THIS IS FOR THE PURCHASE OF

ITEM DESCRIPTION FOR PR: 0017828614    PGC NSN: 8315-01-280-0153

  COLLAR (1-3/4 INCH) FOR COAT, MAN'S:
  POLYESTER/WOOL GABARDINE, 10.6 OZ., BLUE
  SHADE 2312.
  .
 
ADDITIONAL INFORMATION FOR MIL-C-23486:
.
COLLAR, COAT, MAN'S: POLY/WOOL, GABARDINE, DARK
BLUE SHADE 2312, 1-3/4 INCHES
PATTERN DATE: 5 JUNE 1989
.
INTERIM SPECIFICATION CHANGES TO MIL-C-23486:
.
PAGE 2, SPECIFICATIONS, FEDERAL: DELETE
"V-T-276" AND SUBSTITUTE "A-A-52094"
.
PAGE 5, PARA 3.3.7.3, LINE 1, DELETE "V-T-276,
TYPE ICA" AND SUBSTITUTE "A-A-52094 TYPE III"
.
PAGE 6, PARA. 3.3.8, UNDER "NOTE", LINE 2,
AFTER "IN" INSERT "EITHER";
LINE 3, AFTER "ENVELOPE" INSERT "OR POLY-
ETHELENE BAG".
.
PAGE 6, PARA. 3.3.9, DELETE IN ENTIRETY AND ADD:
"THE COMBINATION LABEL SHALL BE MADE OF A SUIT-
ABLE COMMERCIAL CARDBOARD WITH STRING ATTACHED
AND TIED TO THE COLLAR THROUGH AN EYELET OR
PLASTIC BARB. THE LABEL SHALL BE LEGIBLY PRINTED
WITH THE FOLLOWING INFORMATION.
NOMENCLATURE NSN
SIZE WOOL PRODUCTS ACT INFORMATION
CONTRACT NO. CONTRACTOR NAME
.
PAGE 14, OPER 8.B, LINE 6, DELETE "1-1/8" AND
SUBSTITUTE "1-3/8 TO 1-1/2".
.
PAGE 23, DEFECT "EYELETS" I., DELETE ENTIRELY.
.
PAGE 26, ADD NEW PARAGRAPH
"4.5.2.3 INSPECTION LEVELS AND ACCEPTABLE
QUALITY LEVELS (AQL'S). THE INSPECTION LEVELS
AND AQL'S EXPRESSED IN DEFECTS PER 100 UNITS
(DHU) SHALL BE AS FOLLOWS:
.
FOR PARAGRAPH 4.5.2.2 GENERAL AND DETAILED
DEFECTS COMBINED
.
. AQL INSP LEVEL
.
MAJOR 0.65 II
MAJOR & MINOR A (COMB) 4.0
TOTAL (MAJOR, MINOR A & B
. COMBINED) 6.5
.
FOR DIMENSIONAL EXAMINATION 1.5 L-6
.
PAGE 27, PARA 4.5.3 ADD AS LAST SENTENCE "THE
INSPECTION LEVEL SHALL BE L-4 AND THE AQL SHALL
BE 4.0 DHU."
(Ref. W2045)
.
 
DELETE CURRENT "BARCODE LABEL/TAG"
REQUIREMENTS AND SUBSTITUTE THE FOLLOWING:
LABEL TAG.  EACH ITEM SHALL BE INDIVIDUALLY
BAR-CODED WITH A PAPER TAG FOR PERSONAL
CLOTHING ITEMS.  THE PAPER USED FOR THE TAGS
SHALL BE STANDARD BLEACHED SULFATE HAVING A
BASIS WEIGHT OF 100 POUNDS WITH A SMOOTH
FINISH TO ACCEPT THERMAL TRANSFER AND DIRECT
PRINTING.  THE TAGS SHALL HAVE A HOLE AND
SHALL BE ATTACHED TO EACH ITEM BY A FASTENER,
CLEARLY LEGIBLE AND READABLE BY SCANNER.
THE BAR CODING ELEMENT SHALL BE A 13 DIGIT
NATIONAL STOCK NUMBER (NSN). THERE SHALL BE
A 12 DIGIT UNIVERSAL PRODUCT CODE (UPC)
ASSIGNED FOR ALL NSNS BY THE GOVERNMENT.
THE INITIAL "UPC" MUST APPEAR BENEATH THE
CODE.  THE BAR CODES FOR NSN AND UPC SHALL BE
A MEDIUM TO HIGH DENSITY AND SHALL BE
LOCATED SO THAT THEY ARE COMPLETELY VISIBLE
ON THE ITEM WHEN IT IS FOLDED AND PACKAGED
AS SPECIFIED. THE LABEL'S LOCATION SHALL CAUSE
NO DAMAGE TO THE ITEM.
.
PACKAGING SECTION.  ADD THE FOLLOWING:
NOTE: UNIVERSAL PRODUCT CODE INFORMATION
THE GOVERNMENT ASSIGNED UNIVERSAL PRODUCT CODE
(UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON
WHICH THE NSN APPEARS.
.
THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/
TAGS:
.
BAR CODE OMITTED OR NOT         MINOR A
READABLE BY SCANNER
.
HUMAN-READABLE INTERPRETATION (HRI) MINOR A
OMITTED OR ILLEGIBLE
.
NOT VISIBLE ON FOLDED, PACKAGED ITEM  MINOR A
.
CAUSES DAMAGE TO THE ITEM    MAJOR
.
APPLICABLE DOCUMENTS: THE FOLLOWING LIST OF
DOCUMENTS IS APPLICABLE TO THIS PROCUREMENT:
(Ref. 93546)
.
 
