Point Of Contact Not Available

PURCHASING CITY OF SULPHUR SULPHUR, LA. 70663 Is accepting bids on: ANNUAL SUPPLY OF PIPES AND FITTINGS This proposal will be received by THE CLERK OF THE COUNCIL 101 N. HUNTINGTON ST. SULPHUR, LA. 70663 UNTIL 10:00 AM Friday, November 3rd AT WHICH TIME BIDS WILL BE PUBLICLY OPENED AND READ ALOUD Advertisement in the Official Journal Southwest Daily News THIS IS THE BID PROPOSAL OF FIRM: _______________________________________________________________ ADDRESS: __________________________________________________________ DATE: ______________________________________________________________ TELEPHONE: _________________________________________________________ FAX: ­­­­­­­­___________________________________________________________ CITY OF SULPHUR PURCHASING REGULATIONS BID FORMS: The City assumes no responsibility for failure to send proposals. Proposals and specifications can be obtained at the Purchasing Department or electronically at www.centralauctionhouse.com. Full information or any questions answered by contacting the Purchasing Department, 101 N Huntington St., Sulphur, LA 70663. Bidders are advised to familiarize themselves with these purchasing regulations of the City of Sulphur and particularly those provisions with respect to strict compliance with the bid proposal. These bid proposal forms shall remain together with the complete contract documents as originally issued. Copies of addenda, if any, shall be attached to the complete forms submitted. Altered or incomplete proposals, or use of substitute forms or documents, will render the bid irregular. In an effort to streamline the process for contracting with the City of Sulphur and in accordance with Act No. 590 of the 2008 Regular Session of the Louisiana Legislature, electronic copies of bid solicitation documents, including general and technical specifications, and technical drawings or plans, bid/proposal forms, submittal instructions, and any addenda revisions to the original specifications may be viewed online, downloaded and printed. The new system will provide prospective bidders quicker access to solicitation information and documents. Bidders must self-register online. This information may be accessed through www.centralauctionhouse.com. Bids may be submitted on forms furnished by this office fully filled in as to the delivery date etc. An original signature is to be affixed to each copy of the bid submitted to the Clerk of the Council, City Hall. The bidder shall be responsible for all errors or omissions in proposal. LATE BIDS: No bid under any circumstances will be received or considered after the appointed hour. The method of delivery of the bid is the responsibility of the bidder. At any time prior to the schedule closing time for receipt of proposals, any bidder may withdraw his proposal. After scheduled closing time for receipt of proposals or before award of the contract, no bidder will be permitted to withdraw his proposal unless said award is delayed for a period exceeding thirty (30) days. TAXES: All purchases made directly by the City of Sulphur are exempt from all taxes. Purchases made by contractors or subcontractors, on behalf of the City of Sulphur for City projects, are subject to all applicable sales tax. Each BID MUST BE ACCOMPANIED BY A CERTIFIED CHECK, CASHIER’S CHECK, OR BIDDERS BOND. BIDS SUBMITTED WITHOUT BIDDERS BOND WILL BE REJECTED. BID BONDS SUBMITTED MUST BE IN ACCORDANCE WITH ACT 139 WHICH REQUIRES THAT BID BONDS BE FROM SURETY OR INSURANCE COMPANIES