NSN(s): 1710-01-454-7454

Item Description:

CABLE AND REEL ASSY

1710-01-454-7454

CABLE AND REEL ASSY

82N CSI ALRE

***MRI INSPECTION REQUIRED ON THECABLESAMPLESANDTHE

TERMINALS. REELS ARE CERTIFIED AND MARKED AT SOURCE.***

THIS NSN REQUIRES MATERIAL RECEIPT INSPECTION (MRI) AT NAVAIR

LKE PRIOR TO FINAL DELIVERY.

PLEASE INCLUDE PRODUCTION TESTING INSPECTION REPORT AND REQUIRED

MATERIAL CERTIFICATIONPACKAGEWITHPARTS.

IFPARTS MUST BE SHIPPED INDIVIDUALLY, PLEASE INCLUDE PRODUCTION

TESTING INSPECTION REPORT ANDREQUIREDMATERIALCERTIFICATION

PACKAGEWITH EACH PART.

PLEASE SHIP PARTS TO:

NAVAIR

CODE 4.8.8.8 / BLDG. 148-1

HWY 547

JOINT BASE MDL, NJ08733

ATTN:PAUL CAMPOS

MRI INSPECTION REQUIRED FOR THIS CONTRACT.

THE FOLLOWING DRAWINGS-DOCUMENTS SHALL APPLY TOTHISNSN:

Dwg-80020-524631(RevE)

DWG-16236-CN014547454

QAP-16236-SQAP014547454GFAT

QAP-16236-SQAP014547454GPLT

P/N 524630-1[SAMPLESSHALL CONSIST OF ANASSEMBLYOF A 2 FOOT LENGTH OF WIRE ROPE,

P/N A92791-37 AND THE POURED SOCKETP/N421404-1]

QAP-16236-SQAP014547454QA

QAP-80020-CDRL-16-12117A PTI

QAP-80020-CDRL-16-12117A COQC

QAP-80020-CDRL-16-12117AMP

QAP-80020-CDRL-16-12117A FAT PN421404-1

QAP-80020-CDRL-16-12117A FAT (PN524630-1 MOD)

QAP-80020-CDRL-16-12117A TIR(PN524630-1MOD)

TDR 16-12117A (GOV'T ONLY EXPIRES08/26/2017)

FAT AND MP HAVE BEEN WAIVED PER NAVAIR LAKEHURST FOR WRI CAGE 35043ONLY.SIZEREQUIREMENTS ON ZINC INGOTS FROM

DWG323822 ARE WAIVED FOR WRI CAGE 35043 ONLY. [RFV 16D0217(WRI14092016)].

RECEIPTINSPECTION:

POINT OF CERTIFICATION. NAVAIR LAKEHURST SOURCE WITH CONTRACTOR ASSIST

THE UNIT OF ISSUE IS CHANGING FROM RL TO AY ON01/FEB/2016.

(1 AY = 2,300 FT [WHICH CANSISTS OF 2WIRE ROPES OF 1150FT])

RA001: THIS DOCUMENT INCORPORATES TECHNICALAND/ORQUALITYREQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I'NUMBER)

SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL ANDQUALITYREQUIREMENTS FOUND ON THE WEB

AT:http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.

FOR SIMPLIFIED ACQUISITIONS,THEREVISION OF THE MASTER IN EFFECT ONTHE SOLICITATION ISSUE DATE OR THE AWARD

DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISIONOFTHE MASTER IN EFFECT ON THE RFPISSUE DATE APPLIES UNLESS

A SOLICITATION AMENDMENT

INCORPORATES AFOLLOW-ON REVISION, IN WHICHCASETHE AMENDMENT

DATECONTROLS.

RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS

RQ011: REMOVAL OFGOVERNMENTIDENTIFICATIONFROMNON-ACCEPTED

SUPPLIES

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

Certificate of QualityCompliance(CoQC)ContractData

Requirements Lists (CDRLs), DD Form 1423s, apply to this

procurement. Review the Technical DataPackage(TDP)for

additionalinformation. If CDRL-COQCCDRLs is missing from DLA

Collaboration Folders (CFolders) they can also beviewedin

Appendix 1 of the DLAMASTER LIST OF TECHNICAL AND QUALITY

REQUIREMENTS FOUND ONTHEWEBAT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

The following Contract Data RequirementsLists(CDRLs),DDForm

1423s, apply to this procurement. Review the Technical Data

Package (TDP) foradditionalinformation.

RC001:DOCUMENTATIONREQUIREMENTS FOR SOURCE APPROVAL REQUEST

(SAR)

AIRCRAFT LAUNCH AND RECOVERY EQUIPMENT(ALRE)CRITICAL

APPLICATIONITEM

SOURCEAPPROVAL - TO BE ELIGIBLE FOR AWARD UNDER THIS

SOLICITATION, AN OFFEROR MUST BE AN APPROVEDSOURCEOR PROVIDE

THEPRODUCT OF ANAPPROVED SOURCE AS DETERMINED BY THE

ENGINEERING SUPPORT ACTIVITY, NAVAL AIR WARFARECENTER(NAWC)

AIRCRAFT DIVISIONLAKEHURST. THECRITERIA AND PROCEDURES FOR

SOURCE APPROVAL ARE CONTAINED IN PART I OF THENAVALINVENTORY

CONTROL POINT (NAVICP)PHILADELPHIABROCHURE ENTITLED "SOURCE

APPROVAL INFORMATION BROCHURE FOR SPARES". THE LATESTVERSIONOF

THIS BROCHURE MAY BE OBTAINED BYACCESSING NAVICP'S WEBSITE:

HTTPS://WWW.NAVSUP.NAVY.MIL, OUR TEAM,NAVICP,BUSINESS

OPPORTUNITIES, COMMODITIES, SOURCEAPPROVALREQUEST (SAR)

BROCHURE SPARES

TO ASSIST IN THE DETERMINATION OF SOURCEAPPROVAL, THE OFFEROR

MAY BE REQUIRED TO SUBMIT TOASURVEY PRIOR TO AWARD IN WHICH

NAWC LAKEHURST MAY PARTICIPATE.

IN ADDITION, THEOFFERORMUST PROVIDE THEFOLLOWINGINFORMATION,

WHICH MAY BE CONSIDERED IN DETERMINING WHETHER THE OFFEROR IS AN

APPROVED SOURCE:

(1) A SOURCE APPROVAL LETTER FROMNAVICP'S ENGINEERING AND

PRODUCT SUPPORT DIRECTORATE; OR;

(2) OTHER EVIDENCE INDICATING THAT THE OFFEROR MEETSTHESOURCE

APPROVALCRITERIA.

ALL REQUESTS FOR WAIVERS OR DEVIATIONS CLASSIFIED AS CRITICAL,

MAJOR, OR MINOR MUST BE FORWARDEDTO THEDSC CONTRACTINGOFFICER

FOR REVIEW AND APPROVAL.

ALL ITEMS OF SUPPLY SHALL BE MARKED IAW MIL-STD-129. IN

ADDITION, EACH UNITPACKWILLBE MARKEDWITH LOT AND SERIAL

NUMBER (IF AVAILABLE), CONTRACTOR'S CAGE CODE, ACTUAL

MANUFACTURER'S CAGE CODE ANDPARTNUMBER.(February2016)

PCO MANDATORY INSPECTION. DURING PRODUCTION,

MANDATORY INSPECTION IS REQUIRED TO BE

ACCOMPLISHEDANDDOCUMENTED BYTHECONTRACTOR AS

FOLLOWS:

CRITICAL AND MAJOR CHARACTERISTICS AS IDENTIFIED

IN CLASSIFICATION OFCHARACTERISTICSBLOCKON

DRAWING(S),TECHNICAL SPECIFICATIONS, SECOND

TIER DOCUMENTS REFERENCED IN THE ACQUISITION

ITEM DESCRIPTION AND SPECIFIEDINTHE

PROCUREMENTDOCUMENT, AND CHARACTERISTICS

DEFINED AS:

(A) MATERIAL CERTIFICATIONS

(B) DESTRUCTIVE AND /ORNONDESTRUCTIVE

TESTRESULTS (WHENAPPLICABLE)

(C) ATTRIBUTES FOR PLATING HARDNESS

.I

MPORTANT MINOR CHARACTERISTICS SHALLBE

DEFINEDBY THE CONTRACTORSUBJECT TOQAR

CONCURRENCE, UNLESS OTHERWISE DEFINED ON

APPLICABLE DRAWING(S), SPECIFICATIONS

ANDCHARRACTERISTICSDEFINEDAS:

(A)DIAMETRICALAND LINEAR DIMENSIONS

HAVING A TOLERANCE OF +/- 0.005 INCH OR

LESS

(B) GEOMETRIC FEATURECONTROLS HAVINGATOTAL

TOLERANCE OF 0.003INCH OR LESS

(C) SURFACE FINISHES HAVING A 16 VALUE OR LESS

(D) CLASS THREE THREADS

(E)ANGULARTOLERANCESWITH A TOTAL RANGELESS

THAN 1 DEGREE

LEVEL OF INSPECTION: ANSI / ASQC Z1.4 FOR SINGLE

SAMPLING USING A GENERALINSPECTION LEVEL OII

(A)CRITICAL AND MAJOR CHARACTERISTICS: 100%

INSPECTION APPLIES

(B)IMPORTANT MINOR CHARACTERISTICS: AQLOF1.5

.C

ERTIFICATION /DATAREPORTS: THE CONTRACTOR IS

RESPONSIBLE FOR PREPARING A CERTIFICATE OF

QUALITY COMPLIANCE (COQC)INACCORDANCE WITH THE

DD FORM1423CONTRACT DATA REQUIREMENTS LIST

(CDRL). THE COQC CONTENT WILL INCLUDE AS A

MINIMUM THE DATADESCRIBED IN DLARCLAUSE

52.246-9000, IN ADDITION TO ALL PCO MANDATORY

INSPECTION RESULTS. THIS COQC REQUIREMENT

APPLIES TO EACH UNIT OFCONTRACTQUANTITY.

CLASS I OZONEDEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDERTHISCONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCTREQUIREMENTS.

SUBSTITUTECHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO

EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA

ANDELIGIBILITY FOR AWARD ARELIMITED TO THOSESUPPLIERS

QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY

EITHER THEDEPARTMENTS OF STATE OR COMMERCE;OR TOFOREIGN

SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS.

TO APPLY FOR JCP CERTIFICATION,COMPLETE DD FORM 2345,MILITARY

CRITICALTECHNICAL DATA AGREEMENT, FORMIS AVAILABLE AT THE

WORLD WIDEWEBADDRESS:

https://public.logisticsinformationservice.dla.mil/PublicHome/jc

p/default.aspx

OR BYWRITING TO:

DLALOGISTICSINFORMATIONSERVICE

FEDERAL CENTER

74 WASHINGTON AVE., NORTH

BATTLE CREEK, MI 49037-3084

TO MANUFACTURETHIS ITEM, NON-JCPCERTIFIED SUPPLIERS MUST

SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL

ASSISTANCE AGREEMENT,DISTRIBUTION AGREEMENTOROFF-SHORE

PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE

TRADE CONTROLS WITH THE OFFER,UNLESS AN EXEMPTIONUNDERTHE

PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OF GENERAL

APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE.

NON-JCPCERTIFIEDSUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL

DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN

APPLICABLEAGREEMENTORIDENTIFY WHICH ITAR/EAR EXEMPTION

APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL

DATA.

NOTE: JCPCERTIFIEDCONTRACTORS WHO RECEIVE TECHNICAL DATA

PURSUANT TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER

DISSEMINATE SUCH DATA UNLESS FURTHER DISSEMINATION OF THE

TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25.

MERCURY OR MERCURY CONTAININGCOMPOUNDSSHALL

NOT BE INTENTIONALLY ADDED TO, OR COME IN DIRECT

CONTACT WITH, ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THISCONTRACT.EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPONSYSTEMS;

ANDCHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURYSHALL BESHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

NOTE:THIS IS A RESTRICTEDS OURCE ITEM AND

REQUIRES ENGINEERING SOURCE APPROVAL BY THE

GOVERNMENT DESIGNCONTROL ACTIVITY.

THIS MATERIALMUST MEETNAVAIRAIRCRAFT LAUNCH &

RECOVERY EQUIPMENT TRACEABILITY REQUIREMENTS. BARE

ITEM MARKINGS SHALL BE IAW THE TECHNICALDATA

DRAWINGSPROVIDED.

BARE ITEM MATERIAL SHALL BE MARKED WITH CONTRACT

NUMBER, NAWC CAGE, AND PARTNUMBER UNLESSOTHERWISE

SPECIFICIED ONASSOCIATED DRAWING. IF A CONFLICT

EXISTS WITH MARKING REQUIREMENTS OF THIS 82N ALRE/SE

ITEM,THE ASSOCIATEDDRAWING REQUIREMENTSSHALL APPLY.

If this NSN provides Contract Data Requirement Lists (CDRLs) as

part of theTechnical Data Package, the line items from this

solicitation are not to be separately priced. Offerors must

factor into the enditem unit price all costsassociatedwith

thepreparation and delivery of the data deliverables in the

contract.

The GovernmentProcuring Activity has determined thatSurplusis

not Acceptable for this NSN.