NOTICE:  BE ADVISED THAT THIS ITEM REFLECTS
REDUCED AQL'S.
MATERIAL ACCEPTANCE:
(A) ALL SAMPLING ACCEPTANCE NUMBERS ARE REDUCED
BY ONE-THIRD WHERE THE ACCEPTANCE NUMBER IS
EQUAL TO OR GREATER THAN THREE(3).  FOR EXAMPLE,
WHERE ANSI/ASQC Z1.4 SAMPLING ACCEPTANCE NUMBER
IS THREE(3), THE NEW ACCEPTANCE NUMBER IS
TWO(2).  FOR A POINT SYSTEM, IF ACCEPTANCE WAS
PREVIOUSLY 150, THE NEW ACCEPTANCE NUMBER IS
100;
(B) A SAMPLING ACCEPTANCE NUMBER OF TWO(2) IS
REDUCED TO ONE(1);
(C) A SAMPLING ACCEPTANCE NUMBER OF ONE(1)
REMAINS THE SAME.
(ref. T1721)

 
ADDITIONAL INFORMATION FOR A-A-52094A:

SIZE 16; TWIST Z; TYPE II; 16.0 OUNCES NOMINAL;
GLAZED FINISH

NO ADDITIONAL INFORMATION

 
ADDITIONAL INFORMATION FOR A-A-50196:
.
INTERIM SPECIFICATION CHANGES TO
A-A-50196A:
PAGE 4, PARAGRAPH 4.1 PACKAGING.; PARAGRAPH
4.2 PACKING.; PARAGRAPH 4.3 PALLETIZATION.;
PARAGRAPH 4.4 MARKING.; DELETE IN THEIR
ENTIRETY AND SUBSTITUTE:
4.1 PRESERVATION, PACKING, AND MARKING. THE
PRESERVATION, PACKING, AND MARKING SHALL BE
AS SPECIFIED IN THE CONTRACT OR PURCHASE
ORDER."
.
PAGE 4, 5.1: ADD THE FOLLOWING SUBPARAGRAPH:
"F. FINISH REQUIRED, SPECIFY SOFT OR WAX
(SEE 2.6).".
.
PAGE 5, PARAGRAPH 5.2 SOURCE OF GOVERNMENT
DOCUMENTS. ADD BELOW "ARE AVAILABLE FROM"
"DODSSP - CUSTOMER SERVICE".
(Ref. T1074)
.
 
ADDITIONAL INFORMATION FOR NN-P-71:
.
NO ADDITIONAL INFORMATION FOLLOWS..
(Ref. T0558)
.
 
ADDITIONAL INFO FOR UU-P-268: UU-P-268 IS
CANCELLED.
USE A-A-203C DATED 1/3/96 AND A-A-1894A DATED
5/27/93.
(ref. T0688 - 9/11/06)

 
MIL-DTL 32075: LABEL FOR CLOTHING, EQUIPAGE, AND
TENTAGE, GENERAL USE REPLACES DDD-L-20
(Ref. T0451 - June 19, 2007)

