Point Of Contact Not Available

IFCB Posted : Dec 1, 2023 Bid Deadline : Friday, Dec 29, 2023 Questions Due By : Thursday, Dec 7, 2023 Applicant Address : Gilmer, TX 75644 IFCB ID : 240006723 IFCB Requirements : · Before the listed deadlines, all Questions and Bids must be submitted using the on-line IFCB system. Bids submitted before the bid deadline outside of this system will be disqualified. If for some reason the system is down before the respective deadline, please email your bid to [email protected] or fax it to 918.445.0049. Bids or questions submitted in this fashion will be disqualified if the on-line system is active at the time of submission. · For all requested services and/or products listed on this IFCB: proposals that include generic/encyclopedic price lists will be considered non-responsive and will be disqualified. · Bidder must agree to participate in USF Program (AKA “E-rate”) for the corresponding funding year. · Please include the correct Service Provider Identification Number (SPIN) on your bid. · By submitting a bid, bidder certifies that the bidder does have a valid (non-red light status) SPIN for the E-rate program at the time of submission. Should the Applicant discover that the bidder is on red light status, or if the FCC classifies the bidder as on red-light status before work is performed and invoices are paid, the contract will be null and void and the applicant will have no payment obligations to the bidder. · Bidder is expected to provide the lowest corresponding price per E-rate rules. See https://www.usac.org/e-rate/service-providers/step-2-responding-to-bids/lowest-corresponding-price/ for details. · Contracts must not prohibit SPIN changes. · Bidder must agree to provide the Applicant the choice of discount methods (SPI or BEAR). · Bidder will be automatically disqualified if the District determines that the bidding company has offered any employee of the District any individual gift of more than $20 or gifts totaling more than $50 within a 12 month period. This does not apply to the recent FCC exemptions of the Gift Rule for the COVID pandemic. · All contracts awarded will be contingent upon E-rate funding and final board approval. The applicant may choose to do all or part of the project upon funding notification. · All contracts awarded under this IFCB bidding process may be voluntarily renewed by the applicant, upon written notice to the provider, for five consecutive one year terms. Please include this language in your final contract. · All applicable fees, surcharges, and taxes must be identified on the bid. E-rate rules require the applicants to evaluate the price of eligible goods and services that will be listed on the 471 application during the competitive bidding process. Fees and surcharges that apply but are not listed on the bid will be the responsibility of the bidding company, should their bid be awarded. · If there is a request for Internal Connections (Category Two) equipment, or Category One equipment listed on this IFCB the applicant will accept bids for functionally equivalent equipment. · The winning vendor will be required to complete the USAC approved Item 21 template for the project within 7 working days after notification that the vendor has won the bid. · LEASED WIDE AREA NETWORK CIRCUITS DISQUALIFICATION FACTOR: Any and all installation charges must be identified on your bid. If you submit a bid indicating that installation charges may apply without listing those charges, we will consider your bid incomplete and disqualify your bid. · LEASED WIDE AREA NETWORK CIRCUITS DISQUALIFICATION FACTOR: Bids submitted for services to incorrect addresses will be disqualified. · SELF PROVISIONED NETWORK DISQUALIFICATION FACTOR: Bids submitted for services to incorrect addresses will be disqualified. · DISQUALIFICATION FACTOR C1 NETWORK EQUIPMENT: Service providers are required to bid the entire hardware project. Bids for individual components of the project will be disqualified. · DISQUALIFICATION FACTOR C1 NETWORK EQUIPMENT: Vendors must complete and include the C1 Cover Page with their bid. Bids received without the cover page will be disqualified. · DISQUALIFICATION FACTOR C1 NETWORK EQUIPMENT: The applicant will not accept bids from manufacturers of equipment deemed a national security threat by the Federal Communications Commission. The list of prohibited equipment is available here: https://www.fcc.gov/supplychain/coveredlist. Vendors that submit bids that include these manufacturers will have their bid disqualified. · DISQUALIFICATION FACTOR C1 NETWORK EQUIPMENT: It will be the bidder’s responsibility to provide documentation about the compatibility requirements listed in this IFCB. Vendors that submit bids without documentation demonstrating the required compatibility listed in this IFCB will have their bids disqualified, unless that vendor has bid the preferred make/model number listed. · DISQUALIFICATION FACTOR INTERNAL CONNECTIONS: The applicant will not accept bids from manufacturers of equipment deemed a national security threat by the Federal Communications Commission. The list of prohibited equipment is available here: https://www.fcc.gov/supplychain/coveredlist. Vendors that submit bids that include these manufacturers will have their bids disqualified. · DISQUALIFICATION FACTOR INTERNAL CONNECTIONS: Vendors must complete and include the C2 Cover Page with their bid. Bids received without the cover page will be disqualified. · DISQUALIFICATION FACTOR INTERNAL CONNECTIONS: Service providers are required to bid the entire hardware project. Bids for individual components of the project will be