Federal Bid

Last Updated on 11 Apr 2018 at 4 PM
Sources Sought
Memphis Tennessee

Goulds 3196 MTi 3x4-8G

Solicitation ID W912EQ18S0006
Posted Date 11 Apr 2018 at 4 PM
Archive Date Not Specified
NAICS Category
Product Service Code
Set Aside No Set-Aside Used
Contracting Office W07v Endist Memphis
Agency Department Of Defense
Location Memphis Tennessee United states 38103

THIS IS NOT A SOLICITATION, REQUEST FOR QUOTE (RFQ) OR A REQUEST FOR PROPOSAL (RFP). THIS REQUEST FOR INFORMATION IS FOR ACQUISITION PLANNING PURPOSES ONLY AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT TO ISSUE A SOLICITATION OR ULTIMATELY AWARD A CONTRACT. ANY COST INCURRED AS A RESULT OF THE ANNOUNCEMENT SHALL BE BORNE BY THE INTERESTED PARTY (PROSPECTIVE OFFEROR) AND WILL NOT BE CHARGED TO THE GOVERNMENT FOR REIMBURSEMENT. RESPONDENTS WILL NOT BE NOTIFIED OF THE RESULTS OF ANY GOVERNMENT ASSESSMENTS.

PURPOSE:
The U.S. Army Corps of Engineers, Memphis District is conducting this Sources Sought in support of Market Research to notify and seek potential qualified members of industry to gain knowledge of interest, capabilities, qualification, to include the Small Business Community providing fire or water pumps consisting of the "Goulds 3196 MTi 3x4-8G" brand name or equal products in the quantity. Responses to this Sources Sought Synopsis will be used by the government in making appropriate acquisition decisions. The type of solicitation to issue will depend upon the responses to this sources sought synopsis. The Government must ensure there is adequate competition among the potential pool of responsive contractors. The type of set-aside decision to be issued will depend upon the responses to this sources sought.

NO SOLICITATION IS CURRENTLY AVAILABLE.

SCOPE:
This Market Research/Sources Sought Notice is for information on capability and availability of potential contractors to provide Goulds 3196 MTi Water Pump or an equivalent product at Ensley Engineer Yard located in Memphis, TN for the USACE Memphis District.

GENERAL INFORMATION:
The proposed project will be a Firm Fixed Price contract.

North American Industrial Classification System (NAICS) Code applicable to this acquisition is 333914, Measuring, Dispensing, and Other Pumping Equipment Manufacturing.

Small Business Size Standard in number of employees for this acquisition is 750.

Interested parties must be registered in the System For Award Management (SAM), www.sam.gov.

PROJECT DESCRIPTION:
Pump Specification
SUCT.FLANGE SIZE 4'' DRILLING ANSI 150# FACING FF FINISH SERRATED
DISCH.FLANGE SIZE 3'' DRILLING ANSI 150# FACING FF FINISH SERRATED
PUMP ROTATION ( LOOKING AT PUMP FROM MOTOR ) CW
TYPE OF LUBRICATION FLOOD OIL COOLED NO
TYPE OF STUFFING BOX TAPER BORE PLUS WITH AXIAL RIBS COOLED NO
TYPE OF SEALING MECHANICAL SEAL

Weights and Measurements
PUMP 240.0 lb
MOTOR 8.2 lb
BASEPLATE lb
TOTAL 248.2 lb
GR.VOLUME w/BOX 12.9 ft³
GR.WEIGHT w/BOX 331.2 lb
Motor Specification
MOTOR BY MOUNT BY MFG.
FRAME 324TS POWER 40.0hp RPM 3600
PHASE FREQUENCY 60 HZ VOLTS
INSULATION S.F. 1.15
ENCLOSURE: TEFC PREMIUM EFFICIENCY

Auxiliary Specification
COUPLING BY CUSTOMER CPLG TYPE: REXNORD OMEGA REX ELASTOMER-ES-5 (STANDARD ORANGE)
CPL GUARD BY: CPLG GUARD MATL
BASEPLATE
MECH.SEAL: JOHN CRANE 5610VQXF (55)1X0(58)H (CARBON VS SILICON CARBIDE WITH VITON)

FOR PUMP TAPPED OPENINGS REFER TO DWG.: T63BS17-03-30 01 / River Water Pump


REQUESTED INFORMATION:
Pursuant to FAR 52.211-6 "Brand Name or Equal", respondents interested in providing a response to this Sources Sought should submit information which clearly describes the following: (In A through D).

A. Offerors' name, address, points of contact with telephone numbers and e-mail addresses.
B. DUNS number and CAGE code.
C. Business size/classification to include any designations as Small Business, HUBZone, Service Disabled Veteran Owned, or 8(a) shall be indicated on first page of submission.
D. Statement of Product Description, stating the potential product meets salient physical, functional, or performance characteristics of the specified product. Respondent Interested in providing a response must clearly identify item by either brand name, if any; and make or model number. Include a statement detailing any special qualifications and certifications, applicable to the scope of this project, held by your firm and/or in-house personnel.

RESPONSES:
Receipt of potential offerors responses shall be no later than 10:00AM CST on April 16, 2018. Responses to this sources sought may be sent via email to [email protected].

DO NOT SUBMIT PROPRIETARY AND/OR BUSINESS CONFIDENTIAL DATA. EMAIL IS THE PREFERRED METHOD WHEN RECEIVING RESPONSES TO THIS SOURCES SOUGHT.

NOTE: IF YOU DO NOT INTEND TO SUBMIT A BID ON THIS PROJECT WHEN IT IS FORMALLY ADVERTISED, PLEASE DO NOT SUBMIT A RESPONSE TO THIS SOURCES SOUGHT.

 

Bid Protests Not Available

Similar Past Bids

Location Unknown 30 Jul 2019 at 12 AM
Location Unknown 30 Jul 2019 at 5 PM
Wilmington North carolina 14 Nov 2012 at 3 PM
Location Unknown 23 Feb 2012 at 6 PM
South carolina Not Specified

Similar Opportunities

Florida 21 Oct 2025 at 5 PM
Pennsylvania 26 Jul 2025 at 4 AM (estimated)
Pennsylvania 26 Jul 2025 at 4 AM (estimated)
Wisconsin 16 Jul 2025 at 3 PM
California 29 Jul 2025 at 9 PM