Questions and answers Flight Chief Office 1. The drawing shows two mirrored, 60” U shaped desks and the list of furniture specified for this area calls for one 72” u shape desk and one 72” double pedestal desk. Aside from the numbers not matching, judging from the dimensions of the room, listed in the drawing, there is not enough room for these two desks in this one area. According to my information The line item is for a 60”X 30” desk shell and 71” hutch ( and other items) but with only two 71” hutches that leaves 20 inches to spare all items will fit. 2. The styles of these two desks are completely different as well. The U is a contemporary style and the double pedestal desk is a traditional which may be as intended? One company is not the same as another and you need to provide what is requested or don’t NCOIC Office The drawing again calls for two mirrored 60” U shaped desks but there are a couple of concerns with the products specified. 1. The product listing shows the rear portion of the 60” desks are specified with 71” credenzas (PL145) while the hutch is specified as PL125, which is a 48” hutch. Again Please look at all drawings of the room if you look at the 3D drawing you will see that the 71” credenzas is the bottom portion and the 48” is the top so both are required. 2. Another concern with a 60” desk and a 24” wide bridge. The bridge blocks off 24” of the desk and the drawer pedestal takes up 16” as well. This leaves an open area about 20” wide when you face forward. Rather small for the average person. Desks usually should be 66” wide with a 24” return. This is not so of the furniture requested As we have similar product all ready and the requested furniture is what we want 3. The drawing shows two of the Hon Lateral files but the product descriptions specified lists only one. This is incorrect! The first line in the description shows two each 774LB 700 series lateral files 30w 4 drawer w/top binder shelf. The only items listed as one each for this room is: the BBF Pedestal, mobile, and the end table. 4. Line item 4 in the product listing calls for PL102 at 60x30. The PL102 is specified as 66x30 by the supplier. My information shows it as the fifth line item and the part number I have is PL103 you should check your information The point of contact for this solicitation is Contract Specialist Wai President, (707) 424-7770, [email protected].

Bid Protests Not Available