This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

Purchase Request Number: W81K00-09-T-0369 is issued as a request for quotation (RFQ).

This purchase request document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-33.

This acquisition is being conducted as a commercial item acquisition in accordance with FAR Part 12. This requirement is Full and Open and all responsible sources may submit a quotation, which will be considered under NAICS code 339112 and the small business size standard is 500 employees. The requirements in this solicitation are:

CLINS 0001 1 LUMP SUM - Tibial Nail and Flexible Reamer set IAW parts list attached MFG Synthes OR Equal

Qty Description
1 9MM TI CANNULATED TIBIAL NAIL-EX/285MM-STERILE
1 9MM TI CANNULATED TIBIAL NAIL-EX/300MM-STERILE
1 9MM TI CANNULATED TIBIAL NAIL-EX/315MM-STERILE
1 9MM TI CANNULATED TIBIAL NAIL-EX/330MM-STERILE
1 9MM TI CANNULATED TIBIAL NAIL-EX/345MM-STERILE
1 9MM TI CANNULATED TIBIAL NAIL-EX/360MM-STERILE
1 9MM TI CANNULATED TIBIAL NAIL-EX/375MM-STERILE
1 9MM TI CANNULATED TIBIAL NAIL-EX/390MM-STERILE
1 9MM TI CANNULATED TIBIAL NAIL-EX/405MM-STERILE
1 9MM TI CANNULATED TIBIAL NAIL-EX/420MM-STERILE
1 10MM TI CANNULATED TIBIAL NAIL-EX/285MM-STERILE
1 10MM TI CANNULATED TIBIAL NAIL-EX/300MM-STERILE
1 10MM TI CANNULATED TIBIAL NAIL-EX/315MM-STERILE
1 10MM TI CANNULATED TIBIAL NAIL-EX/330MM-STERILE
1 10MM TI CANNULATED TIBIAL NAIL-EX/345MM-STERILE
1 10MM TI CANNULATED TIBIAL NAIL-EX/360MM-STERILE
1 10MM TI CANNULATED TIBIAL NAIL-EX/375MM-STERILE
1 10MM TI CANNULATED TIBIAL NAIL-EX/390MM-STERILE
1 10MM TI CANNULATED TIBIAL NAIL-EX/405MM-STERILE
1 10MM TI CANNULATED TIBIAL NAIL-EX/420MM-STERILE
1 11MM TI CANNULATED TIBIAL NAIL-EX/285MM-STERILE
1 11MM TI CANNULATED TIBIAL NAIL-EX/300MM-STERILE
1 11MM TI CANNULATED TIBIAL NAIL-EX/315MM-STERILE
1 11MM TI CANNULATED TIBIAL NAIL-EX/330MM-STERILE
1 11MM TI CANNULATED TIBIAL NAIL-EX/345MM-STERILE
1 11MM TI CANNULATED TIBIAL NAIL-EX/360MM-STERILE
1 11MM TI CANNULATED TIBIAL NAIL-EX/390MM-STERILE
1 11MM TI CANNULATED TIBIAL NAIL-EX/405MM-STERILE
1 11MM TI CANNULATED TIBIAL NAIL-EX/420MM-STERILE
1 12MM TI CANNULATED TIBIAL NAIL-EX/285MM-STERILE
1 12MM TI CANNULATED TIBIAL NAIL-EX/300MM-STERILE
1 12MM TI CANNULATED TIBIAL NAIL-EX/315MM-STERILE
1 12MM TI CANNULATED TIBIAL NAIL-EX/330MM-STERILE
1 12MM TI CANNULATED TIBIAL NAIL-EX/345MM-STERILE
1 12MM TI CANNULATED TIBIAL NAIL-EX/360MM-STERILE
1 12MM TI CANNULATED TIBIAL NAIL-EX/375MM-STERILE
1 12MM TI CANNULATED TIBIAL NAIL-EX/390MM-STERILE
1 12MM TI CANNULATED TIBIAL NAIL-EX/405MM-STERILE
1 12MM TI CANNULATED TIBIAL NAIL-EX/420MM-STERILE
1 SCREW FORCEPS
1 LOCKING SCREW RACK FOR TIBIAL NAIL-EX IMPLANTS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 26MM FOR IM NAILS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 28MM FOR IM NAILS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 30MM FOR IM NAILS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 32MM FOR IM NAILS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 34MM FOR IM NAILS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 36MM FOR IM NAILS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 38MM FOR IM NAILS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 40MM FOR IM NAILS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 42MM FOR IM NAILS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 44MM FOR IM NAILS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 46MM FOR IM NAILS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 48MM FOR IM NAILS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 50MM FOR IM NAILS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 52MM FOR IM NAILS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 54MM FOR IM NAILS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 56MM FOR IM NAILS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 58MM FOR IM NAILS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 60MM FOR IM NAILS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 62MM FOR IM NAILS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 64MM FOR IM NAILS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 66MM FOR IM NAILS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 68MM FOR IM NAILS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 70MM FOR IM NAILS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 72MM FOR IM NAILS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 74MM FOR IM NAILS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 76MM FOR IM NAILS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 78MM FOR IM NAILS
2 4.0MM TI LOCKING SCREW W/T25 STARDRIVE 80MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 26MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 28MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 30MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 32MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 34MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 36MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 38MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 40MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 42MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 44MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 46MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 48MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 50MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 52MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 54MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 56MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 58MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 60MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 62MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 64MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 66MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 68MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 70MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 72MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 74MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 76MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 78MM FOR IM NAILS
2 5.0MM TI LOCKING SCREW W/T25 STARDRIVE 80MM FOR IM NAILS
1 TI END CAP FOR TIBIAL NAILS-EX T40 STARDRIVE GRAY/0MM EXT
1 TI END CAP FOR TIBIAL NAILS-EX T40 STARDRIVE GRAY/5MM EXT
1 TI END CAP FOR TIBIAL NAILS-EX T40 STARDRIVE GRAY/10MM EXT
1 TI END CAP FOR TIBIAL NAILS-EX T40 STARDRIVE GRAY/15MM EXT
1 TIBIAL NAIL-EX INSTRUMENT SET
2 4.5MM PIN WRENCH 120MM
1 RATCHET WRENCH-11MM WIDTH ACROSS FLATS
1 EXTRACTION SCREW FOR TI FEMORAL AND TIBIAL NAILS
1 HAMMER GUIDE FOR SLIDE HAMMER
1 CANNULATED SHAFT WITH 8MM HEX 125MM
3 3.2MM GUIDE WIRE 400MM
1 COMPRESSION DEVICE FOR TI CANNULATED TIBIAL NAILS-EX
1 RADIOGRAPHIC RULER FOR TI CANNULATED TIBIAL NAILS
1 RADIOGRAPHIC CANAL WIDTH ESTIMATOR FOR IM NAILS
1 12.0MM PROTECTION SLEEVE
1 12.0MM CANNULATED DRILL BIT LARGE QC/190MM
1 12.0MM CANNULATED AWL
2 CANNULATED CONNECTING SCREW FOR STANDARD INSERTION HANDLE
1 STANDARD INSERTION HANDLE
1 DRIVING CAP WITH HANDLE ADAPTER
1 AIMING ARM FOR TI CANNULATED TIBIAL NAILS-EX
1 SLIDE/FIXED HAMMER 700 GRAMS
2 3.2MM THREE-FLUTED DRILL BIT QC/330MM/100MM CALIBRATION
2 4.2MM THREE-FLUTED DRILL BIT QC/330MM/100MM CALIBRATION
1 12.0MM/8.0MM PROTECTION SLEEVE 188MM
1 8.0MM/3.2MM DRILL SLEEVE 200MM
1 8.0MM/4.2MM DRILL SLEEVE 200MM
1 3.2MM TROCAR
1 4.2MM TROCAR 210MM
1 DEPTH GAUGE FOR LOCKING SCREWS TO 100MM FOR IM NAILS
1 BALL HEX SCREWDRIVER 8MM
1 REAMING ROD PUSH ROD WITH BALL HANDLE
2 3.2MM THREE-FLUTED DRILL BIT QC/NEEDLE POINT/145MM
2 4.2MM THREE-FLUTED DRILL BIT QC/NEEDLE POINT/145MM
1 DIRECT MEASURING DEVICE FOR LCKNG SCR TO 100MM F/IM NAILS
1 STARDRIVE SCREWDRIVER T25/SELF-RETAINING
1 CANNULATED STARDRIVE SCREWDRIVER T40/SELF-RETAINING
1 HOLDING SLEEVE WITH LOCKING DEVICE
1 GRAPHIC CASE FOR TIBIAL NAIL-EX INSTRUMENT SET
1 HOLDING DEVICE FOR GUIDE WIRES AND REAMING RODS
1 TIBIAL NAIL-EX INSERTION HANDLE
2 CANN CONNECTING SCR W/INTERNAL THRD F/SHRT INSERTN HANDLE
Qty Description
1 FLEXIBLE REAMERS FOR IM NAILS INSTRUMENT SET GRAPHIC CASE
1 REMOVAL TOOL
2 5.0MM FLEXIBLE SHAFT
1 7.0MM REDUCTION HEAD-STRAIGHT
1 7.0MM REDUCTION HEAD-ANGLED
1 8.5MM MEDULLARY REAMER HEAD
1 9.0MM MEDULLARY REAMER HEAD
1 9.5MM MEDULLARY REAMER HEAD
1 10.0MM MEDULLARY REAMER HEAD
1 10.5MM MEDULLARY REAMER HEAD
1 11.0MM MEDULLARY REAMER HEAD
1 11.5MM MEDULLARY REAMER HEAD
1 12.0MM MEDULLARY REAMER HEAD
1 12.5MM MEDULLARY REAMER HEAD
1 13.0MM MEDULLARY REAMER HEAD
1 13.5MM MEDULLARY REAMER HEAD
1 14.0MM MEDULLARY REAMER HEAD
1 14.5MM MEDULLARY REAMER HEAD
1 15.0MM MEDULLARY REAMER HEAD
1 15.5MM MEDULLARY REAMER HEAD
1 16.0MM MEDULLARY REAMER HEAD
1 16.5MM MEDULLARY REAMER HEAD
1 17.0MM MEDULLARY REAMER HEAD
1 17.5MM MEDULLARY REAMER HEAD
1 18.0MM MEDULLARY REAMER HEAD
1 18.5MM MEDULLARY REAMER HEAD
1 19.0MM MEDULLARY REAMER HEAD
1 FLEXIBLE SHAFT HANDLE WITH QUICK COUPLING
1 3.6MM CLEANING BRUSH
1 HOLDING FORCEPS
1 DEPTH GAUGE
1 DEPTH GAUGE EXTENSION TUBE
1 MEDULLARY TUBE
1 TISSUE PROTECTOR
1 6.0MM HAND REAMER 450MM
1 7.0MM HAND REAMER 450MM
1 8.0MM HAND REAMER 450MM
1 UNIVERSAL CHUCK WITH T-HANDLE
5 2.5MM REAMING ROD WITH BALL TIP/950MM-STERILE
1 6.0MM FLEXIBLE MEDULLARY REAMER/FLAT WIRE/385MM
1 6.5MM FLEXIBLE MEDULLARY REAMER/FLAT WIRE/385MM
1 7.0MM FLEXIBLE MEDULLARY REAMER/FLAT WIRE/385MM
1 7.5MM FLEXIBLE MEDULLARY REAMER/FLAT WIRE/385MM
1 8.0MM FLEXIBLE MEDULLARY REAMER/FLAT WIRE/385MM

