stack replacement, sanitary waste & vent stack replacement, domestic water and lab water systems, lab gas replacement, plumbing equipment replacement, telecom infrastructure, and window replacement. Laboratory repairs include fume hood and laboratory replacement, and required laboratory sinks, eye wash, and infrastructure needed to support specialized laboratory equipment. The project will develop two separate sets of bid documents for competitive bidding, one of which will capture the preexisting laboratory build out and one that modifies the previous existing laboratory design to more closely align with ongoing lab renovations in other areas of the building and the long range masterplan for the Medical Science Building. Base Estimate & Alternates: $4,180,000.00
Location Unknown 29 Jul 2025 at 4 AM
Hampton Virginia 14 Jul 2025 at 4 AM (estimated)