EQUIPMENT STAND FOR MIXER/SLICER PER THE SPECIFICATIONS LISTED BELOW: - MIXER TABLE - MOBILE - 30"W X 30"D X 28H" - 14/304 STAINLESS STEEL TOP - TOP IS FURNISHED WITH A 2"X1" SQUARE DIE EMBOSSED NO-DRIP COUNTERTOP OFFSET EDGE WITH A 1/2" RETURN ON 4 SIDES - CROSS BRACING WELDED TO FRONT LEGS ALUMINUM DIE CAST "LEG TO SHELF" CLAMP - STAINLESS STEEL BASE - ADJUSTABLE UNDERSHELF - STAINLESS STEEL HANDLE AND TWO RUBBER BUMPERS SECURED TO TABLE TOP - ALUMINUM PAN RACK WITH 2" SPACING - PAN RACK ACCOMMODATES (6) 18"X 26" PANS - (4) 5" SWIVEL CASTERS (2) BRAKED), NSF - WEIGHT: 85 LBS MFR:________________ MODEL:______________ ADVANCE TABCO MODEL NUMBER: MT-MS-300 OR EQUAL ***NOTE: AWARDED VENDOR MUST COORDINATE DELIVERY WITH KATHRYN FULLER AT (256) 329-3311. INSIDE DELIVERY AS FOLLOWS: ATTN: KATHRYN FULLER BILL NICHOLS STATE VETERANS HOME 1784 ELKAHATCHEE ROAD ALEXANDER CITY, AL 35010 EQUIPMENT STAND FOR MIXER/SLICER PER THE SPECIFICATIONS LISTED BELOW: - MIXER TABLE, MOBILE, 30"W X 30"D X 28H" - 14/304 STAINLESS STEEL TOP AND STAINLESS STEEL BASE - TOP IS FURNISHED WITH A 2"X1" SQUARE DIE EMBOSSED NO-DRIP COUNTERTOP OFFSET EDGE WITH A 1/2" RETURN ON 4 SIDES - CROSS BRACING WELDED TO FRONT LEGS ALUMINUM DIE CAST "LEG TO SHELF" CLAMP - STAINLESS STEEL BASE - ADJUSTABLE UNDERSHELF - STAINLESS STEEL HANDLE AND TWO RUBBER BUMPERS SECURED TO TABLE TOP - ALUMINUM PAN RACK WITH 2" SPACING - PAN RACK ACCOMMODATES (6) 18"X 26" PANS - (4) 5" SWIVEL CASTERS (2) BRAKED), NSF - WEIGHT: 85 LBS MFR:________________ MODEL:______________ ADVANCE TABCO MODEL NUMBER: MT-MS-300 OR EQUAL ***NOTE: AWARDED VENDOR MUST COORDINATE DELIVERY WITH CHARLOTTE EASON AT (256) 851-2807. INSIDE DELIVERY AS FOLLOWS: ATTN: CHARLOTTE EASON FLOYD E. "TUT" FANN STATE VETERANS HOME 2701 MERIDIAN STREET HUNTSVILLE, AL 35811 FOOD PROCESSOR -PER THE FOLLOWING SPECIFICATIONS: - INDUCTION DIRECT DRIVE 3 HP MOTOR, 1 PHASE - 120V, 300-3500 RPM PULSE FUNCTION, VARIABLE SPEED, AND ON/OFF SWITCH - 4 SPEEDS - 7 LITER CAPACITY STAINLESS STEEL BOWL WITH VEGETABLE PREP ATTACHMENT WITH SIDE EJECTION EQUIPPED WITH 2 HOPPERS: 1 LARGE AND 1 CYLINDRICAL HOPPER, A 1/8" SLICING DISC, A 1/8" GRATING DISC, AND BUILT IN TUNNEL - TIGHT SEALING LID WITH FRONT- LATCHING LOCKING DEVICE - CETLUS - MEETS ETL SANITATION - NEMA 5-20P - 1 YEAR PARTS AND LABOR WARRANTY MFR:________________ MODEL:______________ ROBOT COUPE MODEL R602VV SERIES E OR EQUAL ** NOTE: AWARDED VENDOR MUST COORDINATE DELIVERY WITH CHARLOTTE EASON AT (256) 851-2807. INSIDE DELIVERY AS FOLLOWS: ATTN: CHARLOTTE EASON 2701 MERIDIAN STREET HUNTSVILLE, AL 35811 CAMSHELVING PREMIUM SERIES MOBILE DRYING UNIT PER THE SPECIFICATIONS LISTED BELOW: - MOBILE DRYING UNIT 24"X36"X75" - INCLUDES: (5) DOME CRADLES, (2) FACTORY ASSEMBLED POST KITS, (10) DOME CRADLES, (4) PREMIUM SWIVEL TOTAL LOCKING CASTERS, SPECKLED GRAY - LIFETIME WARRANTY AGAINST RUST AND CORROSION MFR:________________ MODEL:______________ CAMBRO MODEL NUMBER: CPMU243675DDPKG OR EQUAL ** NOTE: AWARDED VENDOR MUST COORDINATE DELIVERY WITH KATHY VOLL AT (251) 937-8049. INSIDE DELIVERY AS FOLLOWS: ATTN: KATHY VOLL 300 FAULKNER DRIVE BAY MINETTE, AL 36507 CAMSHELVING ANGLED DRYING & STORAGE CRADLE PER THE FOLLOWING SPECIFICATIONS: - 1 PACK OF 4 EACH - 23-5/16"WX10-1/5"LX6-5/16"H, 8 SLOT, SOFT GRAY, HIGH IMPACT ABS, NSF MFR:________________ MODEL:______________ CAMBRO MODEL NO. CSDR84151 OR EQUAL ** NOTE: AWARDED VENDOR MUST COORDINATE DELIVERY WITH KATHY VOLL AT (251) 937-8049. INSIDE DELIVERY AS FOLLOWS: ATTN: KATHY VOLL 300 FAULKNER DRIVE BAY MINETTE, AL 36507

Bid Protests Not Available