FEED THROAT ASSEMBL

THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN
AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS
REGULATIONS (22 C.F.R 120-30) AND THE ARMS EXPORT
CONTROL ACT (22 U.S.C.A. 2778-2779). ANY
MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES IS
REQUIRED TO REGISTER WITH THE DIRECTORATE OF
DEFENSE TRADE CONTROLS (DDTC), DEPARTMENT OF STATE.
DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED
PRIOR TO AWARD. ADDITIONAL EXPORT RESTRICTIONS APPLY
AS INDICATED HEREIN. FAILURE TO SUBMIT DIRECTORATE
OF DEFENSE TRADE CONTROLS (DDTC) REGISTRATION WHEN
REQUESTED WILL RESULT IN WITHDRAWAL OF QUOTES/OFFERS.

_______________EXCEPTION DATA____________________

CFAT TO INCLUDE 5 ITEMS OF PN# 5830095, AND ALL
SUBASSEMBLIES

______________END OF EXCEPTIONS__________________

THE ITEM BEING PROCURED IS A CRITICAL GUN PART
ITEM WITH UNIQUE REQUIREMENTS.

CONTRACTOR FAT APPLIES.

PER FAR 52.209-3:
(a) THE CONTRACTOR SHALL TEST 5 UNIT(S)...
AT LEAST 10 CALENDAR DAYS BEFORE THE BEGINNING
OF FIRST ARTICLE TESTING, THE CONTRACTOR SHALL
NOTIFY...

(b) THE CONTRACTOR SHALL SUBMIT THE FAT REPORT
WITHIN 90 CALENDAR DAYS... (NOTE: THE DELIVERY
SCHEDULE ON THE FACE OF THE SOLICITATION REFLECTS
ONLY THE TIME TO DELIVER THE SUPPLIES.)

WITHIN 45 CALENDAR DAYS AFTER THE GOVERNMENT
RECEIVES THE FIRST ARTICLE THE CONTRACTING
OFFICER SHALL NOTIFY...

DISPOSITION OF FIRST ARTICLES:
THE CONTRACTOR MAY DELIVER APPROVED UNDAMAGED FIRST ARTICLE SAMPLES AS
PART OF THE PRODUCTION QUANTITY.

AFTER RECEIPT OF QUOTES, OFFERORS MAY BE
CONTACTED TO PRICE THE FAT REQUIREMENT.

PRODUCT INSPECTION WILL BE CONDUCTED BY THE DCMA
QAR AT THE ACTUAL MANUFACTURER'S FACILITY
IDENTIFIED ON THIS CONTRACT.  THE IDENTIFICATION
OF THE ACTUAL MANUFACTURER MUST BE SUBMITTED TO
THE CONTRACTING OFFICER FOR INCLUSION IN THE
AWARD. UPON AWARD, ANY CHANGES TO THE ABOVE MUST
BE APPROVED BY THE PCO VIA FORMAL CONTRACT
MODIFICATION.

PRODUCT VERIFICATION TESTING (PVT) CLAUSE DLAD
52.246-9004 MAY BE INVOKED FOR THE REFERENCED
CONTRACT. IF INVOKED, PVT SAMPLES MUST BE
INSPECTED, PACKAGED AND MARKED AS REQUIRED IN THE
CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED DURING
TESTING.

PRODUCT VERIFICATION TESTING, IF INVOKED,
WILL BE PERFORMED PRIOR TO ACCEPTANCE OF
EACH SHIPMENT.  THE CONTRACTOR MUST PROVIDE
PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED
IN THE PRODUCTION OF PARTS ON THIS CONTRACT.
FIVE (5) PVT SAMPLES, UNLESS OTHERWISE
SPECIFIED, WILL BE REQUIRED TO BE IDENTIFIED
TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT
IN FOR TESTING.

CERTIFICATE OF CONFORMANCE IS NOT AUTHORIZED.

****************************************************************

52.246-11 Higher Level Contract Quality Requirement (Manufacturers)

FAR CLAUSE 52.246-11 APPLIES.  A QUALITY MANAGEMENT PROGRAM MEETING THE
REQUIREMENTS OF ISO 9001:2008; A PROGRAM COMPARABLE TO ISO 9001:2008
(EXAMPLE SAE AS 9100), THE FOLLOWING TAILORED VERSION OF ISO 9001:2008;
OR A PROGRAM COMPARABLE TO THE TAILORED VERSION OF ISO 9001:2008
(EXAMPLE SAE AS 9003) IS REQUIRED. MIL-I-45208 AND MIL-Q-9858 ARE
OBSOLETE AND NO LONGER CONSIDERED SUITABLE WHEN HIGHER LEVEL QUALITY IS
REQUIRED. IN THE TAILORED VERSION OF THE ISO 9001:2008, ANY REFERENCES
WHICH CITE THE ENTIRE INTERNATIONAL STANDARD ARE INTERPRETED AS
EXCLUSIONS TO THIS DOCUMENT.
DLA TAILORED HIGHER LEVEL QUALITY CLAUSE FROM ISO 9001:2008

4.1 General requirements, [excluding reference to 1.2 and excluding NOTE
3 c)]
4.2.1 General, [excluding subparagraph a)]
4.2.2 Quality manual, [excluding subparagraph a)]
4.2.3 Control of documents
4.2.4 Control of records
5.1 Management commitment
5.3 Quality policy
6.2.2 Competence, training and awareness
6.4 Work environment
7.1 Planning of product realization, [excluding NOTE 2]
7.2.1 Determination of requirements related to the product
7.2.2 Review of requirements related to the product
7.2.3 Customer communication
7.3.7 Control of design and development changes
7.4.1 Purchasing process
7.4.3 Verification of purchased product
7.5.1 Control of production and service provision
7.5.3 Identification and traceability
7.5.4 Customer property
7.5.5 Preservation of product
7.6 Control of monitoring and measuring equipment
8.1 General, [excluding subparagraph b) and subparagraph c)]
8.2.2 Internal audit
8.2.4 Monitoring and measurement of product
8.3 Control of nonconforming product
8.5.2 Corrective action
8.5.3 Preventive action

DLAD 52.246-9003, MEASURING AND TEST EQUIPMENT,
APPLIES.

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.

THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH
MUST MEET QPL/QML SPECIFICATIONS.BY SUBMITTING
AN OFFER, THE OFFEROR AGREES TO PROVIDE QPL/QML
COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE
APPLICABLE QPL(S)/QML(S).

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO,OR COME IN DIRECT
CONTACT WITH,ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

A metal casting process was identified as a means to manufacture this
item.   Tooling is required to produce a casting.  For sourcing,
tooling, materials or other information, please contact the appropriate
assistance team: (Aviation, C&E Supply Chains) [email protected]; (Land
& Maritime Supply Chains) [email protected]

THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO
EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA
AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED
THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE
DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO
INTERNATIONAL AGREEMENTS.

TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY
CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE
WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO:

DLA LOGISTICS INFORMATION SERVICE
FEDERAL CENTER
74 WASHINGTON AVE., NORTH
BATTLE CREEK, MI 49037-3084

TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A
CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT,
DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY
THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN
EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF
GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE.

NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL
DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN
APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO
RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA.

NOTE:  JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO
THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA
UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY
PERMITTED BY DODD 5230.25."

DLAD PROVISION 52.211-9009 IS APPLICABLE TO THIS
SOLICITATION, THEREFORE SURPLUS MATERIAL WILL
NOT BE CONSIDERED. IF PRESENT IN THE
SOLICITATION, PROVISION 52.211-9003 AND CLAUSE
52.211-9000 ARE NOT APPLICABLE.

,,SPI 11282011 WAS ADDED DEC 7,2011
,,METHOD 33
,,PRESERVATIVE MIL-L-46000
,,CUSHIONING PPP-C-1797 TYPE 1
,,BAG MIL DTL-117-TYPE 111 CLASS C
,,CONTAINER ASTM-D5118 STYLE RSC-GR-W5C.

IAW BASIC DRAWING NR 19200 5830095
REVISION NR G   DTD 06/05/2012
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12579607
REVISION NR C   DTD 08/04/2009
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 10001 3010125
REVISION NR G   DTD 12/03/2013
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 3010127
REVISION NR F   DTD 05/07/2008
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 5830096
REVISION NR M   DTD 04/05/2011
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 3010126
REVISION NR J   DTD 03/12/2012
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12479550
REVISION NR A   DTD 04/30/2003
PART PIECE NUMBER:

IAW REFERENCE UNK QPL-3150-34 NOT 1
REVISION NR 34  DTD 10/03/2006
PART PIECE NUMBER:

IAW REFERENCE UNK QPL-16173-84 NOT 1
REVISION NR 84  DTD 10/03/2006
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12479550
REVISION NR A   DTD 03/31/2008
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 5830095
REVISION NR F   DTD 05/07/2008
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 5830095
REVISION NR     DTD 01/28/2013
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 L12S3018-12993884
REVISION NR     DTD 03/02/2012
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 5830095SPI
REVISION NR E   DTD 09/04/2003
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 5830095
REVISION NR G   DTD 06/05/2012
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12993884
REVISION NR G   DTD 07/18/2013
PART PIECE NUMBER: