ARM ASSEMBLY,DEFECT
82N CAI ALRE
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

Certificate of Quality Compliance (CoQC) Contract Data Requirements
Lists (CDRLs), DD Form 1423s, apply to this procurement.  Review the
Technical Data Package (TDP) for additional information.  If
CDRL-COQCCDRLs is missing from DLA Collaboration Folders (CFolders) they
can also be viewed in Appendix 1 of the DLA MASTER LIST OF TECHNICAL AND
QUALITY REQUIREMENTS FOUND ON THE WEB AT:
 http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.  FOR LARGE
ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

The following Contract Data Requirements Lists (CDRLs), DD Form 1423s,
apply to this procurement.  Review the Technical Data Package (TDP) for
additional information.
-First Article Testing Report
-Production Test and Inspection Report
-Certificate of Quality Compliance
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND
NON-MANUFACTURERS)

ISO9000:1994, ISO9001:2000, ISO9001:2008,  ISO9001:2008 TAILORED,
 ISO9001:2015, AQS AC7004, AS9003, AS9100, MIL-I-45208, MIL-Q-9858 AND
EQUIVALENT ARE ACCEPTABLE QUALITY MANAGEMENT PROGRAMS FOR NAVAIR/NAVSUP
ALRE TDR APPROVED SOURCES.
NCLUDE RQ002 OBJECT TEXT ID ST
AIRCRAFT LAUNCH AND RECOVERY EQUIPMENT (ALRE) CRITICAL APPLICATION ITEM

SOURCE APPROVAL - TO BE ELIGIBLE FOR AWARD UNDER THIS SOLICITATION, AN
OFFEROR MUST BE AN APPROVED SOURCE OR PROVIDE THE PRODUCT OF AN APPROVED
SOURCE AS DETERMINED BY THE ENGINEERING SUPPORT ACTIVITY, NAVAL AIR
WARFARE CENTER (NAWC) AIRCRAFT DIVISION LAKEHURST. THE CRITERIA AND
PROCEDURES FOR SOURCE APPROVAL ARE CONTAINED IN PART I OF THE NAVAL
INVENTORY CONTROL POINT (NAVICP) PHILADELPHIA BROCHURE ENTITLED "SOURCE
APPROVAL INFORMATION BROCHURE FOR SPARES". THE LATEST VERSION OF THIS
BROCHURE MAY BE OBTAINED BY ACCESSING NAVICP'S WEBSITE:
HTTPS://WWW.NAVSUP.NAVY.MIL, OUR TEAM, NAVICP, BUSINESS OPPORTUNITIES,
COMMODITIES, SOURCE APPROVAL REQUEST (SAR) BROCHURE SPARES

TO ASSIST IN THE DETERMINATION OF SOURCE APPROVAL, THE OFFEROR MAY BE
REQUIRED TO SUBMIT TO A SURVEY PRIOR TO AWARD IN WHICH NAWC LAKEHURST
MAY PARTICIPATE.

IN ADDITION, THE OFFEROR MUST PROVIDE THE FOLLOWING INFORMATION, WHICH
MAY BE CONSIDERED IN DETERMINING WHETHER THE OFFEROR IS AN APPROVED
SOURCE:

(1) A SOURCE APPROVAL LETTER FROM NAVICP'S ENGINEERING AND PRODUCT
SUPPORT DIRECTORATE; OR;

(2) OTHER EVIDENCE INDICATING THAT THE OFFEROR MEETS THE SOURCE APPROVAL
CRITERIA.

ALL REQUESTS FOR WAIVERS OR DEVIATIONS CLASSIFIED AS CRITICAL, MAJOR, OR
MINOR MUST BE FORWARDED TO THE DSC CONTRACTING OFFICER FOR REVIEW AND
APPROVAL.