 
ADDITIONAL INFORMATION FOR MIL-C-368:
.
(USE OF IMPORTED YARN AUTHORIZED FOR
CLASS 1 CLOTH)
INTERIM CHANGES TO MIL-C-368J:
.
PAGE 2, PARA. 1.2, ADD THE FOLLOWING:
"CLASS 4 - TWILL, 3.7 OUNCE, RELAXED FINISH.".
.
PAGE 3, PARA. 2.2, ADD THE FOLLOWING:
"AATCC 20 - FIBER ANALYSIS: QUALITATIVE"
.
PAGE 4, TABLE I, UNDER "CLASS" COLUMN, DELETE
"1" AND SUBSTITUTE "1 AND 4".
.
PAGE 8, ADD THE FOLLOWING NEW SUBPARAGRAPH:
"3.8.1 RELAXED FINISH. CLASS 4 CLOTH SHALL HAVE
A RELAXED FINISH APPLIED ON A TENTER FRAME
DURING THE FINISHING PROCESS.".
.
PAGE 8, TABLE II, UNDER TEST METHOD COLUMN,
LINE 1, DELETE "1600" AND SUBSTITUTE "AATCC 20".
.
PAGE 8, TABLE II, ADD THE FOLLOWING:
"SHRINKAGE (CLASS 4) 3.8, 3.8.1 5580".
(Ref. T0902)
.
 
ADDITIONAL INFORMATION FOR MIL-F-495:
.
NOTE OF REINSTATEMENT 1/19/2001.
(Ref. T1192)
.
 
ADDITIONAL INFORMATION FOR MIL-DTL-10176:
.
INTERIM SPECIFICATION CHANGES TO MIL-DTL-10176K:

WHEN AIR FORCE SHADE 1605 IS SPECIFIED, THE
CLOTH SHALL BE PIECE DYED.
.
PAGE 7
3.7.3, LINE 2: DELETE "5.5" AND SUBSTITUTE "5.0"
ADD THE FOLLOWING PARAGRAPHS:
"3.7.4 WATER REPELLENT TREATMENT. WHEN SPECIFIED
, THE CLOTH SHALL BE GIVEN AN APPROVED DURABLE
FLUOROCHEMICAL TYPE WATER REPELLENT TREATMENT
AND SHALL CONFORM TO THE REQUIREMENTS
SPECIFIED IN 3.7.2 WHEN TESTED AS SPECIFIED IN
4.4.4.
3.7.4.1 SPRAY RATING. THE RESULTS OF THE THREE
INDIVIDUAL DETERMINATIONS ON THE SAMPLE UNIT FOR
SPRAY RATING SHALL BE EQUAL TO OR BETTER THAN
RATINGS OF 90,90,80 INITIALLY AND 80,80,70 AFTER
ONE DRYCLEANING WHEN TESTED AS SPECIFIED IN
4.4.4."
PAGE 9, PARAGRAPH 4.3.3.1 YARD-BY-YARD
EXAMINATION, LINE 3, DELETE "10" AND SUBSTITUTE
"7", LINE 4, DELETE "12" AND SUBSTITUTE "8"
PAGE 10
TABLE II, BELOW "PH": ADD THE FOLLOWING UNDER
THEIR RESPECTIVE COLUMNS:
"WATER REPELLENCY:
SPRAY RATING:
INITIAL--------3.7.3.1---------5526
AFTER 1 DRYCLEANING----3.7.3.1---5508 AND 5526
.
SPONGING:
COLD WATER SPONGING IS REQUIRED. A PROPER
ALCOHOL WETTING AGENT SHALL BE USED TO INSURE
SHRINKAGE IS ACCOMPLISHED AND WATER RESISTANT
FINISH IS NOT RELEASED.
THE WATER REPELLANT TREATMENT MUST BE
APPLIED BEFORE THE SPONGING OPERATION.
.
ALL THE SPECIFICATION REQUIREMENTS MUST BE MET.
.
CODE OF FEDERAL REGULATIONS
.
16 CFR PART 1500- FEDERAL HAZARDOUS SUBSTANCES
ACT REGULATIONS.
29 CFR PART 1910- OCCUPATIONAL SAFETY AND HEALTH
STANDARDS.
(APPLICATIONS FOR COPIES OF REFERENCED
DOCUMENTS SHOULD BE ADDRESSED TO U.S
GOVERNMENT PRINTING OFFICE, SUPERINTENT OF
DOCUMENTS, MAIL STOP: SSOP, WASHINGTON, DC
20402-9328.)
.
PRINCIPLES AND METHODS OF TOXICOLOGY,
A. WALLACE HAYES (EDITOR), 1989, PP 394-396.
.
(APPLICATIONS FOR COPIES OF REFERENCED
DOCUMENTS SHOULD BE ADDRESSED TO RAVEN
PRESS,1185 AVENUE OF THE AMERICAS, NEW YORK,
NY 10036.)
.
TOXICITY.  THE FINISHED CLOTH SHALL NOT
PRESENT A DERMAL HEALTH HAZARD WHEN USED
AS INTENDED.
.
TOXICITY ASSESSMENT.  THE CONTRACTOR MUST
FURNISH INFORMATION WHICH CERTIFIES THAT
THE FINISHED PRODUCT IS COMPOSED OF MATERIALS
WHICH HAVE BEEN SAFELY USED COMMERCIALLY OR
PROVIDE SUFFICIENT TOXICITY DATA TO SHOW
COMPATIBILITY WITH PROLONGED, DIRECT SKIN
CONTACT. AT A MINIMUM, TOXICITY DATA SHOULD
INCLUDE RESULTS FROM A PRIMARY DERMAL IRRITATION
STUDY IN LABORATORY ANIMALS AND A REPEATED
INSULT HUMAN PATCH TEST (MODIFIED DRAIZE
PROCEDURE). THE LATTER MUST BE CONDUCTED UNDER
THE SUPERVISION OF A QUALIFIED DERMATOLOGIST
USING AT LEAST 100 FREE LIVING INDIVIDUALS.
.
INTERIM CHANGES TO TYPE II, CLASS 12 CLOTH,
NAVY SHADE 3346 ONLY.
APPLICABLE WHEN PROCURING CLOTH FOR THE
FOLLOWING ITEMS:
COAT, MANS, BLUE, DRESS,   MIL-C-29107
COAT, WOMAN'S, BLUE, DRESS, MIL-C- 29628
SKIRT, WOMAN'S, BLUE, DRESS, MIL-S-29631
SLACKS, WOMAN'S,            MIL-S-29630
TROUSERS, MANS, CLASS 12   MIL-T-41828
(REF. T0969)
.

 
ADDITIONAL INFORMATION FOR MIL-C-29405:
.
WITH INTERIM CHANGES TO MIL-C-29405:
NOTE - REDUCED AQLS APPLY AS FOLLOWS:
PAGE 6, PARA 4.4.3, LINE 5, DELETE "10"
AND SUBSTITUTE "7".
.
(Ref. T0993)
 
ADDITIONAL INFORMATION FOR MIL-P-15011:
.
NO ADDITIONAL INFORMATION FOLLOWS.
(Ref. T1368)
.
 
ADDITIONAL INFORMATION FOR MIL-B-17757:

MIL-B-17757 IS CANCELLED WITHOUT REPLACEMENT.
ASTM-D-5118 IS AUTHORIZED FOR USE IN LIEU OF
MIL-B-17757
(ref. T0857 - 6/15/06)

 
ADDITIONAL INFORMATION FOR MIL-C-43718:
.
MIL-C-43718C HAS BEEN CANCELLED
A-A-52106 HAS BEEN AUTHORIZED AS A REPLACEMENT
.
INTERIM SPECIFICATION CHANGES TO MIL-C-43718C:
.
PAGE 3, PARA. 2.2, ADD THE FOLLOWING:
"AATCC 20 - FIBER ANALYSIS: QUALITATIVE"
.
PAGE 5, PARA. 3.9,DELETE ENTIRELY AND SUBSTITUTE
"3.9 SEAM EFFICIENCY. ALL STAPLE FIBER
BASED CLOTH SHALL HAVE A SEAM EFFICIENCY OF NOT
LESS THAN 80 PERCENT; WHEREAS, 100 PERCENT
TEXTURIZED FILAMENT POLYESTER SHALL HAVE A SEAM
EFFICIENCY OF NOT LESS THAN 70 PERCENT WHEN
TESTED AS SPECIFIED IN 4.4.3."
.
PAGE 8, TABLE II, UNDER TEST METHOD COLUMN,
LINE 1, DELETE "1600" AND SUBSTITUTE "AATCC 20".
(Ref. T1124)
.
 
ADDITIONAL INFORMATION FOR A-A-52106:
.
INTERIM CHANGES TO A-A-52106:
.
PAGE 1, UNDER ABSTRACT. AFTER "THE CLASS 3
CLOTH IS INTENDED FOR USE AS LINING MATERIAL
IN DRESS COATS." ADD "CLASS 4 CLOTH IS INTENDED
TO BE USED AS A GARMENT LINING. CLASS 5 CLOTH
IS INTENDED FOR USE AS A NECKTIE AND NECKTAB
OUTERSHELL FABRIC."
PAGE 1, CLASSIFICATION. ADD CLASS 4 - LIGHT
WEIGHT 2.4 OZ; 2/1 RIGHT HAND TWILL USING
100% FILAMENT POLYESTER SINGLE PLY YARNS FOR
BOTH CLASS 4 AND CLASS 5.
CLASS 5 - MEDIUM WEIGHT 3.0 OZ; 5/1 HERRINGBONE
TWILL
PAGE 1, PARAGRAPH 1.1 CLASSIFICATION: ADD
PAGE 1, GENERAL DESCRIPTION. LINE 5 AFTER
"YARNS" ADD "THE CLASS 4 CLOTH SHALL BE A TWO
UP-ONE DOWN RIGHT HAND TWILL. THE CLASS 5 CLOTH
SHALL BE A FIVE UP-ONE DOWN HERRINGBONE TWILL.
THE YARNS FOR CLASS 4 CLOTH SHALL BE SINGLE PLY
WITH A NOMINAL DENIER OF 70 FOR THE WARP YARNS
AND 150 FOR THE FILLING YARNS.
PAGE 2, TABLE I CLOTH REQUIREMENTS AFTER
CLASS 3" ADD INFORMATION FOR "CLASSES 4 AND 5"
CHARACTERISTIC CLASS 4 CLASS 5
MATERIAL CONTENT,
PERCENT:
POLYESTER 100% 100%
COTTON 0 0
RAYON 0 0
COLORFASTNESS TO:
PERSPIRATION GOOD GOOD
SUBLIMATION GOOD GOOD
WET DRY-CLEANING GOOD GOOD
CROCKING (MIN.) 3.5 3/ 3.5 3/
(BLACK OR DARK
BLUE COLORS) 1.0 3/ 1.0 3/
LABILE SULFUR CONTENT 4/ 4/
WEIGHT, OZ. /SQ. YD.
(MIN.) 2.4 3.0
YARNS PER INCH (MIN.)
WARP 124 140
FILLING 76 75
BREAKING STRENGTH
POUNDS (MIN.)
WARP 140 160
FILLING 110 130
TEARING STRENGTH
POUNDS (MIN.)
WARP 5.0 14.0
FILLING 3.0 10.5
PAGE 2, PARAGRAPH 2.1 GENERAL DESCRIPTION: AFTER
"THE CLASS 5 CLOTH SHALL BE A FIVE UP-ONE DOWN
"THE CLASS 5 CLOTH , USING 100 % FILAMENT
HERRINGBONE TWILL." INSERT "THE CLASS 6 CLOTH
POLYESTER SINGLE PLY WITH BLACK 70 DENIER
NOMINAL WARP AND AIR FORCE BLUE 1622 150 DENIER
NOMINAL FILLING YARNS."
USING 100% FILAMENT POLYESTER SINGLE PLY WITH 70
DENIER NOMINAL IN THE WARP AND 150 DENIER
HERRINGBONE TWILL." INSERT "THE CLASS 6 CLOTH
POLYESTER SINGLE PLY WITH BLACK 70 DENIER
NOMINAL WARP AND AIR FORCE BLUE 1622 150 DENIER
NOMINAL FILLING YARNS."
USING 100% FILAMENT POLYESTER SINGLE PLY WITH 70
DENIER NOMINAL IN THE WARP AND 150 DENIER
NOMINAL IN THE FILLING DIRECTION."
PAGE 2, PARAGRAPH 2.2 PHYSICAL REQUIREMENTS:
TABLE I. CLOTH REQUIREMENTS, ADD THE FOLLOWING
PAGE 3, AFTER 2.3 LENGTH AND PUT-UP. ADD THE
FOLLOWING NEW PARAGRAPH. "2.4 COLOR. THE COLOR
OF THE FINISHED CLOTH SHALL BE AS SPECIFIED (SEE
5.1) AND SHALL MATCH THE STANDARD SAMPLE FOR
SHADE. CLASS 5 FABRIC IS MADE FROM DYED WARP
AND DYED FILLING IN TWO DIFFERENT COLORS. CLASS
5 FABRIC SHALL BE AIR FORCE SHADE BLUE 1622
ROLL # 89-2.
(Ref. T1514)
.
 
ADDITIONAL INFORMATION FOR MIL-I-45208:

NOTE:  MIL-I-45208 HAS BEEN CANCELLED AND
REPLACED BY THE FOLLOWING: INTERNATIONAL
STANDARDS ISO 9001:2000 OR AMERICAN SOCIETY FOR
QUALITY ASQ 2003 VERSION.

HIGHER LEVEL INSPECTION SYSTEM:
THE INSPECTION SYSTEM(S) MUST BE SUBMITTED WITH
YOUR BID PROPOSAL FOR EVALUATION AND APPROVAL BY
DSCP'S CONTRACTING OFFICER.
INSPECTION SYSTEM(S) COMPLIANT/BUT ARE NOT
LIMITED TO THE INTERNATIONAL STANDARDS ISO 9002
OR ASQ 2003 MAY BE UTILIZED IF TAILORED TO THE
SPECIFIC QUALITY ASSURANCE REQUIREMENTS IN THIS
SOLICITATION.

(Ref. T1286 - 9/11/06)

 
ADDITIONAL INFORMATION FOR FED-STD-191:

FED-STD-191A NOTICE 7, DATED AUGUST 9, 2000 IS
HEREBY INACTIVE FOR NEW DESIGN.  WHEN NOT USING
FED-STD-191, SEE INTERIM CHANGES TO END ITEM
SPECIFICATION FOR REPLACEMENT ASTM.

INTERIM CHANGES TO FED-STD-191A:
TEST METHOD 5202, PARA. 5.3, DELETE FIRST
SENTENCE AND SUBSTITUTE:  "THE SPECIMEN SHALL BE
CLAMPED FIRMLY, WITH ONE END FLUSH WITH THE
OUTER EDGE OF THE VISE, SUCH THAT ONE INCH OF
SPECIMEN LIES WITHIN THE CLAMP AND ONE INCH OF
THE SPECIMEN EXTENDS BEYOND THE CENTER OF
ROTATION (FACE OF THE VISE), AND WITH THE LONG
EDGE PARALLEL TO THE FACE OF THE DIAL PLATE".

TEST METHOD 5309.1 ABRASION RESISTANT OF TEXTILE
WEBBING. PAGE 1, PARA 4.1.2,LINE 4: DELETE
"B-97" AND SUBSTITUTE "B-91".

THE FOLLOWING METHODS ARE IDENTIFIED AS
SPECIFYING OZONE DEPLETING SUBSTANCES: 1100,
1200, 1240, 1400, 1410, 1500, 1510,1520,1530,
1540, AND 1550.  PARA 5.1 OF THESE TEST METHODS
REQUIRE THE USE OF 1,1,1- TRICHLOROETHANE,
ALCOHOL OR ETHER. 1,1,1-TRICHLORETHANE IS AN
OZONE  DEPLETING SUBSTANCE (METHYL CHLOROFORM)
AND IS THEREFORE PROHIBITED. THE USE OF EITHER
ALCOHOL OR ETHER IS REQUIRED WHEN THESE METHODS
ARE IN BASIC OR ANY REFERENCED DOCUMENT.

METHOD 5202, STIFFNESS OF CLOTH, DIRECTIONAL;
CANTILEVER BENDING METHOD.  PAGE 2, PARA. 5.3
DELETE FIRST SENTENCE AND SUBSTITUTE WITH THE
FOLLOWING: "THE SPECIMEN SHALL BE CLAMPED
FIRMLY, WITH 1 END FLUSH WITH THE OUTER EDGE OF
THE VISE, SUCH THAT 1" OF THE SPECIMEN LIES
WITHIN THE CLAMP AND 1" OF THE SPECIMEN EXTENDS
BEYOND THE CENTER OF ROTATION (INNER FACE OF THE
VISE) AND WITH THE LONG EDGE PARALLEL TO THE
FACE OF THE DIAL PLATE."

METHOD 5556.1, MOBILE LAUNDRY EVALUATION FOR
TEXTILE MATERIALS, PAGE 5, PARA. 5.2.2, LINE 8:
DELETE SENTENCE BEGINNING WITH "THE SPECIMENS
AND BALLAST" IN ITS ENTIRETY AND SUBSTITUTE WITH
THE FOLLOWING: "THE SPECIMENS AND BALLAST SHALL
BE SEPARATED, OPENED TO FULL WIDTH AND PLACED IN
A PRE-HEATED DRYER HAVING A STACK TEMPERATURE OF
140-180 DEG. F.  THIS TEMPERATURE RANGE
CORRESPONDS TO A SETTING OF "HIGH" ON THE
TEMPERATURE INDICATOR ON THE DRYER.  DRYING
SHALL CONTINUE FOR 45-60 MINUTES OR UNTILSAMPLES
ARE DRY IN A ROTATING TUMBLE DRYER."

PAGE 5, PARA. 5.2.3, LINE 8: DELETE SENTENCE
BEGINNING WITH "THE SPECIMENS AND BALLAST" IN
ITS ENTIRETY AND SUBSTITUTE WITH THEFOLLOWING:
"THE SPECIMENS AND BALLAST SHALL BE SEPARATED,
OPENED TO FULL WIDTH AND PLACED IN A PRE-HEATED
DRYER HAVING A STACKTEMPERATURE OF 140-180 DEG.
F.  THIS TEMPERATURE RANGE CORRESPONDS TO A
SETTING OF "HIGH" ON THE TEMPERATURE INDICATOR
ON THE DRYER. DRYING SHALL CONTINUE FOR 35-40
MINUTES OR UNTIL SAMPLES ARE DRY."

