Federal Bid

Last Updated on 05 Oct 2011 at 8 AM
Special Notice
Location Unknown

65--Notice of Intent to Sole Source ALCON Ophthalmic Lenses

Solicitation ID W81K0011T0161
Posted Date 07 Jul 2011 at 5 PM
Archive Date 05 Oct 2011 at 5 AM
NAICS Category
Product Service Code
Set Aside No Set-Aside Used
Contracting Office Regional Health Contract Off Central
Agency Department Of Defense
Location United states
Point Of Contact Not Available
Notice of Intent to Sole Source Contract

The Southern Region Contracting Office - West (Provisional), on or about, 10 August 2011 intends to issue a sole source purchase order on a consignment basis to ALCON Laboratories for the purchase of ALCON Ophthalmic Lenses. These lenses will provide the operating room the mission capability to function at a high capacity achieve the best possible patient care for Reynolds Army Hospital (RACH), Ft. Sill, OK.

This notice is neither a request for quotes nor a solicitation of offers; however, all responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency.

Salient Characteristics:

Lens type #1: Alcon SN60WF
: +6 through +30 diopter
: Replacement of human crystalline lens for correction of Aphakia in adults
: Acrysof IQ UV and blue light filtering chromophore
: Aspheric Lens Surface
: Biconvex optic with supporting haptics
: Posterior aspheric surface must be designed with negative spherical aberration to compensate for positive spherical aberration of average corneas.
: High refractive index soft acrylic material
: Foldable lens allowing smaller incision smaller than optic diameter.
: Toric Posterior Chamber Intraocular lens (IOL)
: Single Piece design
Optic Type: Anterior Asymmetric Biconvex optic type.
Optic Diameter: 6.0mm.
Overall length: 13.0mm.
Haptic Angle: 0 degrees.
Blue light wavelength range: 400-475nm.
Material: Ultraviolet and blue light filtering Acrylate/Methacrylate Copolymer.
Index of Refraction: 1.55.
Configuration: Anterior Asymmetric Biconvex.
Configuration: STABLEFORCE Modified-L.
Power: +6.0 through +30 D.
Reduction of blue light wave lengths from 62% at 400nm to 23" at 475nm.

Lens Type #2: Alcon SN6ATT - Lens to include: SN6AT3, SN6AT4, and SN6AT5 +6 through +30 diopter
: Posterior chamber lens needed for the correction of Astigmatism
: Acrysof IQ Toric Posterior Chimer Intraocular Lens (IOL)
: Sterile UV and Blue light filtering Chromophore
: Biconvex tonic aspheric optic
: High refractive index soft acrylic material
: Anterior surface Acrysof IQ tonic IOL aspheric surface must be designed with negative spherical aberration identical to Aspheric Acrysof IQ IOL SN60WF model compensate for positive spherical aberration of cornea.
: Foldable lens allowing smaller incision smaller than optic diameter.
: Toric Posterior Chamber Intraocular lens (IOL)
: Single piece design
Power: +6 through +30 D.
Optic Type: Biconvex Toric Aspheric Optic
Optic Diameter: 6.0mm
Overall length: 13.0 mm
Haptic Angle: 0 degrees
Haptic Configuration: STABLEFORCE
Blue light wavelength range: 400-475nm wavelength range
Optic Haptic Material: Ultraviolet and blue light filtering Acrylate/Methacrylate Copolymer UV cutoff at 10% T: 402nm
Index of refraction: 1.55


Lens Type #3: Alcon Kerman / Multiplex III MTA4UO +6.0 through 30.0 diopter
Alcon Anterior chamber lens designed to position anterior of iris to replace
natural crystalline lens of eye.
: Single Piece Anterior Chamber lens
: Sterile UV-Absorbing PMMA
: Intraocular Lens
: lens used for primary or secondary implantation after cataract placement.
: lens used commonly for secondary aphakic surgery patient (MTAU).

OPTIC-
Power: +6 through 30.0
Optic Configuration: Convexoplano
Material: Polymethylmethacrylate (PMMA) UV- Absorbing
Color: Clear
UV cutoff at 10%: 380nm (+5.0 diopter lens)
: 386nm (+30.0 diopter lens)
Specific Gravity: 1.19
Index of Refraction: 1.49
Anterior Chamber diameter: 12.0-12.4
Lens Size Diameter: 13.0mm
Corresponding Model designation: MTA4UO
Physical : MULTIFLEX III

Lens Type #4: Alcon MN60AC / Multipiece Posterior chamber lens +6.0 through +30.0
: Sterile Acrysof Natural UV / blue light filtering / UV Absorbing
: Acrylic foldable
: Multipiece IOL
: Posterior Chamber lens
: Optical implant
: Designed to replace crystalline lens for correction of aphakia in adults.
: Acrysof Natural IOL
: Blue filtering Chromophore
: Must consist of High refractive index soft acrylic material
:Must filter light in the 400-475nm wavelength range.
: reduces trasmittance of blue light wavelengths from 71% at 400nm to 22% at 475nm.
OPTIC-
Power: +6.0 through +30.0 diopter
Optic Type: A
Configuration: Anterior asymmetric biconvex
Index of Refraction: 1.55
Material: Ultraviolet and blue light absorbing Acrylate/ Methacrylate Copolymer
Haptics-
Material: PMMA (MONOFLEX)
Configuration: Modified-C
Color: Blue
Optic Diameter: 6.0mm
Optic Overall length: 13.0
Haptic Angle: 10 degrees
Model: MN60AC

Lens Type #5: Acrysof IQ ReStor SN6AD1 IOL Apodized Diffractive Posterior Chamber Intraocular lens (IOL)

: Optical portion consists of High refractive index material w/blue light filtering
chromophore, filtering light similar to human crystalline lens.
: Filters light in the 400-475 nm blue light wavelength range.
: Optical portion is symmetric, biconvex and consist of soft acrylic material for folding prior to insertion of lens, to allow for smaller incisions.
: Lens unfolds after insertion.
: Designed with Negative spherical aberration for function (compensation) for positive spherical aberration of the cornea.
: Anterior Aspheric Diffractive Surface
: Sterile UV and Blue Light Filtering Acrylic Fodable.
Optic Type: Apodized Diffractive Aspheric
Optics material: Ultraviolet and blue light filtering Acrylate/Methacrylate Copolymer
Optic Powers: +6.0 through +30.0
Index of Refraction: 1.55
Haptic Configuration: STABLEFORCE
Haptic Color: Yellow
Optic Diameter (mm): 6.0
Overal Length (mm): 13.0
Haptic Angle: 0 degrees
INTERESTED PARTIES NEED TO RESPOND TO THIS NOTICE ON OR BEFORE 17 JULY 2011, 1:00 P.M. (CST)

Place of Performance:
Reynolds Army Hospital (RACH), Ft. Sill, OK

Place od Performance
1 Oct 2011- 30 Sep 2012 plus three option years.

Point(s) of Contact:

Therese Newbauer, Contract Specialist
Phone: (210) 221-4820
E-mail: [email protected]

Gloria Moreno, Contracting Officer
Phone: (210) 221-4752
E-mail: [email protected]

Contracting Office Address:
Great Plains Regional Contracting Office
ATTN: MCAA GP L31 9V
3851 Roger Brooke Dr.
Fort Sam Houston TX 78234-6200
Bid Protests Not Available

Similar Past Bids

Hines Illinois 17 Sep 2009 at 4 PM
Location Unknown 11 Aug 2011 at 5 PM
Location Unknown 13 Nov 2017 at 6 PM
Evans West virginia 28 Sep 2017 at 9 PM
Location Unknown 10 Sep 2018 at 12 PM