This is a combined synopsis/solicitation prepared in accordance with FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are not being requested and a written solicitation will not be issued. The U.S. Naval Hospital, Okinawa, Japan intends to negotiate a sole-source contract with SYNTHES for various surgical implants to fill the exsisting sets. However, any firm that believes it can meet the requirements may give written notification to the Point of Contact (POC). Offerors responding to this notice must be FDA approved for the manufacture, sale and distribution of these Synthes products. Offerors must be authorized distributors of Synthes products. Contractor must be registered in Central Contractor Registration. [Note: Lack of registration in the Central Contractor Registration will make a Contractor ineligible for award] Registration is available via the Internet at www.ccr.gov. Shipping shall be direct to U.S. Naval Hospital, Okinawa, Japan. The requirements includes the following schedule of supplies:497.78 32EA SCREW TI 1.8MM LOCKING 497.798 6EA TI LOW P TRANSCONNECTOR 42MM 404.012 8EA CORTEX BONE SCREW / SMALL-TITA 404.016 8EA CORTEX BONE SCREW / SMALL-TITA 206.016 10EA 4.0MMX16 CANCELLOUS SCREW/FULL 319.04 2EA DEPTH GUAGE 2.7-3.5MM 310.67 5EA BIT CANNULATED 2.7 160 X 130 242.33 5EA 2.7MM L-PLATES OBLIQUE LEFT 34 292.120 20PK KIRSCHNER WIRE 1.25MM X150MM 204.812 10EA 3.5MM CORTEX SCREW 12MM SELF-T 204.814 20EA 3.5MM CORTEX SCREW 14MM SELF-T 204.816 10EA 3.5MM CORTEX SCREW 16MM SELF-T 204.818 10EA 3.5MM CORTEX SCREW 18MM SELF-T 204.822 10EA 3.5MM CORTEX SCREW 22MM SELF-T 204.824 10EA 3.5MM CORTEX SCREW 24MM SELF-T 204.826 10EA 3.5MM CORTEX SCREW 26MM SELF-T 245.101 3EA 3.5MM LCP RECON PLATE 10H 140M 245.121 3EA 3.5MM LCP RECON PLATE 12H 168M 241.421 3EA LCP 1-3 TUBE PLATE W 12H 141MM 223.551 5EA 3.5MM LCP PLATE 5 HOLES 72MM 223.591 5EA 3.5MM LCP PLATE 9 HOLES 124MM 212.101 10EA 3.5MM LOCK SCREW SLF-TPNG 10MM 212.124 5EA 3.5MM LOCK SCREW SLF-TPNG 60MM 212.107 10EA 3.5MM LOCK SCREW SLF-TPNG 22MM 212.109 10EA 3.5MM LOCK SCREW SLF-TPNG 26MM 212.111 5EA 3.5MM LOCK SCREW SLF-TPNG 30MM 212.112 5EA 3.5MM LOCK SCREW SLF-TPNG 32MM 212.113 5EA 3.5MM LOCK SCREW SLF-TPNG 34MM 212.116 10EA 3.5MM LOCK SCREW SLF-TPNG 38MM 212.102 10EA 3.5MM LOCK SCREW SLF-TPNG 12MM 212.103 10EA 3.5MM LOCK SCREW SLF-TPNG 14MM 212.104 10EA 3.5MM LOCK SCREW SLF-TPNG 16MM 212.105 10EA 3.5MM LOCK SCREW SLF-TPNG 18MM 212.106 10EA 3.5MM LOCK SCREW SLF-TPNG 20MM 212.108 10EA 3.5MM LOCK SCREW SLF-TPNG 24MM 212.110 10EA 3.5MM LOCK SCREW SLF-TPNG 28MM 223.561 5EA 3.5MM LCP PLATE 6 HOLES 85MM 223.581 5EA 3.5MM LCP PLATE 8 HOLES 111MM 212.117 5EA 3.5MM LOCK SCREW SLF-TPNG 40MM 212.119 5EA 3.5MM LOCK SCREW SLF-TPNG 45MM 212.121 5EA 3.5MM LOCK SCREW SLF-TPNG 50MM 212.123 5EA 3.5MM LOCK SCREW SLF-TPNG 55MM 241.371 3EA LCP 1-3 TUBE PLATE W 7H 81MM 241.381 3EA LCP 1-3 TUBE PLATE W 8H 93MM 241.361 3EA LCP 1-3 TUBE PLATE W 6H 69MM 498.150 10EA 6.0MM TI SOFT ROD 50MM ST 450.135 20EA 4.0MM TI CANC SCREW S-TAP 14MM 202.010 10EA SCREW CORTEX 2.7 MM LENGTH 202.012 10EA SCREW CORTEX 2.7 MM LENGTH 314.29 2EA SCREW DRIVER CANNULATED 2.5MM 294.43 5EA 4.0 MM SCHANZ SCREW 60MM 294.44 5EA 4.0MM SCHANZ SCREW SPADE 80MM 294.52 10EA 5.0MM SCHANZ SCREW BL 100MM 294.53 10EA SCHANZ SCREW 5MMX125MM 294.54 10EA 5.0MM SCHANZ SCREW BL 150MM 294.55 10EA 5.0MM SCHANZ SCREW BL 170MM 294.56 10EA 5MM SHANZ SCREW 200MM BLUNT TR 294.57 5EA SCHANZ SCREW 5.0MM 250MM 294.72 5EA 4.5MM SCHANZ SCREW BL 100MM 294.73 5EA SCHANZ SCREW ST 4.5MMX125MM 294.76 5EA 4.5MM SHANZ SCREW 200 MM BLUNT 393.43 5EA SPRING-LOADED NUT 393.64 10EA ADJUSTABLE CLAMP 393.66 5EA TRANSVERSE CLAMP 393.69 5EA OPEN CLAMP The following provisions and clauses apply plus any addenda: FAR 52.212-1 Instructions to Offerors - Commercial Items; 52.212-2 Evaluation - Commercial Items; 52.212-3 Offeror Representations and Certifications --Commercial Items; 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders- Commercial Items and 52.212-4 Contract Terms and Conditions - Commercial Items. NAICS Code for this requirement is 339113.The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. 1) Past performance 2) Technical capability 3) Price. Past performance and technical capability when combined has more importance than price. Responses must be submitted to the POC no later than February 05, 2008; 12 PM; Japan Standard Time. Responses shall be submitted via e-mail in Word, Excel, or PDF format to the POC, Hiro Oshiro, at [email protected] or faxed to 011-81-989-93-5754. Telephone inquiries or requests will not be accepted. Responses received will be evaluated; however, a determination by the Government not to compete the proposed procurement based upon responses to this notice is solely within the discretion of the Government. If no responses are received, U.S. Naval Hospital, Okinawa, Japan will proceed with the sole source procurement.

Bid Protests Not Available