Vendor is responsible to deliver and stock items at designated place (Delivery point) in SP# 47, Daegu storage or Bldg# 410, Camp Carroll,

ITEM – Twin XL (MATTRESS) - at a minimum 38” X 80” X 9.5”– DOUBLE SIDED MATTRESS SPEC (159EA)

LAYER 1. 312 Coil Innerspring Unit, at a minimum 13 Gauge (2.5 mm) With a 6 Gauge (4.9 mm) Border Rod

LAYER 2. Insulator Pad, 2 OZ. – Each Side at a minimum

LAYER 3 Foam Support – at a minimum 3/4” – 19.2 Kg/m3 Density –20 ILD Each Side LAYER

4. Foam Support – at a minimum 1” – 19.2 Kg/m3 Density –30 ILD - Each Side LAYER 5. At a minimum 1/4” Thick, 24 Kg/m3 Density - 20 ILD Quilt Foam

LAYER 6. Fire Barrier Fiber- Performance G2100 – 305 g/m2 at a minimum

LAYER 7. Cover Cotton Dark Navy Color Damask antimicrobial– 420 g/m2- Quilted at a minimum

► PACKAGED IN A 4 MIL BAG

► THE INSULATOR PAD AND THE FOAM WILL BE FASTENED TO THE INNERSPRING UNIT

WITH 15D50D RINGS (150 PER MATTRESS MINIMUM). THE FINISHED STYLE SHALL BE

TAPED EDGED WITH A MINIMUM 6” – 2 OZ. COVER FLANGE AND A 1.25” POLYESTER

BINDING TAPE. THE BORDER WILL BE QUILTED TO MATCH THE TOP SIDES OF THE MATTRESS

► FOAM GUARDS: At a minimum 8 X 12 X 3- ADDED FOR CORNER SUPPORT Firm Style

-Minimum 13 gauge Bonnel type coils

-Minimum 6 gauge steel border rods

-Minimum Over 210 Denier Cotton or Equal Ticking with Flame Retardant

-Ticking shall have the following properties at a minimum:

Crack and Stain resistant

Antimicrobial / antifungal

Antibacterial and Anti-bedbug resistant Fluid Resistant

PROOF AND CERTIFICATION OF TESTING TO MEET BOTH FALMABILITY STANDARDS. (Vendor

should provide to FMB as Original Flame Resistant Certification by Korea Fire Department)

• Non-allergenic

• Wipe to clean and odor free

• Flame retardant and antistatic

• Shall have blue binding tape 7/8” W minimum

• Shall have a minimum of seven (7) layers of quilting and padding Mattress shall comply with U.S. Flammability Standards

• 16 CFR 1632 (Cigarette ignition)

• 1 July 2007 16 CFR 1633 1 (open flame)

2 EA textile material trademarks (size: 5 cm x 10 cm) is required to affix on both long side of mattress with made date by sewing

WARRANTY: Warranty for vendor shall be at minimum two years in a written statement upon receipt of award, the contractor shall provide one (1) sample product with a full size for approval within 14 calendar days to verify FMB Staffs can cut and disassemble the sample product. Once the sample product is approved, the contractor shall deliver entire quantities within 45 days of acceptance of sample product