INCLUDED IN THE U. S. TREASURY DEPARTMENT’S FINANCIAL MANAGEMENT SERVICE LIST OR BY A LOUISIANA DOMICILED INSURANCE COMPANY WITH AT LEAST AN A- RATING IN THE A.M. BEST’S KEY RATING GUIDE. Amount shall be not less than five percent (5%) of the total bid or two thousand dollars ($2,000.00) (whichever is the lesser amount) and made payable to the CITY OF SULPHUR. In the case of items FOR SALE BY THE CITY OF SULPHUR, the successful bidder will be required to deposit CASH, CERTIFIED CHECK, OR CASHIER’S CHECK in the full amount immediately upon notification of acceptance (check made payable to the CITY OF SULPHUR). Surplus sale items offered as, is, where is. This provision does NOT apply to bids for labor only. This bid shall be firm for the calendar year of 2024 and be subject to extension by agreement between the City and the bidder. Any proposal for construction or doing of public work shall require a written contract, certificates of liability of insurance, and a Performance bond. NET PRICES: Bid prices, unless otherwise specified, must be net including all transportation and handling charges fully prepaid by contractor to destination and subject only to cash discount. Bid prices shall be firm for acceptance for a minimum of forty-five (45) days. Bids containing “payment in advance” or “C.O.D.” requirements may be rejected. Payments on the awarded bids shall be made upon delivery of equipment, supplies and/or services in accordance with the established “NET 30” payment procedures of the Department of Finance of the City of Sulphur. NEW PRODUCTS: Unless specifically called for in the solicitation, all products for purchase shall be new, never previously used, and the current model and/or packaging. No remanufactured, demonstrator, used or irregular product shall be considered for purchase unless otherwise specified in the invitation. The manufacturer’s standard warranty shall apply unless otherwise specified in the invitation. The city reserves the right to divide items to avail themselves of the lowest bid. Bids will be evaluated by the City based on cost, quality, and adaptability of the particular material. The City reserves the right to reject any or all bids, waive any technicalities, and select the material that best suits their need, whether the price is the lowest or not. Paper bids are to be submitted in a SEALED ENVELOPE to the Clerk of the Council, City Hall, 101 N Huntington Street, Sulphur, Louisiana 70663, on or before date and time specified in the proposal. The outside of the sealed envelope must reflect the name of the bidder, the item(s) for which the bid is submitted (see cover page of bid proposal). The method of submission of the bid is the responsibility of the bidder. When applicable, if item, product and/or service are not available locally, according to State Bid Laws: Louisiana Revised Statue 38:2251: preference is hereby given to materials, supplies, and provisions, produced, manufactured, or grown in Louisiana, quality being equal to articles offered by competitors outside of the State. DELIVERY DEFAULT: Forfeiture of the successful bidder’s cashier’s check or certified check could result upon failure to deliver by firm delivery date quoted in bid unless extension of time is approved by the Mayor. If a bid bond is furnished, and the contractor fails to deliver by firm delivery date quoted in bid (unless extension of time is approved by the Mayor), the contractor will make payment in the amount of five percent (5%) of his bid price, within fifteen (15) days after written notice is given. Should it be necessary to file suit for collection thereof, attorney’s fees in the amount of twenty-five percent (25%) of the amount of the bid bond shall be due and payable. The undersigned certifies that he has carefully examined the instructions to bidders, terms, and specifications applicable to and made part of this proposal. He further certifies that the prices shown in the schedule of items on which he is bidding are in full accordance with the conditions, terms, and specifications of this proposal, and that any exceptions taken thereto may disqualify this bid. SIGNED: ___________________________________________________________ DATED: ___________________________________________________________ SECTION TOTAL RECAP TOTAL BID FOR SECTION I $________________________________________ (PVC SCH 40) TOTAL BID FOR SECTION II $______________________________ (HAYS BRASS) TOTAL BID FOR SECTION III $______________________________ (BRASS CURB, CORP, & CHECK VLVS) TOTAL BID FOR SECTION IV $______________________________ (METER & VALVE BOXES) TOTAL BID FOR SECTION V $______________________________ (MJ FITTINGS) TOTAL BID FOR SECTION VI $______________________________ (F.C. CLAMPS) TOTAL BID FOR SECTION VII $______________________________ (RUBBER COUPLINGS & INSERTATEES ) TOTAL BID FOR SECTION VIII $_____________________________ (HYDRANTS-VALVES) TOTAL BID FOR SECTION IX $______________________________ (METERS) TOTAL BID FOR SECTION X $______________________________ (PIPE) TOTAL BID FOR SECTION XI $______________________________ (SADDLES) TOTAL BID FOR SECTION XII $_____________________________ (TOOLS) TOTAL BID FOR SECTION XIII $_____________________________ (PAINTS) TOTAL DELIVERED PRICE FOR ALL SECTIONS (FOB DESTINATION) $_______________________________ FIRM’S LEGAL NAME: _____________________________________________ PLEASE NOTE DESCRIPTION: Brass goods furnished under this specification shall be new and unused. All fittings shall conform to ANSI/AWWA Standard C800, latest revision. All brass in contact with potable water must have a maximum lead content of 0.25% by weight. DESCRIPTION: Mueller Super Centurion 250 shall be considered an equal to the specified hydrants. FIRM’S LEGAL NAME: ___________________________________________________________ SECTION I PVC SCH 40 FITTINGS ITEM QUANTITY ITEM DESCRIPTION UNIT COST EXTENSION NO. & UNIT 16 ADAPTER, FEMALE 3/4" SCH. 40 PVC WORDS: __________________________________$____________$_________ 2. 80 ADAPTER, MALE 3/4" SCH. 40 PVC WORDS: __________________________________$____________$_________ 3. 6 ADAPTER, FEMALE 1" SCH. 40 PVC WORDS: __________________________________$____________$_________ 4. 13 ADAPTER, MALE 1" SCH 40 PVC WORDS: __________________________________$____________$_________ 5. 1 ADAPTER, FEMALE 2" SCH. 40 PVC WORDS: __________________________________$____________$_________ 6. 8 ADAPTER, MALE 2" SCH. 40 PVC WORDS: __________________________________$____________$_________ 7. 90 ADAPTER, FEMALE 4" SCH. 40 PVC WORDS: __________________________________$____________$_________ 8. 70 ADAPTER, FEMALE 6” SCH. 40 PVC WORDS: __________________________________$____________$_________ 9. 5 BENDS, 1/8, 3/4” 45 SCH. 40 PVC WORDS: __________________________________$____________$_________ 10. 13 BENDS, 1/4, 3/4” 90 SCH 40 PVC WORDS: __________________________________$____________$_________ 11. 12 BENDS, 1/4, 1” 90 SCH 40 PVC WORDS: __________________________________$____________$_________ 12. 3 BENDS, 1/8, 2” 45 SCH 40 PVC WORDS: __________________________________$____________$_________ 13. 9 BENDS, 1/4, 2” 90 SCH 40 PVC WORDS: __________________________________$____________$_________ 14. 20 BENDS, 22 ½”, 4" SCH. 40 PVC WORDS: __________________________________$____________$_________ 15. 12 BENDS, 1/8, 4" 45 SCH 40 PVC WORDS: __________________________________$____________$_________ 16. 3 BENDS, 1/4, 4" 90 SCH 40 PVC WORDS: __________________________________$____________$_________ PVC SCH 40 FITTINGS ITEM QUANTITY ITEM DESCRIPTION UNIT COST EXTENSION NO. & UNIT 17. 5 BENDS, 22 ½”, 6” SCH 40 PVC WORDS: __________________________________$____________$_________ 18. 10 BENDS, 1/8, 6” 45 SCH 40 PVC WORDS: __________________________________$____________$_________ 19. 5 BENDS, 1/4, 6" 90 SCH. 40 PVC WORDS: __________________________________$____________$_________ 20. 1 CAPS, DOME 6” SCH 40 PVC WORDS: __________________________________$____________$_________ 21. 18 CEMENT, CLEAR PVC 16 OZ CAN WORDS: __________________________________$____________$_________ 22. 42 PRIMER, PURPLE PVC SCH 40 AND 80, 16 OZ CAN WORDS: __________________________________$____________$_________ 23. 32 CEMENT GLUE BLUE RAIN-R-SHINE 8 OZ CAN WORDS: __________________________________$____________$_________ 24. 21 RECTORSEAL #5 16 OZ CONTAINER WORDS: __________________________________$____________$_________ 25. 4 COUPLING, 1/2” PVC FLOW CONTROL COMP. TYPE WORDS: __________________________________$____________$_________ 26. 123 COUPLING, 3/4” PVC FLOW CONTROL COMP. TYPE WORDS: __________________________________$____________$_________ 27. 42 COUPLING, 1” PVC FLOW CONTROL COMP. TYPE WORDS: __________________________________$____________$_________ 28. 1 COUPLING, 1 ½” PVC FLOW CONTROL COMP. TYPE WORDS: __________________________________$____________$_________ 29. 51 COUPLING, 2” PVC FLOW CONTROL COMP. TYPE WORDS: __________________________________$____________$_________ 30. 2 COUPLING, 1/2” SCH 40 PVC GLUE ON WORDS: __________________________________$____________$_________ 31. 14 COUPLING, 3/4” SCH 40 PVC GLUE ON WORDS: __________________________________$____________$_________ PVC SCH 40 FITTINGS ITEM QUANTITY ITEM DESCRIPTION UNIT COST EXTENSION NO. & UNIT 32. 5 COUPLING, 1” SCH 40 PVC GLUE ON WORDS: __________________________________$____________$_________ 33. 5 COUPLING, 2” SCH 40 PVC GLUE ON WORDS: __________________________________$____________$_________ 34. 16 COUPLING, 4” SCH 40 PVC GLUE ON WORDS: __________________________________$____________$_________ 35. 13 COUPLING, 6” SCH 40 PVC GLUE ON WORDS: __________________________________$____________$_________ 36. 73 NIPPLE, 3/4” x 6” SCH 80 PVC HEX WORDS: __________________________________$____________$_________ 37. 19 NIPPLE, 1” X 6” SCH 80 PVC WORDS: __________________________________$____________$_________ 38. 39 NIPPLE, 2” X 4” SCH 80 PVC WORDS: __________________________________$____________$_________ 39. 100 PLUG, 4” THREADED SCH 40 PVC WORDS: __________________________________$____________$_________ 40. 88 PLUG, 6” THREADED SCH 40 PVC WORDS: __________________________________$____________$_________ 41. 2 TEE, 1” SCH 40 PVC WORDS: __________________________________$____________$_________ 42. 4 TEE, 2” SCH 40 PVC WORDS: __________________________________$____________$_________ 43. 1 TEE, 6” X 6” SCH 40 PVC WORDS: __________________________________$____________$_________ 44. 2 TEE, 8” X 6” SCH 40 PVC WORDS: __________________________________$____________$_________ 45. 