Item Name: Plug, Tip (see Procurement Item Description below)
NSN: 5935-00-572-5174
Destination Information: Various DLA Stocking Locations
AMC/AMSC Code: 1T
NAICS Code: 334417; the small business size standard is 1,000 employees.

This acquisition is for supplies for which the Government does not possess complete, unrestrictive
technical data; therefore, the Government intends to solicit and contract with only approved sources
under the authority of 10 U.S.C. 2304(c)(1). FOB will be at Origin and Inspection/Acceptance will be at
Destination. The proposed procurement will be a Long Term Contract (LTC), and will be for a total of five
(5) years, consisting of three (3) Base Years and two (2) Option Years. The Option Years may be exercised
at the discretion of the Government. The Government requested delivery for this item is 90 days.

Based upon market research, the Government is using the policies contained in FAR Part 15 -
Contracting by Negotiation - in its solicitation for the described supplies or services.

This will be solicited as an unrestricted acquisition, utilizing other than full & open competition. The
solicitation will be available at https://www.dibbs.bsm.dla.mil/rfp/default.aspx on or about its
estimated issue date of September 16, 2019. Specifications, plans or drawings are not available.

Product Item Description (PID), Packaging & Marking

*** LTC PID Packaging Consolidated Text ***
-
PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION
AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN: 5935-00-572-5174

PLUG, TIP

REFERENCE NUMBER:RP001
REFERENCE NUMBER:RA001
REFERENCE NUMBER:RQ002
REFERENCE NUMBER:RQ011
REFERENCE NUMBER:RQ012
REFERENCE NUMBER:RQ017
REFERENCE NUMBER:ZD074
REFERENCE NUMBER:ZD080
REFERENCE NUMBER:ZD025
REFERENCE NUMBER:E0114
REFERENCE NUMBER:E0198

CAGE 043L3 PART NUMBER M83413/4-1

CRITICAL APPLICATION ITEM

IAW BASIC SPEC NR MIL-DTL-83413/4E(2)
REVISION NR E DTD 05/29/2019
PART PIECE NUMBER: M83413/4-1

IAW REFERENCE SPEC NR MIL-DTL-83413C(1) SUP 1
REVISION NR C DTD 06/07/2017
PART PIECE NUMBER: M83413/4-1

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:005

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS
MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS
SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,
TITLE 49 CODE OF FEDERAL REGULATIONS,
INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)
TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4
OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME
DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG
COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS
ON TRANSPORT OF DANGEROUS GOODS. WHEN A);
CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES
SHIPMENT THROUGH A MILITARY AERIAL PORT FOR
TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL
COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS
MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR
CONTAINERS SHALL BE LABELED AND MARKED AS
SPECIFIED IN THE REFERENCED PRODUCT
SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D
OF THE CONTRACT OR ORDER. IN ADDITION, ALL
LABELING AND MARKING SHALL COMPLY WITH THE
REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,
AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,
IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST
REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES
AND REPORTS ATTESTING TO DATE OF TESTING AND
DATA RESULTS OBTAINED FROM TESTING. THE
CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE
CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,
ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,
SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL
INSPECTION AND RECEIVING REPORT), OR ANY
SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL
CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR
INSPECTION BY AUTHORIZED U. S. GOVERNMENT
REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3
YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,
IN ACCORDANCE WITH FED-STD-313, THE MATERIAL
SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH "ASTM D3951."

*************************************************************************************

GLOSSARY

*************************************************************************************
PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:
Markings Paragraph
When ASTM D3951, Commercial Packaging is specified, the following apply:
•,,All Section "D" Packaging and Marking Clauses take precedence over
ASTM D3951.
•,,In addition to requirements in MIL-STD-129, when Commercial Packaging
is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be "CP" Commercial Pack.
•,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified
in the contract take precedence over QUP in ASTM D3951.

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE
ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER RQ012

RQ012: QUALIFIED PRODUCTS LIST (QPL) CONNECTOR ASSEMBLIES AND QPL
ELECTRICAL CONTACTS. THIS IS A QUALIFIED ITEM. QUALIFICATION
REQUIREMENTS IN PROCUREMENT NOTE H01 "QUALIFIED PRODUCTS LIST (QPL) FOR
FEDERAL STOCK CLASS (FSC) 5935 CONNECTOR ASSEMBLIES AND CONTACTS" APPLY.

REFERENCE NUMBER RQ017

RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING

REFERENCE NUMBER ZD074

THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM - (TO INCLUDE 'COMMERCIAL
OF A TYPE')

REFERENCE NUMBER ZD080

SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER ZD025

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

REFERENCE NUMBER E0114

THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED-
ONLY ITEMS.

REFERENCE NUMBER E0198

THIS NSN IS LISTED AS A PRIMARY QPL OR QML THEREFORE
THE QUALIFIED PRODUCTS LIST OR QUALIFIED MANUFACTURERS
LIST IS APPLICABLE.

REFERENCE NUMBER IP025

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS