THIS IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. This is a notice of intent to award a purchase order on a sole source basis to Heckler and Koch Defense Inc, 19980 Highland Vista Drive, Suite 190, Ashburn, VA 20147 to purchase the following repair parts. The justification is Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements. This procurement is for the purchase the following repair parts:

50ea 217231 extractor, UMP40
90ea 217538 magazine release axle
75ea 217555 firing pin, complete, UMP/USC (drawing #94191-230)
75ea 217587 firing pin retaining pin, UMP/USC
75ea 219342 finger protection, UMP
75ea 219343 adapter piece, UMP
75ea 219414 misc. product
75ea 928747 clamping sleeve, SL8, 4x14
400ea 207188 recoil spring guide rod, P2000
400ea 209312 hammer strut, P2000
200ea 207331 trigger bar, P2000
50ea 209263 trigger, P2000
50ea 209265 cocking piece, P2000
900ea 209267 slide release lever, P2000
800ea 209268 slide release lever (R) P2000
50ea 209271 disconnector, P2000
50ea 209272 axle, P2000 (drawing 93201-110.18)
75ea 209273 catch, incomplete, P2000
75ea 209274 control latch, P2000
1500ea 209294 rubber plug extractor, P2000 (drawing 93201-130.04)
800ea 209295 firing pin, P2000 (drawing 93201-130.05)
350ea 209313 firing pin block (drop safety) (drawing 93201-130.08)
80ea 209320 catch, complete, P2000
100ea 209321 hammer, P2000
50ea 218314 extractor, P2000 (drawing 93203-130.02)
200ea 218315 extractor spring, P2000 (drawing 93203-130.03)
75ea 702400 tritium sight, P2000, 5.9mm
50ea 207119 recoil spring guide rod, complete, P2000SK
450ea 207121 rod (hammer strut), P2000
100ea 207122 hammer spring, P2000SK
3500ea 985014 clamping sleeve, P2000
400ea 214101 axle, sear, USP (all)
100ea 214154 axle, trigger, USP9/40/45
1500ea 214167 spring, flat, USP(sear/catch) replaces 214156
600ea 215929 spring, helical, magazine release
900ea 219441 spring, trigger, 8.5lbs
95ea 702403 sight, tritium, P2000, 6.7mm
200ea 214818 magazine release, USP compact
1000ea 215822 spring, firing pin, HK45C

This notice of intent is not a request for competitive proposals, however, all capability statements received within 5 days after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete this proposed action based on responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.

Contracting Office address:
DHS ICE office of Acquisition Management
7701 N. Stemmons Freeway, Suite 300
Dallas, TX 75247

Place of Performance:
DHS ICE
National Firearms and Tactical Training Unit
320 E. Chestnut Avenue
Altoona, PA 16601

Point of Contact:
Greg Horwitz - Contract Specialist
[email protected]

 

Bid Protests Not Available