Furnish all material, labor, and resources for installation of: Approximately 520 lf. X 8’ H chain link fence with brown privacy slats (wooden texture), including (2) 10’ x 8’ H chain link double swing gates with panic bars. Remove and dispose of approximately 520 lf x 6’ H galvanized existing chain link fence including post, concrete post footings, gates, tension wire, and top rail (in its entirety). Material Type: Fencing: 96” tall chain link fabric with knuckle to knuckle galvanize mesh with brown privacy slats. 129” tall 1 7/8 “diameter line posts with 12’ post footing diameter and 36”post footing depth. 132” 2 3/8 diameter terminal post with 12” post footing diameter and 36” post footing depth Top of fence 1-5/8 diameter top rail. 7 GA bottom of fence tension wire. Fence is brace with 1 5/8” diameter middle rail Fence contains vertical slats (please submit a sample for approval) Line post spacing 120” tie wire spacing is every 24” on rails. Gates: Gates openings width for the Double gates are 10’ Gates frames are to be constructed with 1 7/8” pipe. Gates are braced with 1 7/8” diameter horizontal brace. Gates are trussed with Truss Rods (3/8”) Fence contains vertical Slats.( please submit samples for approval) 1/4 “galvanize strike mounting plate 24” x 1/8” Panic Hardware plate Gates are hung with standard industrial 180 degree hinges. Gates are secured with a commercial drop rod assembly Tie wire spacing is every 24” on rails Knuckle/knuckle Selvage and 2” mesh size Drop rod to be 2” x 2” 14 gauge post to be installed into a sleeve embedded in concrete with rock ( 3/4 ) at the base for drainage. 4” Sch 40 Galv. OD Gate Posts set in 24” x 36” concrete hole 3/8 Truss Rods 3/16” x 11 GA Galvanize steel kick plates welded to gates on push side Install Von Duprin alarmed Panic Bar, Model # 2670 with US 28 finish. With Mortise Housing to accept Large Format Corbin Russwin Interchangeable Cores (submit specifications for approval) Gates to have industrial hinges and lockable drop rod type. All posts to have malleable iron post caps. All nuts, bolts, and washers are to be galvanized. All posts will be schedule 40 galvanized steel pipes. Match existing chain link wire gage. All footings shall be constructed with 3000 PSI concrete, dome finish (crown) top of concrete, above adjacent finished surfaces. Contractor is to provide porta-potty and wash station facilities for employees for the duration of the project. Location to be approved by a District project manager. Regrade all areas damaged adjacent fence cause by the installation. Fill all unused post holes Remove all unused soils from the site. On completion, ensure that all scrubs, trees and planting adjacent fence is left in an undamaged condition.

Bid Protests Not Available