disqualified. · DISQUALIFICATION FACTOR INTERNAL CONNECTIONS: It will be the bidder’s responsibility to provide documentation about the compatibility requirements listed in this IFCB. Vendors that submit bids without documentation demonstrating the required compatibility listed in this IFCB will have their bids disqualified, unless that vendor has bid the preferred make/model number listed. · DISQUALIFICATION FACTOR INTERNAL CONNECTIONS: Applicant will not accept bids for refurbished equipment. Any bids containing refurbished equipment will be disqualified. Services and Equipment Requested : CATEGORY ONE LEASED WIDE AREA NETWORK CIRCUIT One connection any delivery/technology type. Leased dark fiber bidders should bid two strands. Lit leased fiber bidders should bid 10GB bandwidth. The connection will be from the Admin Building, 245 Bradford, Gilmer, TX 75644, to the new ECC Building, 320 N Bledsoe St, Gilmer, TX 75644. LEASED WIDE AREA NETWORK CIRCUITS DISQUALIFICATION FACTOR: Any and all installation charges must be identified on your bid. If you submit a bid indicating that installation charges may apply without listing those charges, we will consider your bid incomplete and disqualify your bid. LEASED WIDE AREA NETWORK CIRCUITS DISQUALIFICATION FACTOR: Bids submitted for services to incorrect addresses will be disqualified. SELF PROVISIONED NETWORK The district will accept bids for any type of technology that can achieve their connectivity goals including fiber, wireless, purchased radio/wireless bridges, etc. The connection will be from the Admin Building, 245 Bradford, Gilmer, TX 75644, to the new ECC Building, 320 N Bledsoe St, Gilmer, TX 75644. SELF PROVISIONED NETWORK DISQUALIFICATION FACTOR: Bids submitted for services to incorrect addresses will be disqualified. OPERATIONS AND MAINTENANCE SERVICES One connection from the Admin Building, 245 Bradford, Gilmer, TX 75644, to the new ECC Building, 320 N Bledsoe St, Gilmer, TX 75644. C1 NETWORK EQUIPMENT Type of Equipment Quantity Vendor Should Bid Preferred Make/Manufacturer Switches 2 10 Gbps SFP + optics LC COMPATIBILITY REQUIREMENT C1 NETWORK EQUIPMENT Switches must be compatible with Ruckus switches. DISQUALIFICATION FACTOR C1 NETWORK EQUIPMENT: It will be the bidder’s responsibility to provide documentation about the compatibility requirements listed in this IFCB. Vendors that submit bids without documentation demonstrating the required compatibility listed in this IFCB will have their bids disqualified, unless that vendor has bid the preferred make/model number listed. DISQUALIFICATION FACTOR C1 NETWORK EQUIPMENT: Service providers are required to bid the entire hardware project. Bids for individual components of the project will be disqualified. DISQUALIFICATION FACTOR C1 NETWORK EQUIPMENT: Vendors must complete and include the C1 Cover Page with their bid. Bids received without the cover page will be disqualified. DISQUALIFICATION FACTOR C1 NETWORK EQUIPMENT: The applicant will not accept bids from manufacturers of equipment deemed a national security threat by the Federal Communications Commission. The list of prohibited equipment is available here: https://www.fcc.gov/supplychain/coveredlist. Vendors that submit bids that include these manufacturers will have their bid disqualified. CATEGORY TWO INTERNAL CONNECTIONS The district is replacing end of life switches at the High School campus. They are also adding equipment for their new Early Childhood Center. No installation is needed. Type of Equipment Quantity Vendor Should Bid Preferred Make/Manufacturer Racks 1 At least 10 U Switches 14 Ruckus 48 port POE with 5 year licensing UPS/Battery Backup 1 Eaton, 200W minimum. 120V – L5 -30P input. Rack mount. Runtime 10+ minutes Wireless Access Points 26 AP 4000 Extreme Networks with 5 year licensing Cabling 40 Network drops for switches & WAPs NOTE: We are requesting WAP or switch licenses on this IFCB, which sometimes may be categorized as BMIC or MIBS by USAC (the BMIC and MIBS boxes on the 470 have been checked to cover this scenario). COMPATIBILITY REQUIREMENT C2 INTERNAL CONNECTIONS WAPs must be compatible with Extreme Cloud. DISQUALIFICATION FACTOR INTERNAL CONNECTIONS: It will be the bidder’s responsibility to provide documentation about the compatibility requirements listed in this IFCB. Vendors that submit bids without documentation demonstrating the required compatibility listed in this IFCB will have their bids disqualified, unless that vendor has bid the preferred make/model number listed. DISQUALIFICATION FACTOR INTERNAL CONNECTIONS: The applicant will not accept bids from manufacturers of equipment deemed a national security threat by the Federal Communications Commission. The list of prohibited equipment is available here: https://www.fcc.gov/supplychain/coveredlist. Vendors that submit bids that include these manufacturers will have their bids disqualified. DISQUALIFICATION FACTOR INTERNAL CONNECTIONS: Vendors must complete and include the C2 Cover Page with their bid. Bids received without the cover page will be disqualified. DISQUALIFICATION FACTOR INTERNAL CONNECTIONS: Service providers are required to bid the entire hardware project. Bids for individual components of the project will be disqualified. DISQUALIFICATION FACTOR INTERNAL CONNECTIONS: Applicant will not accept bids for refurbished equipment. Any bids containing refurbished equipment will be disqualified. There is an additional document associated with this IFCB. Please click the buttons to download the document. Gilmer_C1_Cover_Page.pdf Gilmer_C2_Cover_Page.pdf 2024_C2_Bidding_Instructions108.pdf Answer:

Bid Protests Not Available