The Contractor shall accomplish the following tasks:

The Contractor is responsible for applying a bituminous seal coat with an additional fog seal on the asphalt access road (31st St. SE) and crest road from US Highway 52/281 through the project to the parking area at the west end of Pipestem Dam.  This also includes the Pipestem Dam office entrance road.

For site visit information please refer to clause 52.236-27 within the solicitation.

• The bituminous seal coat shall consist of emulsified asphalt applied to the existing asphalt pavement at a rate of 0.4 gallons per SY. After the application of the emulsified asphalt, Class 41 Aggregate shall be applied uniformly at a rate of 25 pounds per SY onto the emulsified asphalt with an aggregate spreader. The aggregate will be rolled with a self-propelled pneumatic-tired roller immediately behind the spreader and continue for a minimum of four complete passes. Following preparation of the surface, a water diluted asphalt emulsion Fog Seal shall be applied at a rate 0.05 Gallons per SY.

• After minimum cure time of the Fog Seal the contractor shall apply roadway pavement marking as per NDDOT Section 762 Pavement Marking and Detail D-762-4 Rural Roadway.  
• A single 4-inch white line along both shoulders and centerline marking as per Table 1 located on the drawings.

Site visit information will be issued with the solicitation.