50 WYE, 4” SCH 40 PVC WORDS: __________________________________$____________$_________ 46. 40 WYE, 6” SCH 40 PVC WORDS: __________________________________$____________$_________ PVC SCH 40 FITTINGS ITEM QUANTITY ITEM DESCRIPTION UNIT COST EXTENSION NO. & UNIT 47. 2 WYE, 8” X 6” SCH 40 PVC WORDS: __________________________________$____________$_________ 48. 13 REDUCER BUSHING 6” X 4” PVC SCH 40 WORDS: __________________________________$____________$_________ 49. 57 STREET ELL 1/8 6” 45 BEND SCH 40 PVC WORDS: __________________________________$____________$_________ 50. 63 STREET ELL 1/8 4” 45 BEND SCH 40 PVC WORDS: __________________________________$____________$_________ 51. 21 ADAPTER REDUCER ¾” X 1” (MALE X SLIP) WORDS: __________________________________$____________$_________ 52. 3 ADAPTER REDUCER 1” X ¾” (MALE X SLIP) WORDS: __________________________________$____________$_________ 53. 6 REDUCER BUSHING 1” X ¾” (SP X S) WORDS: __________________________________$____________$_________ 54. 1 REDUCER BUSHING 2” X 1-½” (SP X S) WORDS: __________________________________$____________$_________ 55. 1 ADAPTER, FEMALE 4” SDR 35 (SWR HUBFIPT THRD) P1404 WORDS: __________________________________$____________$_________ 56. 1 ADAPTER, FEMALE 6” SDR 35 (SWR HUBFIPT THRD) P1406 WORDS: __________________________________$____________$_________ 57. 1 BENDS 1/8, 4” 45 SDR 35 HXH P504 WORDS: __________________________________$____________$_________ 58. 1 BENDS 1/8, 6” 45 SDR 35 HXH P506 WORDS: __________________________________$____________$_________ 59. 1 STREET ELL 1/4 4” 90 BEND SDR 35 SXH P224 WORDS: __________________________________$____________$_________ 60. 1 STREET ELL 1/4 6” 90 BEND SDR 35 SXH P226 WORDS: __________________________________$____________$_________ 61. 1 WYE 4” PVC SDR35 45 HXHXH P304 WORDS: __________________________________$____________$__________ PVC SCH 40 FITTINGS ITEM QUANTITY ITEM DESCRIPTION UNIT COST EXTENSION NO. & UNIT 62. 1 WYE 6” PVC SDR35 45 HXHXH P306 WORDS: __________________________________$____________$__________ 63. 1 PLUG 4” THREADED SDR 35 P1154 WORDS: __________________________________$____________$__________ 64. 1 PLUG 6” THREADED SDR 35 P1156 WORDS: __________________________________$____________$__________ 65. 1 4” X 4” ADAPTER SLEEVE SPIGOT X SOLVENT SDR35 P1208 WORDS: __________________________________$____________$__________ 66. 1 6” X 6” ADAPTER SLEEVE SPIGOT X SOLVENT SDR35 P1209 WORD: ___________________________________$____________$__________ TOTAL BID ON SECTION I $______________________ SECTION II BRASS ADAPTERS Description: Brass goods furnished under this specification shall be new and unused. All fittings shall conform to ANSI/AWWA Standard C800, latest revision. All brass in contact with potable water must have a maximum lead content of 0.25% by weight. ITEM QUANTITY ITEM DESCRIPTION UNIT COST EXTENSION NO. & UNIT 12 ADAPTER, FEMALE, 3/4" MUELLER OR APPROVED EQUAL WORDS: __________________________________$____________$_________ 2. 700 ADAPTER, MALE 3/4" MUELLER OR APPROVED EQUAL WORDS: __________________________________$____________$_________ 3. 7 ADAPTER, FEMALE, 1" MUELLER OR APPROVED EQUAL WORDS: __________________________________$____________$_________ 4. 90 ADAPTER, MALE, 1" MUELLER OR APPROVED EQUAL WORDS: __________________________________$____________$_________ 5. 3 ADAPTER, FLAIR C COMP. 3/4" 15071 MUELLER OR APPROVED EQUAL WORDS: __________________________________$____________$_________ 6. 