ALL ITEMS OF SUPPLY SHALL BE MARKED IAW MIL-STD-129.  IN ADDITION, EACH
UNIT PACK WILL BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE),
CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S CAGE CODE AND PART NUMBER.
(February 2016)

NOTE: THIS IS A RESTRICTED SOURCE ITEM AND
REQUIRES ENGINEERING SOURCE APPROVAL BY THE
GOVERNMENT DESIGN CONTROL ACTIVITY.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to
export-control of either the International Traffic in Arms regulations
(ITAR) or the Export Administration Regulations (EAR), and cannot be
exported without prior authorization from either the Department of State
or the Department of Commerce. Export includes disclosure of technical
data to foreign persons and nationals whether located in the United
States or abroad. This requirement applies equally to foreign national
employees and U.S. companies and their foreign subsidiaries. DFARS
252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control
technical data to DLA contractors that have an approved US/Canada Joint
Certification Program (JCP) certification, have completed the
Introduction to Proper Handling of DOD Export-Controlled Technical Data
Training and the DLA Export-Controlled Technical Data Questionnaire
(both are available at the web address given below), and have been
approved by the DLA controlling authority to access the
export-controlled data. Instructions for obtaining access to the
export-controlled data can be found at:
https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/

To be eligible for award, offerors and any sources of supply proposed
for use are required to have an approved JCP certification and have
been approved by the DLA controlling authority to access
export-controlled data managed by DLA. DLA will not delay award in
order for an offeror or its supplier to apply for and receive approval
by the DLA controlling authority to access the export-controlled data.

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS MATERIAL MUST MEET NAVAIR AIRCRAFT LAUNCH &
RECOVERY EQUIPMENT TRACEABILITY REQUIREMENTS. BARE
ITEM MARKINGS SHALL BE IAW THE TECHNICAL DATA
DRAWINGS PROVIDED.

BARE ITEM MATERIAL SHALL BE MARKED WITH CONTRACT
NUMBER, NAWC CAGE, AND PART NUMBER UNLESS OTHERWISE
SPECIFICIED ON ASSOCIATED DRAWING. IF A CONFLICT
EXISTS WITH MARKING REQUIREMENTS OF THIS 82N ALRE/SE
ITEM, THE ASSOCIATED DRAWING REQUIREMENTS SHALL APPLY.
If this NSN provides Contract Data Requirement Lists (CDRLs) as part of
the Technical Data Package, the line items from this solicitation are
not to be separately priced.  Offerors must factor into the end item
unit price all costs associated with the preparation and delivery of the
data deliverables in the contract.

The Government Procuring Activity has determined that Surplus is not
Acceptable for this NSN.
(End of TQ Requirement)
SERIALIZATION: Serialization is required for this ALRE CAI part as well
as the packaging for traceability. Contractor technical documentation
shall reflect the appropriate marking scheme. All serialized and lot
numbered CAI parts shall be accounted for; to include material scrapped
during manufacturing. Re-branding by suppliers which obscures the
original marking (part number, serial number, CAGE) of the OEM of ALRE
CAI parts is prohibited.
Please notify DLA Contracting Officer at time of quote if serialization
is not practical due to size, material property, unreasonable or
excessive cost.

CRITICAL APPLICATION ITEM

Hamill Manufacturing Company DBA 17661 P/N 514759-11
Entwistle Company, The 20722 P/N 514759-11

IAW REFERENCE DRAWING NR 80020 MPR1222
REVISION NR A   DTD 12/15/2017
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 80020 MPR1
REVISION NR E   DTD 04/06/1979
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 80020 MPR26
REVISION NR A   DTD 11/28/1972
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 80020 420394
REVISION NR G   DTD 11/14/2017
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 80020 516987
REVISION NR E   DTD
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 80020 514759
REVISION NR T   DTD 03/31/2017
PART PIECE NUMBER: P/N 514759-11

IAW REFERENCE DRAWING NR 80020 MPR1400
REVISION NR E   DTD 08/08/1985
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 80020 MPR46
REVISION NR     DTD 10/16/1972
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 80020 MPR1223
REVISION NR B   DTD 11/25/1991
PART PIECE NUMBER:

IAW REFERENCE QAP 16236 SQAP012718892CFAT
REVISION NR     DTD 09/02/2016
PART PIECE NUMBER:

IAW REFERENCE QAP 16236 SQAP012718892QA
REVISION NR B   DTD 08/20/2018
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 16236 CN012718892
REVISION NR B   DTD 08/20/2018
PART PIECE NUMBER:

IAW REFERENCE QAP 16236 CDRLS-012718892
REVISION NR     DTD 07/19/2018
PART PIECE NUMBER: