This is a sources sought notice for the following material, not an RFQ.  To the best of the Government's knowledge, EB is the proprietary source of these specifc specifications, making this required restricted to EB and authorized distributors of EB.  Vendors that can provide this material or who have evidence suggesting a different OEM of specifications are encouraged to contact Rachel McCluskey at [email protected] with the following information:

1.  Company Name

2. POC Information

3. Business Size

4. Manufacturer Size

5.  Cage Code

6. Statement explaining capabilities

MATERIAL:

ITEM 0001: Plug Assembly, outboard, molded 90 degree (anode), EB P/N 19-87-3222. Manufactured IAW
NAVSEA dwg 302-5792287A, assy 502 as modified by NAVSEA dwg 415-7285181A assy 502 Mod 1 and Modification
Note 21 (eliminates the leak detector & extension wiring pc’s 19, 20, and 23 of dwg 5792287A). Observe applicable
general notes of drawings. Mold with 50 ft of type LSSHOF-3 cable (cable type is changed by Modification Note 10 of
drawing 7285181A) per leg and leave other end unterminated. Mold IAW NAVSEA MOLDING MANUAL S9320-AMPRO-
020. The requirement for non-conductive coating (NCC) has been eliminated per note on DWG 5792287A Section
B-B. Offeror must furnish, with offer, evidence of having satisfactorily conducted first article testing for M24231
connectors previously acquired or tested by the government (see section 6.3 of MIL-DTL-24231), Offerors must also be
listed on the NAVSEA S9320-AM-PRO-020 approved vendor list (see attachment). Offeror may utilize a vendor who can
provide, with offer, evidence of a satisfactorily conducted first article test for M24231 connectors, that vendor must
-020 approved vendor list. Inspect and test cable assembly IAW MILDTL-
24231E (SH) dtd 26APRIL2013 table 1 quality conformance type 1 for molded plugs.

ITEM 0002: Plug Assembly, outboard, molded 90 degree (anode), EB P/N 19-87-3222. Manufactured IAW
NAVSEA dwg 302-5792287A, assy 502 as modified by NAVSEA dwg 415-7285181A assy 502 Mod 1 and Modification
Note 21 (eliminates the leak detector & extension wiring pc’s 19, 20, and 23 of dwg 5792287A). Observe applicable
general notes of drawings. Mold with 50 ft of type LSSHOF-3 cable (cable type is changed by Modification Note 10 of
drawing 7285181A) per leg and leave other end unterminated. Mold IAW NAVSEA MOLDING MANUAL S9320-AMPRO-
020. The requirement for non-conductive coating (NCC) has been eliminated per note on DWG 5792287A Section
B-B. Offeror must furnish, with offer, evidence of having satisfactorily conducted first article testing for M24231
connectors previously acquired or tested by the government (see section 6.3 of MIL-DTL-24231), Offerors must also be
listed on the NAVSEA S9320-AM-PRO-020 approved vendor list (see attachment). Offeror may utilize a vendor who
can provide, with offer, evidence of a satisfactorily conducted first article test for M24231 connectors, that vendor must
also be listed on the NAVSEA S9320-AM-PRO-020 approved vendor list. Inspect and test cable assembly IAW MILDTL-
24231E (SH) dtd 26APRIL2013 table 1 quality conformance type 1 for molded plugs.

ITEM 0003: Cable Assembly (3 Cable type) 90 degree, EB P/N 19-87-7053 or equivalent. Salient characteristics:
EB 4211/16 SPEC SHT (EB4211/16-100). Cable Assembly for EHF end of reference cells. Manufacture IAW EB SPEC
4211 rev D, P/N EB4211/16-100. Cable Assembly consists of MIL-DTL-24231/2-001 connector body (NCC coated) with
a three pin insert wired and molded to three 65 foot lengths of type LSSHOF-3 cable. Leave other end of cable
unterminated. Plug body must be treated with nonconductive coating (NCC) plasma spray per NAVSEA S9320-AMPRO-
030 using an approved vendor (see attached list). Teledyne D. G. O'Brien’s DGO-1 cathodic delamination resistant
coating is also authorized as an alternative to plasma spray. Offeror must furnish, with offer, evidence of having
satisfactorily conducted first article testing for M24231 connectors previously acquired or tested by the government (see
section 6.3 of MIL-DTL-24231), Offerors must also be listed on the NAVSEA S9320-AM-PRO-020 approved vendor list
(see attachment). Offeror may utilize a vendor who can provide, with offer, evidence of a satisfactorily conducted first
article test for M24231 connectors, that vendor must also be listed on the NAVSEA S9320-AM-PRO-020 approved
vendor list. Inspect and test cable assembly IAW MIL-DTL-24231E (SH) dtd 26APRIL2013 table 1 quality conformance
type 1 for molded plugs. DI-NDTI-80809B applies.

ITEM 0004: Cable Assembly (3 Cable type) 90 degree, EB P/N 19-87-7053 or equivalent. Salient characteristics:
EB 4211/16 SPEC SHT (EB4211/16-100). Cable Assembly for EHF end of reference cells. Manufacture IAW EB SPEC
4211 rev D, P/N EB4211/16-100. Cable Assembly consists of MIL-DTL-24231/2-001 connector body (NCC coated) with
a three pin insert wired and molded to three 65 foot lengths of type LSSHOF-3 cable. Leave other end of cable
unterminated. Plug body must be treated with nonconductive coating (NCC) plasma spray per NAVSEA S9320-AMPRO-
030 using an approved vendor (see attached list). Teledyne D. G. O'Brien’s DGO-1 cathodic delamination resistant
coating is also authorized as an alternative to plasma spray. Offeror must furnish, with offer, evidence of having
satisfactorily conducted first article testing for M24231 connectors previously acquired or tested by the government (see
section 6.3 of MIL-DTL-24231), Offerors must also be listed on the NAVSEA S9320-AM-PRO-020 approved vendor list
(see attachment). Offeror may utilize a vendor who can provide, with offer, evidence of a satisfactorily conducted first
article test for M24231 connectors, that vendor must also be listed on the NAVSEA S9320-AM-PRO-020 approved
vendor list. Inspect and test cable assembly IAW MIL-DTL-24231E (SH) dtd 26APRIL2013 table 1 quality conformance
type 1 for molded plugs. DI-NDTI-80809B applies.

ITEM 0005: Plug Assembly, outboard, molded, straight (anode); EB P/N: 19-87-3223; Manufactured IAW NAVSEA
dwg 302-5792287A Assy 502 as modified by NAVSEA dwg 415-7285181A Assy 502 Mod 2 and modification note 21
(eliminates the leakdetector & extension wiring pc's 19, 20, and 23 of dwg 5792287A); observe applicable general notes
of dwgs. Mold with 50 foot of type LSSHOF-3 cable (cable type is changed by modification note 10 of dwg 7285181A)
per leg and leave other end unterminated. Mold IAW NAVSEA molding manual S9320-AM-PRO-020. The requirement
for non-conductive coating (NCC) has been eliminated per note on dwg 5792287A section b-b. Offeror must furnish,
w/offer, evidence of having satisfactorily conducted first article test for M24231 connectors, previously acquired or tested
by the government(see section 6.3 of MIL-DTL-24231). Offerors must also be listed on the NAVSEA S9320-AM-PRO-
020 approved vendor list; offeror may utilize a vendor who can provide, w/offer, evidence of a satisfactorily conducted
first article test for M24231 connectors, that vendor must also be listed on the NAVSEA S9320-AM-PRO-020 approved
vendor list; inspect and test cable assy IAW MIL-DTL-24231E(sh) dtd 26April2013 table 1 Quality Conformance Type 1
for molded plugs; D-NDTI-80809B applies.

ITEM 0006: Cable Assembly (4 cable type) 90 degree, EB P/N 19-87-7054 or equivalent; salient characteristics: EB
4211/16 spec sht (EB4211/16-200) cable assy for EHF end of ref cells; Manufactured IAW EB Spec 4211 Rev-D, P/N
EB4211/16-200; cable assy consists of MIL-DTL-24231/2-002 connector body (NCC coated) w/a 4 pin insert wired and
molded to four 65 foot lengths of type LSSHOF-3 cable. Leave other end of cable unterminated. Plug body must be treated
with non conductive coating (NCC) plasma spray per NAVSEA S9320-AM-PRO-030 using approved vendor; offeror
must furnish, with offer, evidence of having satisfactorily conducted first article testing for M24231 connectors previously
acquired or tested by the government( see section 6.3 of MIL-DTL-24231); offerors must also be listed on NAVSEA
S9320-AM-PRO-020 approved vendor list (attached); offeror may utilize a vendor who can provide, w/offer, evidence of a
satisfactorily conducted first article test for M24231 connectors, that vendor must also be listed on NAVSEA S9320-AMPRO-
020 approved vendor list; inspect and test cable assy IAW MIL-DTL-24231E(sh) dtd 26April 2013 table 1 Quality
Conformance Type 1for molded plugs; DI-NDTI-80809B applies.

ITEM 0007: Cable Assembly (4 cable type) 90 degree, EB P/N 19-87-7054 or equivalent; salient characteristics: EB
4211/16 spec sht (EB4211/16-200) cable assy for EHF end of ref cells; Manufactured IAW EB Spec 4211 Rev-D, P/N
EB4211/16-200; cable assy consists of MIL-DTL-24231/2-002 connector body (NCC coated) w/a 4 pin insert wired and
molded to four 65 foot lengths of type LSSHOF-3 cable. Leave other end of cable unterminated. Plug body must be treated
with non conductive coating (NCC) plasma spray per NAVSEA S9320-AM-PRO-030 using approved vendor; offeror
must furnish, with offer, evidence of having satisfactorily conducted first article testing for M24231 connectors previously
acquired or tested by the government( see section 6.3 of MIL-DTL-24231); offerors must also be listed on NAVSEA
S9320-AM-PRO-020 approved vendor list (attached); offeror may utilize a vendor who can provide, w/offer, evidence of a
satisfactorily conducted first article test for M24231 connectors, that vendor must also be listed on NAVSEA S9320-AMPRO-
020 approved vendor list; inspect and test cable assy IAW MIL-DTL-24231E(sh) dtd 26April 2013 table 1 Quality
Conformance Type 1for molded plugs; DI-NDTI-80809B applies.

ITEM 0008: 90 degree anode plug assy outboard molded, EB PN 19-87-3222MOD; detailed 15-9-2A dwg 8357287,
dwg 5792287 Assy 502, MOD 3; dwg H535-0510 modifies dwg 5792287, see dwg H535-0510A1 for MOD 3 (TVD to
H535-0510), molded with 108 inches LSSHOF-23. Mold IAW NAVSEA MOLDING MANUAL S9320-AM-PRO-020.
The requirement for non-conductive coating (NCC) has been eliminated per note on DWG 5792287A Section B-B.
Offeror must furnish, with offer, evidence of having satisfactorily conducted first article testing for M24231 connectors
previously acquired or tested by the government (see section 6.3 of MIL-DTL-24231), Offerors must also be listed on the
NAVSEA S9320-AM-PRO-020 approved vendor list (see attachment). Offeror may utilize a vendor who can provide,
with offer, evidence of a satisfactorily conducted first article test for M24231 connectors, that vendor must also be listed
on the NAVSEA S9320-AM-PRO-020 approved vendor list. Inspect and test cable assembly IAW MIL-DTL-24231E
(SH) dtd 26APRIL2013 table 1 quality conformance type 1 for molded plugs.

ITEM 0009: Plug Assembly, 3 cable, ref cell outboard; EB PN 19-87-7053SALT, EB4211/16-100A
Made with 100 feet of LSSHOF-23, see detail 15-10-2C. FAT certification required. Leave other end of cable
unterminated. Plug body must be treated with nonconductive coating (NCC) plasma spray per NAVSEA S9320-AMPRO-
030 using an approved vendor (see attached list). Teledyne D. G. O'Brien’s DGO-1 cathodic delamination resistant
coating is also authorized as an alternative to plasma spray. Offeror must furnish, with offer, evidence of having
satisfactorily conducted first article testing for M24231 connectors previously acquired or tested by the government (see
section 6.3 of MIL-DTL-24231), Offerors must also be listed on the NAVSEA S9320-AM-PRO-020 approved vendor list
(see attachment). Offeror may utilize a vendor who can provide, with offer, evidence of a satisfactorily conducted first
article test for M24231 connectors, that vendor must also be listed on the NAVSEA S9320-AM-PRO-020 approved
vendor list. Inspect and test cable assembly IAW MIL-DTL-24231E (SH) dtd 26APRIL2013 table 1 quality conformance
type 1 for molded plugs. DI-NDTI-80809B applies.

ITEM 0010: Plug Assembly, 3 cable, ref cell outboard; EB PN 19-87-7053SALT, EB4211/16-100A
Made with 100 feet of LSSHOF-23, see detail 15-10-2A. FAT certification required. Leave other end of cable
unterminated. Plug body must be treated with nonconductive coating (NCC) plasma spray per NAVSEA S9320-AMPRO-
030 using an approved vendor (see attached list). Teledyne D. G. O'Brien’s DGO-1 cathodic delamination resistant
coating is also authorized as an alternative to plasma spray. Offeror must furnish, with offer, evidence of having
satisfactorily conducted first article testing for M24231 connectors previously acquired or tested by the government (see
section 6.3 of MIL-DTL-24231), Offerors must also be listed on the NAVSEA S9320-AM-PRO-020 approved vendor list
(see attachment). Offeror may utilize a vendor who can provide, with offer, evidence of a satisfactorily conducted first
article test for M24231 connectors, that vendor must also be listed on the NAVSEA S9320-AM-PRO-020 approved
vendor list. Inspect and test cable assembly IAW MIL-DTL-24231E (SH) dtd 26APRIL2013 table 1 quality conformance
type 1 for molded plugs. DI-NDTI-80809B applies.