11/16/09
AMENDMENT (A00003) TO SOLICITATION FOR USCGC HUDSON (WLIC-801) 160 FOOT CUTTER IS AS FOLLOWS: INCORPORATES CUTTER DRAWING 4301-001 AS REFERENCED IN Specification Rev-1, dated 11/10/09.
QUOTES ARE DUE 11/19/2009 AT 9:00 a.m. E.S.T. PLEASE BE SURE TO ATTACH THIS SIGNED FORM WHEN SUBMITTING YOUR QUOTE.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
AMENDMENT (A00002) TO SOLICITATION FOR USCGC HUDSON (WLIC-801) 160 FOOT CUTTER IS AS FOLLOWS: Incorporates Specification Rev-1, dated 11/10/09. Change to Geographical restriction is hereby increased an add an additional 60 nautical miles; The vessel is restricted to an area no greater than 460 Nautical Miles one way or 920 round-trip from the cutter's homeport and no open water transits.
QUOTES ARE DUE 11/19/2009 AT 9:00 a.m. E.S.T. PLEASE BE SURE TO ATTACH THIS SIGNED FORM WHEN SUBMITTING YOUR QUOTE.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
0/28/2009
AMENDMENT (A00001) TO SOLICITATION FOR USCGC HUDSON (WLIC-801) 160 FOOT CUTTER IS AS FOLLOWS: Change to add specific information to the Nautical Mile Geographical Restriction. The vessel is restricted to an area no greater than 400 Nautical Miles one way or 800 round-trip from the cutter's homeport and no open water transits.
QUOTES ARE DUE 11/16/2009 AT 9:00 a.m. E.S.T. PLEASE BE SURE TO SUBMIT A SIGNED SF30 FORM (ATTACHED) WHEN SUBMITTING YOUR QUOTE.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
10/14/09 AMEND NOTICE: SOLICITATION FOR USCGC HUDSON POSTED WITH ATTACHED FILES.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The United States Coast Guard Maintenance & Logistics Command, Atlantic intends to issue a Commercial Request for Quote (RFQ) for Dry Dock and repairs to the USCGC HUDSON (WLIC-801) 160-FOOT A CLASS CONSTRUCTION BUOY TENDER.
The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items, and FAR Subpart 13.5, Test Program for Certain Commercial Items.
The simplified acquisition will be issued as Small Business Set-Aside Solicitation, Request for Quote (RFQ), on or about October 14, 2009.
The solicitation will be issued electronically via the Federal Business Opportunity web page at http://www.fedbizopps.gov. It is incumbent upon contractors to monitor the FEDBIZOPS web page for the RFQ release and all subsequent amendments. Hard copies of the specification and solicitation will not be issued.
The NAICS Code is 336611. All work will be performed at the contractor's facility. The performance period is schedule for FORTY-NINE (49) calendar days and is expected to begin on or about 8 February 2009.
The scope of the acquisition will include, but is not limited to:
1. Perform Ultrasonic Thickness Measurements
2. Remove, Inspect, and Reinstall Propeller Shafts
3. Renew Mechanical Shaft Seal Assemblies
4. Renew Water-Lubricated Shaft Bearings
5. Renew Propeller Shaft Sleeve(s)
6. Remove, Inspect, and Reinstall Propellers
7. Perform Minor Repairs and Reconditioning of Propeller
8. Clean, Inspect, and Test Grid Coolers
9. Renew Depth Indicating Transducers
10. Overhaul and Renew Sea Valves
11. Renew Sea Strainer(s)
12. Remove, Inspect and Reinstall Rudder Assemblies
13. Inspect Various Deck Fittings
14. Preserve Construction Deck
15. Preserve Weather Decks
16. Preserve Underwater Body "Partial"
17. Preserve Underwater Body "100%"
18. Preserve Stern Tubes
19. Renew Cathodic Protection System
20. Routine Drydocking
21. Provide Temporary Logistics
22. Reseal Cosmetic Polymeric Deck Covering Systems
23. Renew Bilge Longitudinals
24. Renew Starboard Exhaust Stack Plating
25. Inspect Various Deck Plating
26. Inspect and Preserve Winch Foundations
27. Preserve Spud and Spud Well Surfaces
28. Shrink Wrap Crane
A CD-ROM containing all applicable drawings will be sent via U.S. mail, if requested. Send all requests to [email protected] The CD-ROM sets are available of all cutters and will be free of charge to contractors upon request. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc).
Trained welders who have been certified by the applicable regulatory code performance qualification procedures shall accomplish all welding and brazing. For further information or questions regarding this solicitation, please contact Nancy Brinkman at (757) 628-4579, or by email at [email protected]