METHOD 5931, ELECTROSTATIC DECAY OF FABRICS;
DETERMINATION OF PAGE 1, PARA. 3: AFTER NUMBER
OF DETERMINATIONS ADD "PER SAMPLEUNIT".  PAGE 1,
PARA. 4: DELETE "APPARATUS" AND SUBSTITUTE
"APPARATUS".  PAGE 1, PARA. 5.1, LINE 3: AFTER
"AT" DELETE"APPROXIMATELY".

PAGE 2, PARA. 5.2, LINES 2, AND 5: AFTER "OF"
ADD "+-".  LINE 6: AFTER "TO" ADD "+-".

PAGE 2, PARA. 5.3: DELETE IN ITS ENTIRETY AND
SUBSTITUTE WITH THE FOLLOWING:"5.3 MOUNT A
SPECIMEN TIGHTLY ACROSS THE ELECTRODES,
CENTERING IT OVER THE SENSOR OPENING.  THE
SURFACE OF THE TEST SPECIMEN (BACK OR FRONT)
SHALL FACE THE SENSOR. RECORD (OPTIONAL) THE
RESIDUAL CHARGE LEVEL ON THE SAMPLE AS SEEN BY
THE SENSOR, INCLUDING POLARITY.
NOTE THAT TEST SAMPLES WITH THE RESIDUAL CHARGE
LEVELS OF LESS +500 VOLTS YIELD THE BEST
RESULTS.  APPLY +5000 VOLTS TO THEELECTRODES FOR
A PERIOD OF 20 SECS.  AT THE END OF THE 20
SECOND PERIOD, THE HIGH VOLTAGE (5000 VOLTS)
SHALL BE TURNED OFF ANDTHE SPECIMENS IMMEDIATELY
GROUNDED.  THE VOLTAGE BEHAVIOR OF THE SPECIMEN
WITH RESPECT TO TIME SHALL BE PLOTTED ON THE
RECORDER. NOTE: IN SOME CASES, THE TEST
EQUIPMENT WILL DISPLAY VOLTAGE AND DECAY TIME
INFORMATION AND A CHART RECORDER IS NOT
NECESSARY."

PAGE 2, PARA. 5.4, LINE 3: DELETE SENTENCE
BEGINNING WITH "IF THE SPECIMEN DID" IN ITS
ENTIRETY.

PAGE 2, PARA. 5.5: DELETE PARAGRAPH IN ITS
ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING:
"RECORD THE MAXIMUM VOLTAGE LEVEL(INCLUDING
POLARITY) AND DECAY TIME TO 10% OF THE MAXIMUM
VOLTAGE LEVEL ACHIEVED."

PAGE 2, PARA. 5.6, LINE 1: ADD THE FOLLOWING
PRIOR TO 1ST SENTENCE: "REVERSE VOLTAGE POLARITY
REPEAT MEASUREMENT, ANDRECORD RESULTS."

PAGE 3, PARA. 6.6: DELETE PARAGRAPH IN ITS
ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: "THE
AVERAGE TIME TO DECAY TO 10%OF THE MAX VOLTAGE
SHALL BE INCLUDED FOR EACH OF THE WARP & FILLING
DIRECTIONS, AS WELL AS THE OVERALL AVERAGE, FOR
EACHFABRIC TESTED.  THESE WILL BE OBTAINED BY
AVERAGING THE TEST RESULTS (ABSOLUTE VALUE OF)
TOGETHER FOR BOTH VOLTAGEPOLARITIES.  UNLESS
OTHERWISE STATED IN THE REQUIREMENTS DOCUMENT,
THE FABRIC SHALL BE CONSIDERED ACCEPTABLE IF
THEAVERAGE MAXIMUM VOLTAGE IN BOTH THE WARP AND
FILLING DIRECTIONS IS LESS THAN 4000 VOLTS, AND
THE AVERAGE DECAY TIME (TO 10% MAXVOLTAGE) IS
GREATER THAN 0.5 SECONDS IN BOTH THE WARP AND
FILLING DIRECTIONS.  IT SHALL BE INDICATED
WHETHER THE FABRIC ISACCEPTABLE OR
NON-ACCEPTABLE."

PAGE 3, PARA. 7.1, SECOND COLUMN, LINE 2: DELETE
406C AND SUBSTITUTE WITH "406D".

AFTER PARA. 7.1, ADD THE FOLLOWING: "7.2 NOTE:
IF THE MODEL 406D STATIC DECAY METER, OR
EQUIVALENT, IS USED, A CHART RECORDER ISNOT
MANDATORY FOR THE TEST."
(Ref. T0215 - 05/17/07)

 
ADDITIONAL INFORMATION:  FED-STD-751 HAS BEEN
CANCELLED AND REPLACED BY ASTM-D-6193, 4/98
STANDARD PRACTICES FOR STITCHES AND SEAMS.
THIS STANDARD SHOULD BE USED IN PREFERENCE TO
FED-STD-751.

(ref. T0216 - May 18, 2006)

 
ADDITIONAL INFORMATION FOR MIL-STD-105:

NOTE:  MIL-STD-105 HAS BEEN CANCELLED AND
REPLACED BY THE FOLLOWING: "AMERICAN NATIONAL
STANDARDS INSTITUTE (ANSI) ANSI/ASQC Z1.4 -
SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY
ATTRIBUTES".
APPLICATION FOR COPIES SHOULD BE OBTAINED FROM:
AMERICAN SOCIETY FOR QUALITY
600 NORTH PLANKINTON AVENUE
MILWAUKEE, WI 53203

(Ref. T0301)

 
MIL-STD-129P, WITH CHANGE 4 - DEPARTMENT OF
DEFENSE STANDARD PRACTICE
MILITARY MARKING FOR SHIPMENT AND STORAGE -
DATED 19 SEPTEMBER 2007

INTERIM CHANGES:
OMISSION OF MARKINGS ON EXTERIOR SHIPPING
CONTAINERS OF ITEMS IN THE
DEFENSE SUPPLY CENTER (DSCP) CLOTHING AND
TEXTILE (C&T) DIRECTORATE:
THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN
THE NAME IDENTIFIES THE
MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR
SHIPPING CONTAINERS OF
DSCP C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE
MATERIAL AS BEING
CLOTHING, IT MAY REMAIN.  NSNS SHALL BE SHOWN ON
ALL SHIPPING
CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL
BE PLACED INSIDE THE
LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT.
THE WORDS "PACKING LIST
HERE" SHALL BE STENCILED, NOT HAND LETTERED, ON
THE CONTAINER.
(Ref. T0303 - May, 2006)

 
ADDITIONAL INFORMATION: MIL-STD-147D IS HEREBY
CANCELLED AND REPLACED
BY MIL-HDBK-774, "PALLETIZED UNIT LOADS", DATED
30 AUGUST 2004
(See T0035 for MIL-HDBK-774A)
(Ref. T0306 - 03/28/2007, paa2775)

I/A/W              A-A-52094
REFNO
AMEND NR
TYPE NUMBER

I/A/W              A-A-52106
REFNO
AMEND NR
TYPE NUMBER

I/A/W   STD NR FED-STD-191A(6) NOT 7
REFNO
AMEND NR A
TYPE NUMBER

I/A/W   STD NR FED-STD-751A(1)(1) NOT 2
REFNO
AMEND NR 1
TYPE NUMBER

I/A/W   SPEC NR MIL-B-17757E(2) NOT 2
REFNO
AMEND NR 2
TYPE NUMBER

I/A/W   SPEC NR MIL-C-368J
REFNO
AMEND NR J
TYPE NUMBER

I/A/W   SPEC NR MIL-C-43718C NOT 2
REFNO
AMEND NR C
TYPE NUMBER

I/A/W   SPEC NR MIL-DTL-10176K
REFNO
AMEND NR K
TYPE NUMBER

I/A/W   SPEC NR MIL-DTL-32075
REFNO
AMEND NR
TYPE NUMBER

I/A/W   SPEC NR MIL-I-45208A(2) NOT 2
REFNO
AMEND NR 2
TYPE NUMBER

I/A/W   SPEC NR MIL-P-15011J
REFNO
AMEND NR J
TYPE NUMBER

I/A/W   STD NR MIL-STD-105E NOT 2
REFNO
AMEND NR E
TYPE NUMBER

I/A/W   STD NR MIL-STD-129P(3)
REFNO
AMEND NR P
TYPE NUMBER

I/A/W   STD NR MIL-STD-147D NOT 2
REFNO
AMEND NR D
TYPE NUMBER

I/A/W   SPEC NR NN-P-71C NOT 1
REFNO
AMEND NR C
TYPE NUMBER

I/A/W   SPEC NR UU-P-268G(3) NOT 1
REFNO
AMEND NR 3
TYPE NUMBER

FOR A COPY OF THE SOLICITATION EMAIL [email protected].