(End of TQ Requirement)

RA001: THIS DOCUMENTINCORPORATES TECHNICALAND/ORQUALITYREQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTERLIST OF TECHNICALANDQUALITYREQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.FOR

SIMPLIFIED ACQUISITIONS,THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THEREVISIONOFTHE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, INWHICHCASE THE AMENDMENT DATE CONTROLS.

(End of STO)

RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS

(End of STO)

RQ009:INSPECTIONANDACCEPTANCE AT ORIGIN

(End of STO)

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

(End ofSTO)

SURPLUSIS NOT ACCEPTABLE FOR THIS NSN.

CRITICAL APPLICATION ITEM

WIRECO WORLD GROUPI NC. 80967 P/N 524631-1

INDUSTRIES DECABLES DACIER LTEE 35043 P/N 524631-1

WIREROPE WORKS INC 77141 P/N 524631-1

IAW REFERENCE DRAWING NR 80020 323182

REVISION NR FDTD09/14/1998

PARTPIECE NUMBER:

IAW REFERENCE DRAWING NR 80020 524630

REVISION NR E DTD 11/14/2014

PART PIECE NUMBER:

IAWREFERENCEDRAWING NR 80020 508056

REVISION NR R DTD 03/28/2008

PART PIECE NUMBER:

IAWREFERENCE DRAWING NR 80020 524631

REVISION NR E DTD11/14/2014

PARTPIECE NUMBER: 524631-1

IAW REFERENCE DRAWING NR 80020 419442

REVISION NR G DTD 02/29/2012

PART PIECENUMBER:

IAWREFERENCE DRAWINGNR 80020 323822

REVISION NR T DTD 02/12/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 80020 421404

REVISIONNR R DTD02/29/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 80020 A92791

REVISION NR 45 DTD 04/02/2012

PARTPIECENUMBER:

IAWREFERENCE DRAWING NR 16236 CN014547454

REVISION NR A DTD 08/11/2016

PART PIECE NUMBER:

IAW REFERENCE QAP16236CDRL-16-12117AFAT(524630-1MOD)

REVISION NR DTD 08/08/2016

PART PIECENUMBER:

IAW REFERENCE QAP 16236CDRL-16-12117AFAT(421404-1)

REVISION NR A DTD 08/08/2016

PART PIECE NUMBER:

IAW REFERENCE QAP 16236 CDRL-16-12117APTI

REVISIONNR A DTD 08/08/2016

PARTPIECE NUMBER:

IAW REFERENCE QAP 16236 CDRL-16-12117AMP

REVISION NR ADTD 08/08/2016

PART PIECE NUMBER:

IAW REFERENCE QAP16236CDRL-16-12117ACOQC

REVISION NR DTD 08/08/2016

PART PIECE NUMBER:

IAW REFERENCE QAP 16236 SQAP014547454QA

REVISION NR BDTD08/17/2016

PART PIECE NUMBER:

IAW REFERENCE QAP 16236SQAP014547454GFAT

REVISION NR B DTD 08/17/2016

PARTPIECE NUMBER:

IAWREFERENCE DRAWING NR 80020 MPR1221

REVISION NR R DTD 10/01/2001

PART PIECE NUMBER:

IAW REFERENCE QAP16236CDRL-16-12117AQPIE(524360-1MOD)

REVISION NR A DTD 08/08/2016

PART PIECE NUMBER:

IAW REFERENCE QAP16236SQAP014547454GPLT

REVISION NR B DTD 08/17/2016

PART PIECE NUMBER:

Quantity (including option quantity)

Per year:

1710-01-454-7454 - 96 assemblies per year

Unit of Issue:

1710-01-454-7454 - Assembly (AY)

Destination Information:  Inspection and acceptance at origin, FOB Destination

Delivery Schedule: 

1710-01-454-8454    491 days  (including FAT testing)

All responsible sources may submit an offer/quote which shall be considered.

Based upon market research, the Government is not using the policies contained in Part 12, Acquisition

of Commercial Items, in its solicitation for the described supplies or services. However, interested

persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice.

The solicitation will be available in FedBizOpps on its issue date of  3/14/17.

The Small Business size standard is 1250 employees.

Specifications, plans or drawings are not available.

The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government.  The total duration (base plus option years) shall not exceed  5  years. 

 This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1).  Approved sources are:
CAGE 35043 Wire Rope Industries LTC; CAGE 77141 Wirerope Works Inc; CAGE 80967 Wireco Worldgroup.

While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation.   Weighted averages will be applied to the evaluation.

Various Increments Solicited:

1710-01-454-7454:

 12 to 24, 25 to 48, 49 to 72 and 73 to 96

This procurement will be unrestricted.