9 ADAPTER, FLAIR C COMP. 1” 150711 MUELLER OR APPROVED EQUAL WORDS: __________________________________$____________$_________ 7. 9 ADAPTER, FEMALE 2” C-14-77 MUELLER OR APPROVED EQUAL WORDS: __________________________________$____________$_________ 8. 20 ADAPTER, MALE 2” H15428 MUELLER OR APPROVED EQUAL WORDS: __________________________________$____________$_________ 9. 300 UNION 3/4” MUELLER OR APPROVED EQUAL WORDS: __________________________________$____________$_________ 10. 46 UNION 1” MUELLER OR APPROVED EQUAL WORDS: __________________________________$____________$_________ 11. 3 UNION, 2” #C 44-77 MUELLER OR APPROVED EQUAL WORDS: __________________________________$____________$_________ BRASS ADAPTERS ITEM QUANTITY ITEM DESCRIPTION UNIT COST EXTENSION NO. & UNIT 12. 112 NUT GASKET ASSEMBLY 3/4” MUELLER OR APPROVED EQUAL WORDS: __________________________________$____________$_________ 13. 7 NUT GASKET ASSEMBLY 1” MUELLER OR APPROVED EQUA WORDS: __________________________________$____________$_________ 14. 8 REDUCER 3/4” X 1” CTS PJ COUPLING BRASS MUELLER OR APPROVED EQUAL WORDS: __________________________________$____________$_________ 15 7 TEE, 3/4” COMPRESSION FITTING BRASS MUELLER OR APPROVED EQUAL WORDS: __________________________________$____________$_________ TOTAL BID ON SECTION II $________________ SECTION III BRASS CORP, CURB STOPS, CHECK VALVES ITEM QUANTITY ITEM DESCRIPTION UNIT COST EXTENSION NO. & UNIT 1. 41 VALVE 3/4" CORP. STOP MUELLER OR APPROVED EQUAL WORDS: __________________________________$____________$_________ 2. 19 VALVE 1" CORP. STOP MUELLER OR APPROVED EQUAL WORDS: __________________________________$____________$_________ 3. 6 VALVE 2" CORP. STOP BIG T HEAD JONES #J1955 W/LOCK WING OR APPROVED EQUAL WORDS: __________________________________$____________$_________ 4. 414 VALVE 3/4" CURB STOP JONES #J1900 W/LOCK WING OR APPROVED EQUAL WORDS: __________________________________$____________$_________ 5. 61 VALVE 1" CURB STOP JONES #J1900 W/LOCK WING OR APPROVED EQUAL WORDS: __________________________________$____________$_________ 6. 25 VALVE 2” CURB STOP BIG T HEAD JONES #J1900 W/LOCK WING OR APPROVED EQUAL WORDS: __________________________________$____________$_________ 7. 18 VALVE 3/4" DUAL CHECK 125 PSI BRASS MALE X FEMALE SCREW (HHC81-333) WORDS: __________________________________$____________$_________ 8. 6 VALVE 1" DUAL CHECK 200 PSI BRASS MALE X FEMALE SCREW (HHC81-444) WORDS: __________________________________$____________$_________ 9. 3 VALVE 2" DUAL CHECK 200 PSI BRASS FEMALE X FEMALE SCREW (014243-2) WORDS: __________________________________$____________$_________ 10. 6 VALVE 4” PVC BACKFLOW WORDS: __________________________________$____________$_________ 11. 2 VALVE 6” PVC BACKFLOW WORDS: __________________________________$____________$_________ 12. 6 VALVE 3/4" DUAL CHECK METER SWIVEL X FEMALE #HHC31-323 WORDS: __________________________________$____________$_________ BRASS CORP, CURB STOPS, CHECK VALVES ITEM QUANTITY ITEM DESCRIPTION UNIT COST EXTENSION NO. & UNIT 13. 4 VALVE 1” DUAL CHECK METER SWIVEL X FEMALE #HHC31-444 WORDS: __________________________________$____________$_________ 14. 9 VALVE 2” DUAL CHECK METER FLANGED X FEMALE H14242 WORDS: __________________________________$____________$_________ 15. 1 VALVE 4” BACKFLOW PREVENTOR DR35 SW SWR HH PLAP0104 WORDS: __________________________________$____________$_________ 16. 1 VALVE 6” BACKFLOW PREVENTOR DR35 SW SWR HH PLAP0106 WORDS: __________________________________$____________$_________ TOTAL BID ON SECTION III $___________________ SECTION IV METER BOXES, VALVE BOXES, MANHOLE COVERS ITEM QUANTITY ITEM DESCRIPTION UNIT COST EXTENSION NO. & UNIT 1. 200 BOX-METER 3/4" BLACK PLASTIC METER BOX WITH LID FOR WATER METER #4401 WORDS: __________________________________$____________$_________ 2. 95 BOX-METER 3/4” BLACK PLASTIC LID ONLY, FOR METER BOX #4401L WORDS: __________________________________$____________$_________ 3. 5 BOX – 3 PC. VALVE BOX TYLER 562-5 W/LID MARKED "WATER" WORDS: __________________________________$____________$_________ 4. 13 BOX-METER, 17 X 20" PLASTIC BOX (JUMBO) COMPLETE FOR 2" WATER METER WORDS: __________________________________$____________$_________ 5. 5 BOX–METER LID ONLY, FOR 17 X 20” PLASTIC BOX WORDS: __________________________________$____________$_________ 7. 2 BOX-METER VMB-3 COMPLETE BOX W/LID (METAL BOX) WORDS: __________________________________$____________$_________ 8. 2 BOX-METER VMB-3 LID ONLY, FOR (METAL BOX) WORDS: __________________________________$____________$_________ 9. 20 BOX-METER VMB-1 COMPLETE BOX W/LID (METAL BOX) WORDS: __________________________________$____________$_________ 10. 5 BOX-METER VMB-1 LID ONLY, FOR (METAL BOX) WORDS: __________________________________$____________$_________ 11. 3 MANHOLE FRAME VM-17 WORDS: __________________________________$____________$_________ 12. 3 MANHOLE COVER LID VM-17 MARKED SEWER ONLY WORDS: __________________________________$____________$_________ 13. 4 RISER BOX 5 ¼” X 2 ¼” CAST IRON WORDS: __________________________________$____________$_________ 14. 3 RISER BOX 5 ¼” X 6” CAST IRON WORDS: __________________________________$____________$_________ METER BOXES, VALVE BOXES, MANHOLE COVERS ITEM QUANTITY ITEM DESCRIPTION UNIT COST EXTENSION NO. & UNIT 15. 2 MANHOLE RISERS 2” x 23 ½” WORDS: __________________________________$____________$_________ 16. 2 MANHOLE RISERS 3” x 23 ½” WORDS: __________________________________$____________$_________ 17. 2 LID FOR 3 PIECE VALVE BOX LID ONLY (MARKED WATER) WORDS: __________________________________$____________$_________ 18. 6 FRAME AND GRATE VULCAN 16 X 16 V-5716 WORDS: __________________________________$____________$_________ 19. 2 FRAME AND GRATE VULCAN 18 X 18 V-5718 WORDS: __________________________________$____________$_________ 20. 1 FRAME AND GRATE VULCAN 24 X 24 V-5724 WORDS: __________________________________$____________$_________ TOTAL BID ON SECTION IV $__________________________ SECTION V M.J. FITTINGS ITEM QUANTITY ITEM DESCRIPTION UNIT COST EXTENSION NO. & UNIT 1. 1 CLAMP, 6" UNDERGROUND W/LUGS #2006 WORDS: __________________________________$____________$_________ 2. 1 CLAMP, 12" UNDERGROUND W/LUGS #2012 WORDS: __________________________________$____________$_________ 3. 25 LUGS, DUC WORDS: __________________________________$____________$_________ 4. 20’ RODS 3/4" THREADED ROD 10ft WORDS: __________________________________$____________$_________ 5. 20 NUTS, 3/4" MACHINE #00035 WORDS: _________________________________$____________$__________ 6. 2 UNI-FLANGE RESTRAINT 6” SERIES UFR1300-C-6-X-I WORDS: _______________________________$______________$__________ 7. 2 TEE 6" X 6" CEMENT LINED M/J W/ACC. #32T06 WORDS: __________________________________$__________$___________ 8. 3 GLAND, 6” MJ (ACCESSORY KIT FITTING) WORDS: __________________________________$__________$___________ 9. 3 GASKET, 6” MJ (ACCESSORY KIT FITTING) WORDS: __________________________________$__________$___________ 10. 22 MJ T-HEAD N&B 3/4" X 3-1/2” (T-BOLT FOR ACC.KITS) WORDS: __________________________________$__________$___________ TOTAL BID ON SECTION V $_________________________ SECTION VI REDI & FULL CIRCLE CLAMPS ITEM QUANTITY ITEM DESCRIPTION UNIT COST EXTENSION NO. & UNIT 1. 50 CLAMP, 3/4" X 3” REDI #245-010503-000 WORDS: __________________________________$____________$_________ 2. 36 CLAMP, 3/4" X 6" REDI #245-010506-000 WORDS: __________________________________$____________$_________ 3. 21 CLAMP, 1" X 6” REDI #245-13206-000 WORDS: __________________________________$____________$_________ 4. 38 CLAMP, 2" X 3” REDI, #245-023803-000 WORDS: __________________________________$____________$_________ 5. 21 CLAMP, 2" X 6” REDI, #245-023806-000 WORDS: __________________________________$____________$_________ ALL FULL CIRCLE CLAMPS MUST HAVE STAINLESS STEEL BOLTS AND MUST BE THE EXACT OD RANGE LISTED BELOW AND ON THE LABELS. 6. 7 CLAMP 2" SS1-2.63 X 8” FULL CIRCLE RANGE 2.35-2.63 WORDS: __________________________________$____________$_________ 7. 8 CLAMP 4" SS1-5.14 X 10” FULL CIRCLE RANGE 4.74-5.14 WORDS: __________________________________$_­­­____________$_________ 8. 3 CLAMP 4" SS1 5.14 X 16” FULL CIRCLE RANGE 4.74-5.14 WORDS: __________________________________$____________$_________ 9. 6 CLAMP 4" SS1 5.60 X 10” FULL CIRCLE RANGE 5.20-5.60 WORDS: __________________________________$____________$_________ 10. 4 CLAMP 6" SS1 7.24 X 10” FULL CIRCLE RANGE 6.84-7.24 WORDS: __________________________________$____________$_________ 11. 1 CLAMP 6" SS1 7.24 X 16” FULL CIRCLE RANGE 6.84-7.24 WORDS: __________________________________$____________$_________ REDI & FULL CIRCLE CLAMPS ITEM QUANTITY ITEM DESCRIPTION UNIT COST EXTENSION NO. & UNIT 12. 2 CLAMP 6" SS2 7.64 X 10” FULL CIRCLE RANGE 6.84-7.64 WORDS: __________________________________$____________$_________ 13. 1 CLAMP 6" SS2 7.64 X 16” FULL CIRCLE RANGE 6.84-7.64 WORDS: __________________________________$____________$_________ 14. 1 CLAMP 8” SS1 9.70 X 12” FULL CIRCLE RANGE 9.30-9.70 WORDS: __________________________________$____________$_________ 15. 1 CLAMP 8” SS2 9.79 X 10” FULL CIRCLE RANGE 8.99-9.79 WORDS: __________________________________$____________$_________ 16. 6 CLAMP 6” SS1 7.46 X 10” FULL CIRCLE RANGE 7.06-7.46 WORDS: __________________________________$____________$_________ 17. 5 CLAMP 6” SS1 7.46 X 12” FULL CIRCLE RANGE 7.05-7.46 WORDS: __________________________________$____________$_________ 18. 2 CLAMP 12" SS1 13.55 X 10” FULL CIRCLE RANGE 13.15-13.55 WORDS: __________________________________$____________$_________ 19. 4 CLAMP 12” SS1 13.55 X 12” FULL CIRCLE RANGE 13.15-13.55 WORDS: __________________________________$____________$_________ 20. 1 CLAMP 12” SS1 14.50 X 16” FULL CIRCLE RANGE 14.10-14.50 WORDS: __________________________________$____________$_________ 21. 2 HYMAX COUPLING 4” 2000-0563-260(over size) RANGE 4.25-5.63 WORDS: _________________________________$____________$_________ 22. 10 HYMAX COUPLING 6” 2000-0768-260 RANGE 6.42-7.68 WORDS: _________________________________$____________$_________ REDI & FULL CIRCLE CLAMPS ITEM QUANTITY ITEM DESCRIPTION UNIT COST EXTENSION NO. & UNIT 23. 1 HYMAX COUPLING 8” 2000-0984-260 RANGE 8.54-9.84 WORDS: _________________________________$____________$_________ 24. 1 HYMAX COUPLING 12” 2000-1366-260 RANGE 12.40-13.66 WORDS: _________________________________$____________$_________ 25. 2 HYMAX COUPLING 12” 2000-1441-260 (OVER SIZE) RANGE 13.15-14.41 WORDS: _________________________________$____________$_________

Bid Protests Not Available