Past Bid Detail | BidFortune

Past Bid Detail Page

Hi,

Federal Bid

Last Updated on 31 Dec 2010 at 9 AM

Combined Synopsis/Solicitation

Location Unknown

Parts Kit, Service AO MTV

Solicitation ID SPM7L3-11-Q-0218

Source Signup to get source link

Posted Date 03 Dec 2010 at 5 PM

Archive Date 31 Dec 2010 at 5 AM

NAICS Category

Product Service Code

Set Aside No Set-Aside Used

Contracting Office Dla Land And Maritime

Agency Department Of Defense

Location United states

Karin M. Wilson

Purchasing Agent

[email protected]

Phone

6146923609

ITEM DESCRIPTION FOR PR: 0028843945

PARTS KIT, SERVICE AO MTV
SUPPLIER SHALL ENSURE THAT
ALL PARTS WILL HAVE TRACEABILITY BACK TO
AUTHORIZED SUPPLIERS SHOWN ON KIT DRAWING.
EXCEPTION TO DRAWING:WHEN
PROVIDING A GIVEN NSN,WEBFLIS APPROVED CAGE
AND P/N'S WITH RNCC-RNVC OF
2-2,3-2, AND 5-2 MAY BE USED. RNCC-RNVC
CODES 3-9 AND 5-9 MAY NOT
USED AND ARE CONSIDERED OBSOLETE.
FAT TESTING REQUIRED FOR PART
NUMBER 12418424 NSN 5310-01-454-5553.
EATON CORP 52304 IS WAIVED,ALSO
PINE AUTOMOTIVE 3B0Y2 IS WAIVED,
HUPP AEROSPACE/DEFENSE 0JT27 IS WAIVED.
NOTES: EXCEPTION TO DRAWING,
PARTS SHOWING SUPPLIER AXLE TECH MAY ALSO
BE PROCURED FROM ARVIN MERITOR
WITH PROPER TRACEABILITY.

DLAD CLAUSE 52.246-9004,PRODUCT VERIFICATION
TESTING,IS HEREBY INCORPORATED,AND MAY BE
INVOKED AT THE DISCRETION OF THE PROCUREMENT
ACTIVITY.

IF AQLS ARE LISTED IN THE SPECIFICATION(S)
OR DRAWING(S) THEY MAY BE USED TO ESTABLISH THE
AUTHORIZED SAMPLE SIZE,HOWEVER,THE ACCEPTANCE
NUMBER FOR THIS CONTRACT IS ZERO;I.E.,THIS
CONTRACT REQUIRES A SAMPLING PLAN THAT ACCEPTS
ON ZERO DEFECTS AND REJECTS ON ONE OR MORE
DEFECT(S).

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.

KIT QUALITY PROVISION
.
1. THIS REQUIREMENT APPLIES TO MATERIAL SUPPLIED
TO THE GOVERNMENT AS A KIT.
2. THE CONTRACTOR SHALL COMPLY WITH ALL
APPLICABLE QUALIFIED PRODUCTS LIST (QPL)
REQUIREMENTS FOR THE KIT COMPONENTS BEING
SUPPLIED.
3. THE CONTRACTOR SHALL INCORPORATE A SYSTEM FOR
OBTAINING, HANDLING AND SUPPLYING ORIGINAL
EQUIPMENT MANUFACTURER (OEM) CERTIFIED PARTS
INTO ALL CONTRACTUAL DOCUMENTS ENTERED INTO WITH
ITS VENDORS.
4. THE CONTRACTOR SHALL IMPLEMENT AN INSPECTION
SYSTEM, WHICH WILL INCLUDE INSPECTION OF ALL
PARTS UPON RECEIPT TO ENSURE CONFORMANCE WITH
REQUIREMENTS AND TO ENSURE THAT THEY ARE NOT
DAMAGED.
5. THE CONTRACTOR SHALL MAINTAIN A SYSTEM OR
PROCESS THAT WILL ENSURE TRACEABILITY OF ALL
PARTS, THROUGH AN UNBROKEN SUPPLY CHAIN, TO THE
MANUFACTURER.
6. THE CONTRACTOR'S INSPECTION SYSTEM AND
PROCEDURE FOR ENSURING PARTS TRACEABILITY SHALL
BE AVAILABLE FOR REVIEW BY THE GOVERNMENT AT THE
REQUEST OF THE CONTRACTING OFFICER.
7. THE CONTRACTOR SHALL FURNISH ONLY THOSE PARTS
THAT ARE KNOWN TO BE ACCEPTABLE TO THE
GOVERNMENT, I.E. SOLE SOURCE PARTS, APPROVED
SOURCE PARTS, ACCEPTABLE SOURCE PARTS, AS
REFLECTED IN THE GOVERNMENT'S CONTRACT
TECHNICAL DATA FILE (CTDF).
8. UNLESS OTHERWISE APPROVED IN ADVANCE BY THE
CONTRACTING OFFICER, THE CONTRACTOR SHALL SUPPLY
ONLY NEW AND UNUSED PARTS THAT ARE NOT
GOVERNMENT SURPLUS PARTS.

"FINAL INSPECTION AND ACCEPTANCE OF THE ITEM
SHALL BE AT THE ACTUAL MANUFACTURING FACILITY.
TECHNICAL INSPECTION IS REQUIRED. THE
CONTRACTOR SHALL MAKE DRAWINGS AND TECHNICAL
INFORMATION AVAILABLE TO VERIFY THAT THE ITEM
MEETS ALL TECHNICAL REQUIREMENTS.
COUNT, KIND, AND CONDITION INSPECTIONS ARE
NOT ACCEPTABLE. THIS NOTE TAKES PRECEDENCE OVER
MASTER SOLICITATION PART ONE PROVISIONS, NOTE 6,
QUOTATIONS BY NON-MANUFACTURERS (APR 1984,
DCSC 52.217-9C01). FINAL INSPECTION OF
PACKAGING, IF REQUIRED, MAY BE CONDUCTED
ELSEWHERE."

FULL AND OPEN COMPETITION APPLY
I/A/W QAP 14153 QAP-EQ001
REFNO
AMEND NR B DTD 02/13/96
TYPE NUMBER

I/A/W QAP 14153 QAP-EQ002
REFNO
AMEND NR A DTD 03/10/03
TYPE NUMBER

I/A/W DRAWING NR 19207 12418424
REFNO
AMEND NR B DTD 03/23/06
TYPE NUMBER

I/A/W DRAWING NR 19207 57K4845
BASIC
AMEND NR A DTD 09/19/05
TYPE NUMBER 57K4845-005

PRLI 0001 63 KT 63

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
QUP = 001: PRES MTHD = ZZ: CLNG/DRY = X: PRESV MAT = XX:
WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:
UNIT CONT = XX: OPI = O:
INTRMDTE CONT = XX: INTRMDTE CONT QTY = XXX:
PACK CODE = U:
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE: 00 - 00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B
DATED 08183
SUPPLEMENTAL INSTRUCTIONS
.

For all shipments of packaged materiel to the government,
which includes either Depot (DLA-Direct) or DVD (Customer-
Direct) shipments, both DoD linear and two-dimensional (2D)
bar code markings are required on Military Shipping Labels
in accordance with MIL-STD-129, Revision P, dated December
15, 2002 (but see DLAD 52.211-9010(D) for exceptions to the
requirement for MSL and 2D symbols). See the DLA packaging
web site identified in DLAD 52.211-9010(E) for change
notices to MIL-STD-129P that apply. 2D bar coding shall be
in accordance with ISO/IEC 15438, ISO/IEC 15434 (ANSI MH10.8.3)
and DoD 4500.9-R. MSL linear (code 3 of 9 or code 39) bar
coding shall be in accordance with ISO/IEC 16388. Shipping
label stock quality shall meet MIL-PRF-61002. Bar code print
quality shall meet ANSI MH10.8-2000 or ANSI X3.182-1990 (R2000)
for applicable 2D and/or linear bar codes. All DVD shipments
shall meet additional linear bar coding requirements in DLAD
52.211-9010(C). Except for the Transportation Control Number
(TCN), which must always be present on the Military Shipping
Label, when the contract/order omits any other data elements as
defined in MIL-STD-129P and if the information is not available
from the Administrative Contracting Office, then the field is
not required as part of the Military Shipping Label and may be
left blank. If there are inconsistencies between the schedule
and MIL-STD-129P, the schedule takes precedence.