SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions.
SLAC has a requirement for domestically sourced of the following:
Description:
Item #1 - Diamond anvil, type IIas, Boehler-Almax design, 16-sided, diameter 3.10 mm 70° (X-ray aperture 4¿), culet of 0.30 mm, (100)-oriented, Raman ultra low fluorescence [P01928] Quote: 190702KDH,QTY 2
Item #2 - Diamond anvil, type Ia, Boehler-Almax design, 16-sided, diameter 3.10 mm 70° (X-ray aperture 4¿), culet of 0.30 mm, (100)-oriented [P01036],QTY 4
Item #3 - Diamond anvil, type IIas, Boehler-Almax design, 16-sided, diameter 3.30 mm 85° (X-ray aperture 4¿), culet of 0.30 mm, (100)-oriented, Raman ultra low fluorescence [P01929],QTY 2
Item #4 - Diamond anvil, type Ia, Boehler-Almax design, 16-sided, diameter 3.30 mm 85° (X-ray aperture 4¿), culet of 0.30 mm, (100)-oriented [P00539],QTY 4
Item #5 - Diamond anvil, type IIas, standard design, 16-sided, diameter 3.00 mm, culet of 0.50 mm, (100)-oriented, Raman ultra low fluorescence [P01937],QTY 2
Item #6 - Diamond anvil, type Ia, standard design, 16-sided, diameter 3.00 mm, culet of 0.50 mm, (100)-oriented [P01005],QTY 8
Item #7 - Diamond anvil, type IIas, standard design, 16-sided, diameter 3.00 mm, culet of 0.30 mm, (100)-oriented, Raman ultra low fluorescence [P01937],QTY 2
Item #8 - Diamond anvil, type Ia, standard design, 16-sided, diameter 3.00 mm, culet of 0.30 mm, (100)-oriented [P01005],QTY 4
Item #9 - Diamond anvil, type Ia, standard design, 16-sided, diameter 3.00 mm, culet of 0.20 mm, (100)-oriented [P01005],QTY 6
Item #10 - Diamond anvil, type Ia, standard design, 16-sided, diameter 3.00 mm, culet of 0.30 mm, (100)-oriented, partially perforated from the table side, diameter of end of partial perforation of 0.10 mm (=W), remaining diamond thickness of 0.20 mm (=D),[P01005],QTY 4
Item #11 - Carbide seat for Boehler-Almax design anvil, according to drawing Tapered Diameter 12.00 mm (=D), Height 3.00mm (=H), Taper of 5° (=T), Aperture 70° (=A) for anvil 3.10 mm 70° [ P01290],QTY 6
Item #12 - Carbide seat for Boehler-Almax design anvil, according to drawing ¿Tapered¿ Diameter 12.00 mm (=D), Height 3.00mm (=H), Taper of 5° (=T), Aperture 85° (=A), for anvil 3.30 mm ¿ 85° [ P01290], QTY 6

Provide a price and lead time quotation with signed Representations & Certifications by not later than April 4 2019.
Source selection will be based on lowest price technically acceptable
Payment Terms: N-30
Freight terms: FOB Destination
The resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms & Conditions for Commercial Supplies and Services under $100,000 M365 (Rev 17Feb2015) will be made a part of the resulting order.
Your firm is required to be registered in the System for Award Management (www.sam.gov).
E-VERIFY REQUIREMENTS
This solicitation falls under the reporting requirements of E-Verify. Within thirty (30) days of award of a Subcontract the awardee must provide proof of enrollment in the E-verify Program. If proof of enrollment is not received within the specified timeframe the subcontract may be subject to cancellation. If you are unfamiliar with E-verify the following link will provide you with detailed information. www.dhs.gov/E-Verify

Bid Protests Not Available