Federal Bid

Last Updated on 09 Jun 2018 at 8 AM
Sources Sought
Location Unknown

Armament Tester Supportability and Feasibility Analysis (Technical Study)

Solicitation ID RM18-Armament_Tester_Supportability_and_Feasibility_Analysis
Posted Date 26 Apr 2018 at 6 PM
Archive Date 09 Jun 2018 at 5 AM
NAICS Category
Product Service Code
Set Aside No Set-Aside Used
Contracting Office Pk/Pz - Robins Afb
Agency Department Of Defense
Location United states
 

Sources Sought Synopsis

Armament Tester Supportability and Feasibility Analysis (Technical Study)

CAUTION:

This updated Sources Sought Synopsis (SSS) is being conducted for the purpose of identifying potential sources that possess the expertise, capabilities, and experience to meet the requirements of obtaining information relative to an upcoming procurement action in the Automatic Test Systems Division at Robins AFB, GA. Several of the questions in the updated survey have been revised in the hope of better defining the requirement. Contractors/Institutions responding to this Sources Sought Synopsis (SSS) are placed on notice that participation in this survey may not ensure participation in future solicitations or contract awards.  The Government will not reimburse participants for any expenses associated with their participation in this

survey.

PURPOSE/DESCRIPTION:

The Government is conducting market research to identify potential sources that possess the expertise, capabilities, and experience to perform a technical analysis and feasibility study of the existing testers shown below for a future sustainment strategy.

 

Platform

NSN

Tester

Part Number

OEM

A-10

 4920-01-066-2700

A-10 Gun Control Test Set (GCTS/ T-138)

209F109

General Electric

A-10

 4935-01-237-1804

A-10 Missile Launch Sys. Test Set (MLSTS)

25338-503

Base Ten Systems, Inc.

A-10

4920-01-505-0662

A-10 Test Set, Control (CTS)

25579-505

Base Ten Systems, Inc.

A-10

4933-01-049-7584

A-10 Bomb Rack Test Set (MAU-12/-40/-50)

7630933-10

U.S. Air Force

A-10

NSL - P/N 7533694-10

A-10 Ejector Rack Test Set (MER/TER/BRU-3A)

7533694-10

U.S. Air Force

A-10

4927-01-061-1850

A-10 MK III Test Set

11554090-2

U.S. Army Missile Command, Redstone Arsenal

A-10

4927-01-061-1851NM

A-10 MK  IV Test Set

11554129

U.S. Army Missile Command, Redstone Arsenal

A-10

4935-01-482-3400

A-10 Guided Missile Test Set (GMTS)

13A9710-4/-5/-6

Honeywell Intl Inc.

A-10

NSL   201256669-10

A-10 Portable Automated Test Station (PATS), PATS-70A  -- Not Fielded, ECD Feb 2019

201256669-10

Ogden Air Logistics Center

F-15

4920-01-495-3279

F-15 Stores Management System Test Set (SMSTS)/T-198

A05G0514-1-XX

Boeing

F-15

4920-01-495-3280

F-15 Stores Management Subsystem Test Set (SMSTS)/T-197

A05G0516-XX

Boeing

F-16

4920-01-537-7747

F-16 Stores System Tester (SST)

16U75A46002G001

BAE Systems

F-22

4920-01-484-6268KV

Common Organizational Level Tester (F-22)

ES125190-103

Lockheed Martin

MQ-9

4920-01-514-3404

MQ-9 Guided Missile Test Set (AWM103-9)

AN/AWM-103A 

Crane Division, Naval Surface Warfare Center

MQ-9

4920-01-586-8024

MQ-9 Guided Missile Test Set (AWM103-9)

AN/AWM-103B 

Crane Division, Naval Surface Warfare Center

Platform

NSN

Aircraft LRU
*In addition to aircraft LRUs

Part Number

OEM

N/A

1095-01-524-0082

Bomb Rack Unit (BRU-61/A)*

N/A

N/A

N/A

1095-01-524-3884

Bomb Rack Unit (BRU-61 T-1/A)*

N/A

N/A

* = Aircraft LRU

 

The tasks include:

Phase I:  Logistical Supportability Analysis Tasks

•a.       Task I:  Supportability - The Contractor shall perform research to determine the baseline of the existing legacy testers' supportability posture, to include Reliability and Maintainability, Diminishing Manufacturing Sources Material Shortages (DMSMS), and Part Obsolescence.  The Contractor shall determine what actions would be required to maintain the legacy testers over the next 45 years.

•b.      Task II:  Technology Assessment - The Contractor shall thoroughly review the technical requirements for the legacy testers and identify areas for improvement for the performance, maintainability, manufacturability, maintenance and sustainability of the test capability of the legacy testers. The Contractor shall identify and suggest improvements with the legacy testers that would improve or enhance the tester(s).  The Contractor shall develop a report identifying tradeoffs and justifications for each technological improvement area.

•c.       Task III:  Feasibility - The Contractor shall perform research to determine the feasibility of combining the fourteen (14) existing aircraft testers or performing another sustainment strategy, including TPSs in support of legacy aircraft platforms (A-10, F-15, F-16, and F-22).

•d.      Task IV:  Analysis of Alternatives (AoA) - develop an Economic Analysis to ensure the most cost effective solution, including the legacy testers, family of testers and a combined tester. At a minimum, the analysis should include:

                                                              i.      Upgrade and Maintain Legacy Testers

                                                            ii.      Re-host all Test Program Set on Existing Tester/Family of Testers

                                                          iii.      Develop New Tester - Consolidate all Testers

                                                          iv.      Develop Two Common Testers:  Consolidate A-10 Testers AND Consolidate F-15, F-16, F-22, MQ-9 Testers

                                                            v.      Develop One A-10 Common Tester (Consolidate A-10 testers) AND Maintain Legacy Testers (F-15, F-16, F-22, and MQ-9)

                                                          vi.      Develop Other Fighter Common Tester (Consolidate F-15, F-16, F-22, and MQ-9) AND Maintain A-10 Legacy Testers 

                                                        vii.      Develop a System Wrap Around Tester (Consolidate all legacy Flightline testers)

Phase II:  Technical Tasks/Requirement Analysis

•e.       Task V:  Technical Report- The Contractor shall perform an engineering technical investigation and analysis to determine the system requirements for functional and diagnostic testing of armament test equipment and the Unit Under Test (UUT) armament systems on F-15, F-16, A-10, MQ-9, and F-22 aircraft and armament test equipment. A Capabilities based assessment will be performed. Identification of signals, inputs, and outputs, and other technical data shall be performed, and a Requirement Correlation Matrix (RCM). This will include, at minimum, identifying power requirements, input and output signal information, and other necessary data of the Unit Under Test (UUT) and interact with aircraft or UUT Managers to identify requirements.


See attached Sources Sought Synopsis with Contractor Capability Survey and Performance Work Statement for additional information.
Bid Protests Not Available

Similar Past Bids

Western Nebraska 06 Oct 2014 at 10 AM
Location Unknown 13 Jun 2018 at 2 PM
Wright patterson air force base Ohio 26 Apr 2005 at 5 AM
Quantico Virginia 22 Feb 2006 at 5 AM
Quantico Virginia 21 Jun 2005 at 5 AM

Similar Opportunities

Hill air force base Utah 21 Nov 2025 at 5 AM (estimated)
Hill air force base Utah 21 Nov 2025 at 5 AM (estimated)
Washington 24 Jul 2025 at 4 AM