This combined synopsis/solicitation VA-248-14-Q-1391, for commercial items has been prepared in accordance with the format in FAR subpart 12.6 as supplemented with additional information included in this notice. This notice constitutes the only solicitation that will be issued. A quotation in response to this notice must be received no later than 2:00 pm EST Tuesday July 14, 2014. The solicitation number, VA248-14-Q-1391, is issued as a Request for Quote (RFQ). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-056. No telephone requests will be accepted. Only written requests received directly from the requester are acceptable. It is the Offerors responsibility to ensure that the quote is received. The applicable North American Industry Classification System Code (NAICS) is 339112, Surgical and Medical Instrument Manufacturing; the size standard is 500 employees. OFFERORS MUST STATE THEIR BUSINESS SIZE when submitting their offer. This procurement is being set aside for Small-Business Matrix Combo Plating Instrument System CLIN 01 03.503.072 MATRIXMANDIBLE/THORAX SCRWDRVR BLADE SELF RETAINING-LONG 5 EA CLIN 02 03.503.404 MATRIXMANDIBLE 1.5MM DRILL BIT J-LATCH W/4MM STOP/50MM 5 EA CLIN 03 03.503.406 MATRIXMANDIBLE 1.5MM DRILL BIT J-LATCH W/6MM STOP/50MM 5 EA CLIN 04 03.503.408 MATRIXMANDIBLE 1.5MM DRILL BIT J-LATCH W/8MM STOP/50MM 5 EA CLIN 05 03.503.412 MATRIXMANDIBLE 1.5MM DRILL BIT J-LATCH W/12MM STOP/50MM 5 EA CLIN 06 03.503.451 MATRIXMANDIBLE 1.5MM DRILL BIT J-LATCH/90MM FOR 03.503.043 5 EA CLIN 07 03.503.476 MATRIXMANDIBLE 1.5MM DRILL BIT J-LATCH FOR 03.503.045/.047 5 EA CLIN 08 03.503.461 MATRIXMANDIBLE 1.8MM DRILL BIT J-LATCH/90MM FOR 03.503.044 5 EA CLIN 09 03.503.477 MATRIXMANDIBLE 1.8MM DRILL BIT J-LATCH FOR 03.503.045/.047 5 EA CLIN 010 03.503.044 MATRIXMANDIBLE 1.8MM THREADED DRILL GUIDE-SHORT 5 EA CLIN 011 03.503.160 MATRIXMANDIBLE BENDNG TEMPLATE FOR NARROW TENSION BAND PLATES 5 EA CLIN 012 03.503.161 MATRIXMANDIBLE BENDNG TEMPLATE F/1.0MM BROAD TENSION BAND PL 5 EA CLIN 013 03.503.162 MATRIXMANDIBLE BENDNG TEMPLATE F/1.0MM THICK ADAPTION PLATES 5 EA CLIN 014 03.503.173 MATRIXMANDIBLE BENDNG TEMPLATE F/2.0MM BROAD CRESCENT PLATES 5 EA CLIN 015 03.503.174 MATRIXMANDIBLE BENDNG TEMPLATE F/2.0MM THICK STRAIGHT PLATES 5 EA CLIN 016 03.503.175 MATRIXMANDIBLE BENDNG TEMPLATE F/2.0MM BROAD 3X3 ANGLE PLATES 5 EA CLIN 017 03.503.181 MATRIXMANDIBLE BENDNG TEMPLATE F/2.5/2.8MM ANGLE RECON PLATES 5 EA CLIN 018 03.503.180 MATRIXMANDIBLE BENDNG TEMPLATE F/2.5/2.8MM STRAIGHT RECON PL 5 EA CLIN 019 03.503.244 MATRIX 1.1MM DRILL BIT J-LATCH/4MM STOP/44.5MM 5 EA CLIN 020 03.503.246 MATRIX 1.1MM DRILL BIT J-LATCH/6MM STOP/44.5MM 5 EA CLIN 021 03.503.248 MATRIX 1.1MM DRILL BIT J-LATCH/8MM STOP/44.5MM 5 EA CLIN 022 03.503.112 MATRIXMIDFACE 1.25MM DRILL BIT J-LATCH/12MM STOP/44.5MM 5 EA CLIN 023 03.503.110 MATRIXMIDFACE 1.25MM DRILL BIT J-LATCH/10MM STOP/44.5MM 5 EA CLIN 024 317.68 1.5MM DRILL BIT/STRYKER J-LTCH WITH 8MM STOP/44.5MM 5 EA CLIN025 317.72 1.5MM DRILL BIT/STRYKER J-LTCH WITH 12MM STOP/44.5MM 5 EA CLIN 026 201.928 2.0MM IMF SCREW SELF-DRILLING 8MM 5 EA CLIN 027 201.932 2.0MM IMF SCREW SELF-DRILLING 12MM 5 EA This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-056. The following FAR and VAAR provisions and clauses are incorporated into this solicitation document by reference: 52.212-1, Instructions to Offerors-Commercial; 52.212-4, Contract Terms and Conditions-Commercial Items; 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders (of which 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.223-18, 52.225-1, 52.225-13, and 52.232-34 are applicable); and VAAR 852.246-70, Guarantee. Additionally, please include a completed copy of provision 52.212-3, Offeror Representations and Certifications-Commercial Items, with your offer. 52.212-2, Evaluation - Commercial Items, and VAAR 852.211-73, Brand Name or Equal, are also incorporated into this solicitation. The offered items must meet all requirements set forth in the product specifications/salient characteristics section to be considered a responsive offer. The offeror must meet the requirements of the solicitation and have the lowest cumulative price for all items. If an "equal" item is offered, the offeror must submit descriptive literature that conclusively establishes product equivalency and technical acceptability and compatibility at time of quote submission. Also, if the offeror is not the manufacturer of the quoted items, the offeror shall submit written evidence at time of quote that clearly verifies that the firm is an authorized distributor and/or reseller of the quoted products and an authorized installer/maintenance provider to ensure proprietary equipment, licensing, and warranties are not voided. The Government intends to issue a firm fixed price contract. Offerors shall submit quotes on solicitation VA248-14-Q-1391. Quotes must be submitted electronically via email to [email protected]. The Subject Line of your email shall state: RFQ VA248-14-Q-1391 Quote Submission" The offered items must be for New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid must be valid for 30 calendar days after close of solicitation. Registration with the System for Award Management (SAM), pursuant to applicable regulations and guidelines is required prior to award. Registration information can be found at www.sam.gov.

Bid Protests Not Available