ALL ITEMS SUBMITTED AS OR EQUAL MUST MEET THE FOLLOWING CHARACTERISTICS:

Universal Design for use in left and right tibia
Diameters offered from 8mm-13mm
Allow fixation of proximal third, shaft and distal third fractures
Smooth transitional bend to ease the insertion of the nail and provide an anatomical fit
Active compression locking option
5.0mm dual core locking screws have a tapered core which allows unicortical use in the tibial plateau and provides purchase in cancellous bone
Must be compatible with Synthes trauma sets
24/7 local representation on call for training and assist in surgical procedures



For US ARMY MEDDAC, Fort Polk, LA 71459. Vendors shall comply with FAR Clauses (and other clauses throughout this solicitation) can be viewed by accessing website http://farsite.hill.af.mil/

FAR provision 52.212-1 [Instructions to Offerors Commercial] applies to this acquisition to include the following addenda: All offerors are cautioned that if selected for award, they must be registered with the Central Contractor Registration (CCR) program. The CCR can be accessed via the internet at www.ccr.gov/ . Confirmation of CCR registration will be validated prior to awarding a contract.

Clause 52.212-3 with their offer. The provision can be downloaded by accessing the website listed in this solicitation.

FAR clause 52.212-4 [Contract Terms and Conditions Commercial Items] applies to this acquisition to include the following addenda:

Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003 Electronic Submission of Payment Requests.

252.212-7000 Offeror Representations and Certifications--Commercial Items.

FAR Clause 52.212-5 [Contract Terms and Conditions Required to Implement Statutes or Executive Orders Commercial Items];

52.212-28 Post Award Small Business Program Rerepresentation (june 2007) (15 U.S.C. 632 (a)(2);

52.222-3 [Convict Labor];

52.222-19 [Child Labor Cooperation with Authorities and Remedies];

52.222-21 [Prohibition of Segregated Facilities]

52.222-26 [Equal Opportunity];

52.222-35 [Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans];

52.222-36 [Affirmative Action for Workers with Disabilities];

52.232-37 Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era and other Eligible Veterans (DEC 2001) (38 U.S.C. 4212).;

52.232-33 [Payment by Electronic Funds Transfer Central Contractor Registration]

52.212-3 ALT I -- Offeror Representations and Certifications -- Commercial Items

52.211-6 [Brand Name Or Equal];


Wide Area Work Flow (WAWF)-RA is the preferred method to electronically process vendor request for payment. This application allows DOD vendors to submit and track Invoices and Receipt/Acceptance documents electronically. Contractor selecting to use shall register to use WAWF-RA at https://wawf.eb.mil The closing date and time of this solicitation is 14 AUG, 11:00 A.M/CST. Price quotes shall be submitted on company letterhead and signed by a company representative. Email quotes to [email protected] . Paper copies of this solicitation will not be issued and telephone requests or FAX requests for the solicitation will not be accepted. Point of contact for this solicitation: Raul Garcia, phone (210) 221-5187; e-mail [email protected]

Bid Protests Not Available