G
Solicitation Number: 70Z085-19-Q-P45742 DOCKSIDE-REPAIRS-CGC-VISE
Notice Type: Sources Sought
The U.S. Coast Guard is looking for sources that would be interested in performing dockside repairs for Coast Guard Cutter VISE.
The performance period of this upcoming Dockside is 25 June 2019 to 23 July 2019.
It is anticipated requests for quotes will be issued approximately 25 February 2019 and the contract would be awarded around 25 April 2019.
VISE is a 75' Inland Construction Tender homeported in St. Petersburg, FL. There is only 42 work items on the requirement to be performed:
WORK ITEM 1: Main Diesel Engine (MDE) Exhaust Piping, Commercial Clean
WORK ITEM 2: Ship Service Diesel Generator (SSDG) Exhaust Piping, Commercial Clean
WORK ITEM 3: Boiler Exhaust Stack Uptakes, Commercial Clean
WORK ITEM 4: Vent Ducts (Engine and Motor Room All), Commercial Cleaning
WORK ITEM 5: Vent Ducts (Galley and Pantry Room All), Commercial Cleaning
WORK ITEM 6: Vent Ducts (All Other), Commercial Cleaning
WORK ITEM 7: Compressed Air Receivers and System Valves (All), Clean, Inspect, Hydro and Lift - Tender
WORK ITEM 8: Hull Fittings (Mooring and Towing), Inspect and Test - Tender
WORK ITEM 9: Boat Boom, Inspect and Service - Tender
WORK ITEM 10: Sewage Holding Tank(s), Clean and Inspect - Tender
WORK ITEM 11: Sewage Piping, Clean and Flush
WORK ITEM 12: Tanks (Sewage Holding), Preserve "100%" - Tender
WORK ITEM 13: Tanks (Sewage Holding), Preserve "Partial" - Tender
WORK ITEM 14: Tanks (Potable Water), Preserve "100%" - Tender
WORK ITEM 15: Temporary Services, Provide (at PHNSY) - Tender
WORK ITEM 16: Barge, Diesel Engine Exhaust Piping, Commercial Clean
WORK ITEM 17: Compressed Air Receivers and System Valves (All), Clean, Inspect, Hydro and Lift - Barge
WORK ITEM 18: Hull Fittings (Weight Handling Rigging Hardware), Inspect and Test - Barge
WORK ITEM 19: Crossdeck Winch, Inspect & Service- Barge
WORK ITEM 20: Hull Fittings (Mooring and Towing), Inspect and Test - Barge
WORK ITEM 21: Spuds, Overhaul - Barge
WORK ITEM 22: Spud Winches, Inspect & Service - Barge
WORK ITEM 23: {System} Piping, Renew
WORK ITEM 24: Lead Dust, Clean
WORK ITEM 25: Lead-Based Paint and Asbestos-Containing Material, Perform Spot Abatement
WORK ITEM 26: Vent Fans and Motors, Renew
WORK ITEM 27: Shaft Alley Hatch, Renew
WORK ITEM 28: Main Deck, Repair
WORK ITEM 29: Gaylord Hood System, Repair and Clean
WORK ITEM 30: Internal Doors, Renew
WORK ITEM 31: Deck Drain Piping, Renew
WORK ITEM 32: Fuel Valves, Renew
WORK ITEM 33: Grey Water Piping, Renew
WORK ITEM 34: Fan Coil Units, Renew
WORK ITEM 35: Grease Trap Piping Bulkhead Penetration, Renew
WORK ITEM 36: Pilothouse Window Seals, Renew
WORK ITEM 37: Condensate Drain Piping, Repair
WORK ITEM 38: Piping, Remove
WORK ITEM 39: Gooseneck Vent Pipes (Barge), Renew
WORK ITEM 40: Keel Cooler (Jacket Water) Piping, Repair
WORK ITEM 41: Lazarette Hatch, Renew
All repairs will take place at VISE's home port located at 600 8th Avenue, S.E. St. Petersburg, FL 33701.
The geographical restriction for this vessel is: Restricted to an area no greater than 400 nautical miles (nm) from the cutter's homeport and no open water transits.
Companies which would be interested in submitting a proposal for this requirement should reply to this sources sought notice noting their business size status such as large business, small business, HUBZone, Service-Disabled Veteran-owned, Women Owned Small Business etc.... Further if there are no past performance evaluations on file in the Past Performance Information System Retrieval database, contractors should provide a couple past performance references including the following information: contract numbers, project titles, dollar amounts, points of contact and telephone numbers.
Replies should be sent by 14 February 2019, 11:00 am Eastern Standard Time to: [email protected]
Shortly after receiving responses the Coast Guard will determine if this requirement will be set aside or unrestricted. After the determination a combined synopsis/solicitation will be posted on this website (https://www.fbo.gov/).
The NAICS Code is 336611. The small business size standard is less than 1,250 employees.
Contractors are reminded that in the case of a HUB Zone set-aside, FAR 52.219-3, "Notice of HUBZone Set-Aside or Sole Source Award" would apply which requires that at least 50 percent of the cost of personnel for contract performance be spent for employees of the concern or employees of other HUBZone small businesses. Contractors are also reminded that in the case of a Service-Disabled Veteran-Owned Small Business Set-Aside, FAR 52.219-27, "Notice of Service-Disabled Veteran-Owned Small Business Set-Aside" would apply which requires that at least 50 percent of the cost of personnel for contract performance be spent for employees of the concern or employees of other service disabled veteran owned small businesses.
Additionally, regarding FAR 52.219-30 "Notice of Set A-Side For Women-Owned Small Business Concerns...": A women-owned small business (WOSB) concern eligible under the WOSB Program, means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.
Primary Point of Contact:
Brian Forstner,
[email protected]
Phone: (757) 628-4753