Naval Construction Battalion Center, Gulfport, MS is soliciting for 12 line items consisting of warehouse equipment and storage units. All part numbers are Global Industrial equipment. All quotes are due to the Contracting Officer no later than July 12, 2006 @ 1600. This announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. This acquisition is 100% Set Aside for Small Business. The North American Industry Classification System code 423840, small business size standard is 500 employees. 01 MODULAR BAR STORAGE RACK: 7500 capacity load, easy set up, stacks up to 5 high, sturdy & lightweight, installations are expandable in width, height and length, heavy duty welded steel. Dimensions 26”W x 16”D x 23”H. MODEL #CR482620 QTY REQD: 3 EA 02 GAS CYLINDER RACK, VERTICAL: cylinder storage cabinet, vertical storage galvanized cabinet, constructed of heavy duty 8 gauge steel, 10 cylinder capacity, highly visible flammables warning sign, padlock hasp(lock not included), galvanized rust resistant finish stands up to harsh indoor and outdoor environments, exceeds OSHA 1910.110 and NFPA standard #58-79. Dimensions: 63”H X 30”W X 30’D. MODEL #CR900162 QTY REQD: 4EA 03 GAS CYLINDER RACK HORIZONTAL: cylinder storage cabinet, horizontal storage, galvanized cabinet, constructed of heavy duty 8 gauge steel, 8 cylinder capacity, highly visible flammables warning sign, padlock hasp (lock not included), galvanized rust resistant finish stands up to harsh indoor and outdoor environments, exceeds OSHA 1910.110 and NFPA standard #58-79. Dimensions: 63”H X 30”W X 30”D. MODEL #CR900160 QTY REQD: 1EA 04 HOSE STORAGE RACK: heavy duty hose reels, t-series, spring rewind reel with hose, heavy duty ¼” steel support post and mounting plate, full flow swivel joint, adjustable arm guide, position-locking ratchet, 300 PSI hose for air and water, limited 2 year warranty. Dimensions: 9” W X 23”D X 25”H. MODEL #CR854115 QTY REQD: 1EA 05 PARTS CABINET: open shelving with plastic drawers, easy to assemble, 36” wide steel shelving, hold 400 lbs per shelf, scratch- resistant gray baked enamel finish, 18” deep, includes 36 bins, 5- 9/16” X 4-5/8”: and 24 bins, 8- 3/8” X 4- 5/8”. Dimensions 36”W X 18”D X 75”H. MODEL #CR254918CO QTY REQD: 2EA 06 PALLET JACK: Rol-Lift deluxe pallet truck, heavy duty, steel construction, ergonomic handle, three position control, articulated axle, large 8” X 2” polyurethane steer wheels, 2- 9/10” load wheels, 220 degree steer arc, tapered 6”W reinforced and welded forks with integral pallet slides, durable powder coat finish, 6500 lb capacity, 7-1/2” raised height. Dimensions: 27”W X 48”L. MODEL # CR241402A QTY REQD: 1EA 07 SHELVING, HEAVY DUTY , WOOD DECK: Starter unit, 4 angle post, 4 sets of beams, 14 gauge steel uprights, 58” particle board, levels adjust on 1-1/2” increments, 1500 lb. Shelf capacity, assembly required. Dimensions: 36”W X 12”D X 84”H. MODEL# CR184018 QTY REQD: 5EA 08 SHELVING, HEAVY DUTY , WOOD DECK: Bulk storage shelving, wood deck, starter unit, 4 angle post, 4 sets of beams, 14 gauge steel uprights, 5/8” particle board, levels adjust on 1-1/2” increments, 1500lb. Shelf capacity, assembly required. Dimensions: 36”W X 18”D X 84”H. MODEL # CR184019 QTY REQD: 40 EA 09 SHELVING, HEAVY DUTY, WOOD DECK: Bulk storage shelving, wood deck, starter unit, 4 angle post, 4sets of beams, 14 gauge steel uprights, 5/8” particle board, levels adjust on 1-1/2” increments, 1500lb. Shelf capacity, assembly required. Dimensions: 36”W X 24”D X 84”H. MODEL # CR184020 QTY REQD: 11EA 10 TOOL CART W/VISE & FLOOR LOCK: Mobile heavy duty all welded service bench, semi-steel casters, with workshop vise, floor lock, 9 drawer section has (2) 21-1/2”W X 3-1/2”H, (2) 21-1/2”W 1-3/4”H, (4) 6-1/2”W X 1-3/4”H, (1) 6-1/2”W X 3-1/2”H drawers, central locking, cabinets 23”W X 25”D with (1) 11” and (1) 15” compartment, locking handle with optional floor lock and vise, top has 3”H back and end stops, 12” L vise shelf. MODEL #CR714128 QTY REQD: 24EA 11 TOOL CART W/VISE & FLOOR LOCK: Mobile heavy duty all welded service bench, semi-steel casters, with workshop vise, floor lock, 9 drawer section has (2) 21-1/2”W X 3-1/2”H, (2) 21-1/2”W 1-3/4”H, (4) 6-1/2”W X 1-3/4”H, (1) 6-1/2”W X 3-1/2”H drawers, central locking, cabinets 23”W X 25”D with (1) 11” and (1) 15” compartment, locking handle with optional floor lock and vise, top has 3”H back and end stops, 12” L vise shelf MODEL #CR714138 QTY REQD: 24 EA 12 TOOL CART W/VISE & FLOOR LOCK: Mobile heavy duty all welded service bench, semi-steel casters, with workshop vise, floor lock, 9 drawer section has (2) 21-1/2”W X 3-1/2”H, (2) 21-1/2”W 1-3/4”H, (4) 6-1/2”W X 1-3/4”H, (1) 6-1/2”W X 3-1/2”H drawers, central locking, cabinets 23”W X 25”D with (1) 11” and (1) 15” compartment, locking handle with optional floor lock and vise, top has 3”H back and end stops, 12” L vise shelf MODEL # CR714136 QTY REQD: 24EA Interested persons shall submit quotes to the Contracting Officer within fifteen (15) calendar days after the date of publication of this synopsis. All contractors that request a copy of this quotation MUST be registered in the Central Contractor Register (CCR). Further information may be obtained through the Internet at www.acq.osd.mil/ec/fags, or contact CCR Registration Assistance Center at 1-888-227-2423 and request the registration form and assistance packet for completion. The Internet site for registering in the CCR is http://www.ccr.gov. Information received as a result of this synopsis will be considered solely for the purpose of determining the best value for the Government. All questions concerning this announcement must be submitted in writing. Fax 228-871-2691. E-mail: [email protected]. No telephone requests will be accepted.

Bid Protests Not Available