The Department of Veterans Affairs, VISN 6 Network Contracting Office (NCO) is conducting Market Research through this source sought to help determine the availability of qualified Service Disabled Veteran Owned Small Businesses (SDVOSB), Veteran Owned Small Businesses (VOSB) and Small Businesses (SB), capable of supplying Push-Behind Scrubbers for the Richmond VAMC. This requirement will be one time buy. Salient Characteristics All Purpose Cleaner Touchless Cleaning System Universal Chemical Storage, dual port 2 Stage Vacuum Motor, 900 Watts Waterlift: 81 in. Air Flow: 97 cfm Solution Tank: 20 gal Recovery Tank: 12 Gal Application Flow: 500 psi Hose Lengths: 15 ft Blower Hose: 13 Ft. Power Cord: 25 ft Rear Wheels: 10 in (2 wheels) Front Casters: 4 in Machine Weight: No more than 95 lbs. Must have the ability to have various attachments to include: Two bend wand Variable pressure gun Scrub brush w/squeegee Floor squeegee Hand squeegee tool Fill hose Metering tip packet Micro fiber mop. Push behind floor machine Push Behind Floor Machine with various capabilities. 14x20-inch cleaning pal 1.5 hp motor Orbit speed: 3,540 rpm with .25 in orbital diameter 50ft, yellow power cord Noise level: 68 dba 63lb weights Total Machine Weight: no more than 170 lbs. (with weights) Must Include: 3 21 lb weights to be included Safety switch 6 in wheels Wheels-up and wheels-down capabilities Baseboard Cleaner Detachable Handle Dust Containment Kit Solution Tank Kit 3M SPP Pads, Red Scrub Pads, Blue Scrub Pads, Black Scrub Pads, Carpet Bonnet, Grout Pad, Diamond Pads, Sand Screens Dimensions: No more than 21 x 21 x 45 (LxWxH) Push behind, mid-size floor scrubber Battery - 24 Volt (4 - 6V) 242 Ah Wet Batteries Battery Type - (4) 242 Ah Wet Brush Motor - 3/4 HP Brush/Pad Pressure - 65 lbs. (scrubbing) & 125 lbs. (stripping) Brush/Pad Speed - 2250 RPM Cleaning Width - 28 inches Color Blue Dimensions - 60.5" L x 29" W x 44" H Drive Motor - 1/2 HP Max Speed - 3 MPH (260 ft/min) Noise Level (dB) 63 Number of Brushes 1 Operating Weight (lbs.) 610 Operating Weight (lbs.) with Text - 794 lbs. w/ batteries & full solution tank Packaged Weight (lbs.) - 845.0 Power Source Battery Product Type - Hard Floor Cleaning Machines Pump Flow Rate - Normal - 0.12 gal/min Heavy - 0.65 gal/min Recovery Tank Capacity - 23 gallons Run Time - 4 hours Scrub Style Orbital Solution Capacity - 23 gallons Squeegee Width - 35 inches Vacuum Motor - 3/4 HP (3 stage) Walk Behind Burnisher Walk Behind Battery Burnisher 20 Burnishing Path/Pad Diameter 2,000 RPM (pad on the floor) Non-Traction Drive 36V/234 Ah AGM Power Supply and Batteries Low Battery Protection Passive Dust Control 2.5 hp Pad Motor Pad Pressure: Self-Regulating up to 30 lb Sound Level: 68 dBA On-Board Charger: 36V, 25 A DC, 85-265 V Polishing Rate: Between 17,000 and 25,000 sf per hour No more than 615 total weight 53.5 x 23 x 42 (L x W x H) Easy to access dust bag Walk Behind Auto Scrubber Walk Behind, low profile, scrubber with an integrated squeegee Clean and dry while moving forwards and backwards 66 lbs of down pressure AGM Batter, 12 V Sound Level: 64 dBA At least 7,000 sq ft per hour productivity rate 14.5 Scrubbing Width 2.5 Gallon Solution/Recovery Tank Brush/Pad Diameter: 14.5 Brush Pressure: 60 Lb Machine Dimensions: 28 x 17 x 18.5 (L x W x H) Total Machine Weight: 176 Interested sources shall indicate that they are capable of providing the required supply/services and must provide the following: 1) Full name and address of the firm 2) Size status (i.e., small business, 8(a), HUBZone, Service Disabled Veteran Owned small business 3) Offer item(s) on schedule or open market 4) Capability statement 5) NAICS Code 6) If small business, can your company meet the requirements specified in FAR 52.219-14, limitations on Subcontracting. Additional, at time of quote company must be registered in SAM.gov and if not the manufacturer provide a authorized distributor/licenser letter from the manufacture. No other information is required at this time. The capability statements received from this market research are for planning purposes only and will assist the Government in planning its acquisition strategy. This is strictly market research, and the Government will not entertain questions concerning this market research. The Government will not assume any costs incurred by the contractor in the preparation of responses. All responses shall be submitted in writing no later than August 14th, at 12:00 PM EST to the attention of: [email protected] Please title the subject line for all responses as: Push-Behind Scrubbers: 36C246-24-AP-4430.

Bid Protests Not Available