This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This solicitation RFQ-VA-251-14-Q-0221 is issued as a request for quote (RFQ) and is a set-aside for small business under NAICS code 339112 (500 employees). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-12. No telephone requests will be accepted. Only written or email requests received directly from the requester are acceptable. Contractor shall provide the following line items to the Richard L. Roudebush VAMC, 1481 West Tenth Street, Indianapolis, IN 46202. FOB Destination: QTY: 1 AMD/ECAT Item: 999066692 MNF Item: 03.010.093 Description: REAMING ROD PUSH ROD WITH BALL HANDLE UM: EA 2 999066701 03.010.104 4.2MM THREE-FLUTED DRILL BIT QC/NEEDLE POINT/145MM EA 1 999066706 03.010.107 STARDRIVE SCREWDRIVER T25/SELF-RETAINING EA 1 999066709 03.010.110 CANNULATED STARDRIVE SCREWDRIVER T40/SELF-RETAINING EA 1 999072232 321.20 RATCHET WRENCH-11MM WIDTH ACROSS FLATS EA 1 999072712 357.22 HAMMER GUIDE FOR SLIDE HAMMER EA 1 999076572 69.004.300 GRAPHIC CASE FOR TIBIAL NAIL-EX INSTRUMENT SET EA 1 999066624 03.010.015 COMPRESSION DEVICE FOR TI CANNULATED TIBIAL NAILS-EX EA 1 999066629 03.010.023 RADIOGRAPHIC CANAL WIDTH ESTIMATOR FOR IM NAILS EA 1 999066638 03.010.035 12.0MM PROTECTION SLEEVE EA 1 999066643 03.010.040 12.0MM CANNULATED AWL EA 1 999066646 03.010.045 STANDARD INSERTION HANDLE EA 1 999066653 03.010.052 AIMING ARM FOR TI CANNULATED TIBIAL NAILS-EX EA 2 999066660 03.010.060 3.2MM THREE-FLUTED DRILL BIT QC/330MM/100MM CALIBRATION EA 1 999066627 03.010.021 RADIOGRAPHIC RULER FOR TI CANNULATED TIBIAL NAILS EA 1 999066630 03.010.024 HOLDING DEVICE FOR GUIDE WIRES AND REAMING RODS EA 1 999066639 03.010.036 12.0MM CANNULATED DRILL BIT LARGE QC/190MM EA 1 999066645 03.010.044 CANNULATED CONNECTING SCREW FOR STANDARD INSERTION EA 1 999066648 03.010.047 DRIVING CAP WITH HANDLE ADAPTER EA 1 999066657 03.010.056 SLIDE/FIXED HAMMER 700 GRAMS EA 1 999066666 03.010.063 12.0MM/8.0MM PROTECTION SLEEVE 188MM EA 1 999066668 03.010.065 8.0MM/4.2MM DRILL SLEEVE 200MM EA 1 999066671 03.010.070 4.2MM TROCAR 210MM EA 1 999066691 03.010.092 BALL HEX SCREWDRIVER 8MM EA 2 999066699 03.010.103 3.2MM THREE-FLUTED DRILL BIT QC/NEEDLE POINT/145MM EA 1 999066705 03.010.106 DIRECT MEASURING DEVICE FOR LCKNG SCR TO 100MM F/IM NAILS EA 2 999072230 321.17 4.5MM PIN WRENCH 120MM EA 1 999072709 357.133 EXTRACTION SCREW FOR TI FEMORAL AND TIBIAL NAILS EA 1 999072744 357.398 CANNULATED SHAFT WITH 8MM HEX 125MM EA 2 999066662 03.010.061 4.2MM THREE-FLUTED DRILL BIT QC/330MM/100MM CALIBRATION EA 1 999066667 03.010.064 8.0MM/3.2MM DRILL SLEEVE 200MM EA 1 999066670 03.010.069 3.2MM TROCAR EA 1 999066673 03.010.072 DEPTH GAUGE FOR LOCKING SCREWS TO 100MM FOR IM NAILS EA 1 999149813 03.111.005 DEPTH GAUGE FOR 2.0MM/2.4MM AND 2.7MM SCREWS EA 1 999149811 03.110.023 1.8MM VARIABLE ANGLE LOCKING DRILL GUIDE/CONE EA 1 999149812 03.110.024 1.8MM VARIABLE ANGLE LOCKING DRILL GUIDE/COAXIAL EA 1 999202687 61.116.001 GRAPHIC CASE/FULL LENGTH 4 BAY/F/MODULAR GC SYSTEM EA 1 999202826 61.111.471 2/3 INSTR TRAY FOR LCP AND VA-LCP DISTAL RADIUS SYSTEMS EA 1 999202918 61.111.472 1/3 INSTR TRAY FOR DSTL RADIUS FORCEPS AND BENDING PLIERS EA 1 999202870 61.111.473 1/3 INSTR TRAY FOR DSTL RAD RETRACTORS/HOOK/ELEVATORS EA 2 999071859 310.19 2.0MM DRILL BIT/QC/100MM EA 2 999071879 310.26 2.7MM DRILL BIT/QC/100MM EA 2 999071918 310.509 1.8MM DRILL BIT WITH DEPTH MARK/QC/110MM EA 2 999121637 310.530 2.4MM DRILL BIT/QC/100MM EA 1 999114255 03.110.007 STARDRIVE SCREWDRIVER T8 EA 1 999121641 311.43 HANDLE WITH QUICK COUPLING, SMALL EA 1 999072086 314.467 STARDRIVE SCREWDRIVER SHAFT T8 105MM EA 1 999114875 314.453 STARDRIVE SCREWDRIVER SHAFT T8 55MM EA 1 999072087 314.468 HOLDING SLEEVE FOR STARDRIVE SCREWDRIVER SHAFT T8 EA 1 999072213 319.39 SHARP HOOK EA 2 999072244 323.029 THREADED LCP(TM) DRILL GUIDE F/LCP(TM) DISTAL RADIUS PLATES EA 1 999087528 03.110.000 1.8MM UNIVERSAL VARIABLE ANGLE LOCKING DRILL GUIDE EA 1 999072256 323.202 2.4MM UNIVERSAL DRILL GUIDE EA 1 999072257 323.26 2.7MM UNIVERSAL DRILL GUIDE EA 1 999072282 324.084 1.25MM K-WIRE INSERT EA 2 999072344 329.12 BENDING PLIERS-SMOOTH JAWS FOR MINI PLATES EA 2 999072380 329.922 BENDING PIN FOR 2.4MM LOCKING PLATES EA 1 999023249 398.41 REDUCTION FORCEPS WITH POINTS BROAD-RATCHET EA 1 999073232 398.95 TERMITE FORCEPS 90MM EA 1 999073304 399.48 PERIOSTEAL ELEVATOR 3MM CURVED BLADE-STRAIGHT EDGE EA 1 999073306 399.481 PERIOSTEAL ELEVATOR 3MM CURVED BLADE - ROUND EDGE EA 1 999073332 399.97 REDUCTION FORCEPS WITH POINTS RATCHET 130MM EA 2 999114262 03.110.021 1.8MM DRILL GUIDE WITH MEASURING FOR GUIDE BLOCK EA 1 999087530 03.110.005 HANDLE FOR TORQUE LIMITING ATTACHMENT EA 1 999076297 511.776 TORQUE LIMITING ATTACHMENT 0.8NM/QUICK COUPLING EA 1 999202737 61.111.469 SCREW RACK FOR 2.4MM VA-LCP DSTL RADIUS SYS GRAPHIC CASE EA 1 999141750 03.111.500 GUIDE BLOCK FOR TWO-COLUMN PLATE/NARROW 6H HD/RT EA 1 999141751 03.111.501 GUIDE BLOCK FOR TWO-COLUMN PLATE/NARROW 6H HD/LT EA 1 999142161 60.111.465 MODULE FOR VA-LCP 2-COLUMN VOLAR DSTL RADIUS PL/NARROW EA 1 999117805 03.111.600 GUIDE BLOCK FOR 2 COLUMN PLATE 6 HOLE HEAD/RIGHT EA 1 999117806 03.111.601 GUIDE BLOCK FOR 2 COLUMN PLATE 6 HOLE HEAD/LEFT EA 1 999117807 03.111.700 GUIDE BLOCK FOR 2 COLUMN PLATE 7 HOLE HEAD/RIGHT EA 1 999117808 03.111.701 GUIDE BLOCK FOR 2 COLUMN PLATE 7 HOLE HEAD/LEFT EA 1 999114923 60.111.461 MODULE F/VA-LCP 2-COLUMN VOLAR DISTAL RADIUS PLATE EA 1 999150497 60.111.467 MODULE FOR VA-LCP VOLAR EXTRA-ARTICLR DSTL RADIUS PL EA 1 999073272 399.18 SMALL HOHMANN RETRACTOR 6MM SHORT NARROW TIP 160MM EA 1 999073274 399.19 SMALL HOHMANN RETRACTOR 8MM SHORT NARROW TIP 160MM EA 4 999150542 60.116.054 MODULE ADAPTERS FOR 1 HIGH MODULES/F/MODULAR GC SYS EA 1 999150506 60.111.476 MODULE FOR 2.4MM VA-LCP DORSAL DISTAL RADIUS PLATES EA 1 999072756 357.412 CANNULATED REVERSE AWL EA 1 999072874 360.255 REAMING ROD MEASURING DEVICE EA 1 999076617 690.339 TI TROCHANTERIC FIXATION NAIL INSERTION SET GRAPHIC CASE EA 1 999066064 393.10 UNIVERSAL CHUCK WITH T-HANDLE EA 1 999072234 321.25 SPANNER WRENCH EA 1 999072712 357.22 HAMMER GUIDE FOR SLIDE HAMMER EA 1 999072232 321.20 RATCHET WRENCH-11MM WIDTH ACROSS FLATS EA 1 999072737 357.391 RADIOGRAPHIC RULER F/TROCHANTERIC FIXATION NAILS EA 1 999072739 357.393 3.2MM TROCAR 172MM EA 1 999072741 357.395 DRIVING CAP FOR 357.411 EA 1 999072744 357.398 CANNULATED SHAFT WITH 8MM HEX 125MM EA 1 999072755 357.411 INSERTION HANDLE F/TROCHANTERIC FIXATION NAILS EA 1 999072765 357.515 BALL HEX SCREWDRIVER 8MM FOR TI FEMORAL NAILS EA 1 999073301 399.42 HAMMER 500 GRAMS EA 1 999072499 351.05 TISSUE PROTECTOR EA 1 999072715 357.25 SLIDE HAMMER FOR HAMMER GUIDE EA 1 999072738 357.392 17.0MM/3.2MM WIRE GUIDE 161MM EA 1 999072740 357.394 17.0MM CANNULATED DRILL BIT LARGE QC/300MM EA 2 999072743 357.397 CANNULATED CONNECTING SCREW F/TROCHANTERIC FIXATION NAILS EA 1 999072754 357.410 22.0MM/17.0MM PROTECTION SLEEVE EA 1 999025302 314.11 HOLDING SLEEVE EA 1 999072782 357.92 MISS-A-NAIL AIMING JIG EA 1 999066722 03.010.150 STAR/HEXDRIVE SCREWDRIVER T25 3.5MM HEX/SELF-RETAINING EA 1 999071893 310.31 3.2MM DRILL BIT/QC/145MM EA 1 999071954 310.99 COUNTERSINK FOR 4.5MM CORTEX SCREWS EA 5 999072286 324.174 2.5MM WIRE GUIDE FOR 5.0MM SCREWS EA 1 999073164 397.706 HANDLE FOR AO REAMING COUPLER CONNECTION EA 1 999122118 310.44 4.5MM DRILL BIT/QC/145MM EA 1 999023273 323.46 4.5MM UNIVERSAL DRILL GUIDE EA 1 999025303 312.48 4.5MM/3.2MM INSERT DRILL SLEEVE EA 2 999071966 311.449 PUSH-PULL REDUCTION DEVICE FOR 4.5MM LCP® PLATES EA 4 999071996 312.449 4.3MM THREADED DRILL GUIDE EA 1 999072224 321.12 ARTICULATED TENSION DEVICE WITH GAUGE-SPAN 20MM EA 1 999072241 323.021 DIRECT MEASURING DEVICE FOR 5.0MM LOCKING SCREWS EA 1 999023137 311.44 T-HANDLE WITH QUICK COUPLING EA 1 999025302 314.11 HOLDING SLEEVE EA 2 999071967 311.46 TAP FOR 4.5MM CORTEX/SHAFT SCREWS 130MM/57MM TAP DEPTH EA 1 999072213 319.39 SHARP HOOK EA Offorers must comply with all instructions contained in provision 52.212-1, Instructions to Offerors-Commercial, applies to this acquisition. The following additional provisions and clauses apply: 52.212-2, Evaluation-Commercial Item, the Government will award a purchase order resulting from this solicitation to the responsible offerors whose offer conforming to the solicitation will be most advantageous to the government, price and other factors considered. Price will be evaluated to determine its fairness, completeness, and reasonableness as it relates to the offer. 52.212-3, Offeror Representations and Certifications-Commercial Items, a completed copy of this provision shall be submitted with the offer unless ORCA registered which must be noted in quotation. 52.212-4, Contract Terms and Conditions-Commercial Items. 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items, to include clauses: 4,7, 25, 27, 36, 37, 46, 48. The following additional clauses apply: SAM Clause: Attention: You must be registered in SAM to be considered for award. FAR 52.204-7, Central Contractor Registration (Oct 2003) (B)(2) the offeror shall provide its DUNS or, if applicable, its DUNS+4 number with its offer, which will be used by the contracting officer to verify that the offeror is registered in the SAM database. (C) Lack of registration in the SAM database will make an offeror ineligible for award. Offerors and contractors may obtain information on registration and annual confirmation requirements by calling 1-866-606-8220 or via the Internet at https://www.SAM.gov. Electronic Funds: FAR 52.252-2, Clauses Incorporated by References (Feb 1998). This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. 852.232-72, Electronic Submission of Payment Requests, 852.270-4, Commercial Advertising. Upon request, the contracting officer will make their full text available. Offers are to be received via email to [email protected] or at the VA NCO 11 Contracting Office, 8888 Keystone Crossing, Suite 1100, Indianapolis, IN 46202, ATTN: Kelly Poole no later than 2:00 P.M. eastern standard time on 24 March 2014. Contact Kelly Poole, Contract Specialist, [email protected].

Bid Protests Not Available