1.0 ABSTRACT
Provide two (2) Converteam technical representatives to assist the ship's crew with Automation and Propulsion annual checks and training.

2.0 REFERENCES: None Additional

3.0 ITEM LOCATION AND DESCRIPTION
3.1 Location/Quantity.
3.1.1 Location: Machinery Spaces
3.1.2 Quantity: None
3.2 Item Description/Manufacturer's Data: None

4.0 GOVERNMENT FURNISHED EQUIPMENT/ MATERIALS/ SERVICES: None

5.0 NOTES
5.1 Send all access requests to the Port Engineer Contact in Para 5.4
5.2 Performance period shall be from 24 February to 16 March 2011.
5.3 Performance location is Chinhae, South Korea (location subject to change).
5.4 Port Engineer Contact is Andrea Carey, Office 757-443-0880, Cell 757-406-4506, E-Mail: [email protected]
5.5 This ship contains High Voltage (HV) electrical systems. The contractor and subcontractors shall obey all posted and verbal instructions regarding safety and exclusion from High Voltage areas. At no time shall a contractor or subcontractor approach, work on, or enter a High Voltage area with out proper authorization.
5.6 THE USNS CARL BRASHEAR ELECTRICAL COLOR CODING DOES NOT FOLLOW CONSISTENT COLOR SCHEME. THE SHIP IS KNOWN TO HAVE CURRENT CARRYING CONDUCTORS COLORED GREEN, BLUE, BLACK AND WHITE. THE CONTRACTOR SHALL ASSUME ALL ELECTRICAL CABLES ARE HOT UNTIL TESTED OTHERWISE. THE CONTRACTOR SHALL TEST ALL ELECTRICAL CABLES TO ENSURE THEY ARE DEAD PRIOR TO WORKING ON THE ITEM.

6.0 QUALITY ASSURANCE REQUIREMENTS: All work to be done to the satisfaction of the Chief Engineer and the Port Engineer.

7.0 STATEMENT OF WORK:
7.1 Provide the services of two (2) Converteam technical representatives' to assist the ship's crew with automation and propulsions annual checks and training.
7.1.1 One (1) rep shall be experienced with T-AKE Automation Controls and related equipment. One (1) rep shall be experienced with T-AKE Propulsion Motor and related equipment.
7.2 Include travel to and from Chinhae, Korea where the USNS Carl Brashear shall be located.
7.3 Assist the crew with any preventative maintenance tests and provide training on same. Perform system checks on Automation and Propulsion Systems. As needed, verify all settings and connections are correct.
7.4 Provide recommendations for future work and upgrades that are needed. A written report shall be submitted to the Chief Engineer and Port Engineer in electronic format.
7.5 Reps to work 9-hour days for a total of 8 days during this Period of Performance. Two (2) of these days will be weekend days.
7.6 Contractor to prepare a condition report (service report) at the conclusion of all work. Provide electronic copies to the Port Engineer and Chief Engineer within ten days after completion of work.
7.7 Contractor POC:
7.7.1 Point of Contact For OEM Services:
Converteam Inc.
610 Epsilon Dr.
Pittsburgh, PA 15238

POC David Thornton
(1-804-955-0015)
E-mail: [email protected]
Or Mike Kircher
(1-757-287-1889)
E-mail: [email protected]
8.0 GENERAL REQUIREMENTS: None

Bid Protests Not Available