The objective of this sources sought is to find potential new sources for the Vehicular Modification Kit National Stock Number (NSN) 4910-01-618-4540. The potential new sources would need to provide a Source Approval Request (SAR) package to become an approved source. Following are the items required in the kit:

KIT CONTAINS THE FOLLOWING ITEMS: TOP CHEST; 2 BANK ROLL CAB WITH 11 DRAWERS; 9600MOD KIT, TOOL CONTROL FOAM, 19 PCS; EXTRACTOR SET, 20PCS; DRILL BIT, 35PCS; DRILL GUIDE 10PCS; EXTRACTOR SET 5PCS; MASTER RETHREADING KIT; RETHREADING DIE 24PCS; RETHREADING TAP 22PCS; SET TAP AND DIE KIT; TAPS 34PCS; DIE 33PCS; DIE SOCKET 1PCS; TAP WRENCH 4PCS; SCREWDRIVER DIE ADJUSTING 1PCS; THREAD PITCH GAUGE METRIC 1PCS; TAP AND DIE SET,1; THREAD PITCH GAUGE STANDARD 1PCS; TABLE CUTTING SET,1; YOKE ASSEMBLY 1PCS; BAR ASSEMBLY 1PCS; ADAPTORS 9PCS; TABLE CUTTER 1PCS; METRIC WRENCH OPEN END 10PCS; EXTENSION 33PCS; BOX WRENCH 15PCS; DOUBLE END FLARE NUT WRENCH 16PCS; OPEN END WRENCH 11PCS; CROW FOOT WRENCH 7PCS; COMBINATION WRENCH 49PCS; RATCHETING BOX WRENCH 5PCS; METRIC COMBINATION WRENCH 39PCS; PLIERS 20PCS; LOCKING PLIERS 3PCS; WIRE STRIPPERS 2PCS; SCRATCH BRUSH 1PCS; TOOTH BRUSH 1PCS; L SHAPED WRENCH SET,1;HEX KEY 26PCS; METRIC SET L SHAPE HEX,1; CLEANER 1PCS.

KIT ALSO CONTAINS THE FOLLOWING ITEMS: BRUSH TERMINAL 1PCS; CARBON SCRAPER 2PCS; FLASHLIGHT 1PCS; RETAINING RING PLIERS 6PCS; TIP KIT 1PCS; PICK 7PCS; TUBING CUTTER 1PCS; UTILITY KNIFE 1PCS; BATTERY TERMINAL WRENCH 1PCS; BREAKER BAR 3PCS; RATCHET 10PCS; WIRE GAP GAUGE 1PCS; FEELER GAUGE 2PCS; GAPPER GAGUE 1PCS; SOCKET 295PCS; UNIVERSAL JOINT 11PCS; ROUND MIRROR 1PCS; SCRAPPER 1PCS; SPARK PLUG SOCKET 4PCS; DRIVER 1PCS; SOCKET DRIVER 31PCS; ; TAPE MEASURE1PCS; IMPACT FLANK DRIVE 12PCS; TORQUE WRENCH 2PCS; FILES 10PCS; OFFSET SCREWDRIVER 3PCS; MINIATURE SCREWDRIVER SET,1; NUT DRIVER 7PCS; PICK UP TOOL 1PCS; SCREWDRIVER BIT KIT,1; BITS 34PCS; SCREWDRIVER 27PCS; SCREW STARTER 1PCS; ADJUSTABLE WRENCH 4PCS; PRY BAR 8PCS; CIRCUIT TESTER 1PCS; HACKSAW 1PCS; PUNCH 26PCS; CHISEL GAUGE 1PCS; CHISEL 5PCS; HAMMER 9PCS; HIGH SPEED DRILL BIT SET,1; AIR RATCHET 2PCS; EAR PROTECTOR 1PCS; GOGGLES 1PCS; BLOW GUN 1PCS; IMPACT WRENCH 2PCS; AIR DRILL 1PCS.

 All items need to be organized and secured in its own assigned location inside a tool box for easy access and transportation.