This is a combined synopsis/solicitation prepared in accordance with FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are not being requested and a written solicitation will not be issued. The U.S. Naval Hospital, Okinawa, Japan intends to negotiate a sole-source contract with KLS MARTIN L.P. for various surgical implants. However, any firm that believes it can meet the requirements may give written notification to the Point of Contact (POC). Offerors responding to this notice must be FDA approved for the manufacture, sale and distribution of these products. Offerors must be authorized distributors of KLS MARTIN L.P. products. Contractor must be registered in Central Contractor Registration. [Note: Lack of registration in the Central Contractor Registration will make a Contractor ineligible for award] Registration is available via the Internet at www.ccr.gov. Shipping shall be direct to U.S. Naval Hospital, Okinawa, Japan. The requirements includes the following schedule of supplies:TWIST DRILL 1.1 MM DIA X 50MM, ITEM # 25-452-05, 5 EA; CTR-DRIVE MINI SCREW 2.0MMX7MM, ITEM # 25-095-07 5 PG; CTR-DRIVE MINI SCREW 2.0MMX9MM, ITEM # 25-095-09, 5 PG; CTR-DRIVE MINI SCREW 2.0MMX11M, ITEM # 25-095-11, 5 PG; CTR-DRIVE MINI SCREW 2.0MMX13M, ITEM # 25-095-13, 5 PG; CTR-DRIVE MINI SCREW 2.0MMX15M, ITEM # 25-095-15, 5 PG; CTR-DRIVE BONE SCREW 2.3MMX7MM, ITEM # 25-085-07, 5 PG; LP PLATE L-SHAPE RIGHT MED 0.6, ITEM # 50-375-04, 10 EA; LP PLATE L-SHAPE LEFT MED 0.6M, ITEM # 50-377-04, 5 EA; LP PLATE L-SHAPE RGT LONG 0.6M, ITEM # 50-379-04, 5 EA; LP PLATE L-SHAPE LEFT LONG 0.6, ITEM # 50-381-04, 5 EA; LP PLATE T-SHAPE 90* REG 0.6MM, ITEM # 50-386-06, 5 EA; MINI PLATE 4 HOLE LONG, ITEM # 25-552-04-1, 5 EA; TWIST DRILL, 1.5MM DIA X 115MM, ITEM # 25-468-11, 5 EA; MICRO PLATE, L-SHAPE, LT, LONG, ITEM # 25-310-85, 5 EA; MINI PLATE 4 HOLE REGULAR, ITEM # 25-550-04-1, 5 EA; MICRO PLATE, L-SHAPE 100 3 X 2, ITEM # 25-314-85, 5 EA; LP PLATE DBL Y-SHP REG .6MM, ITEM # 50-396-06, 5 EA; LP PLATE Y-SHAPE REGULAR 0.6M, ITEM # 50-390-05, 5 EA; CENTRE-DRIVE MINI SCREW/2.0X5, ITEM # 25-095-05-1, 5 EA; CENTRE-DRIVE MINI SCREW/2.0X7, ITEM # 25-095-07-1, 5 EA; CTR-DRIVE MINI SCREW 2.0MMX9MM, ITEM # 25-095-09-1, 5 EA; CTR-DRIVE MINI SCREW 2.0MMX11M, ITEM # 25-095-11-1, 5 EA; CTR-DRIVE MINI SCREW 2.0MMX13M, ITEM # 25-095-13-1, 5 EA; SCREW CENTER-DRIVE MINI 2X17MM, ITEM # 25-095-17, 5 PG; PLATE LP L-SHAPED RIGHT 5 HOLES, .75MM, ITEM # 50-381-05, 5 EA; PLATE LP L-SHAPED LEFT 5 HOLES, .75MM, ITEM # 50-383-05, 5 EA; PLATE LP L-SHAPED RIGHT 7 HOLES, .75MM, ITEM # 50-405-07, 5 EA; PLATE LP Y-SHAPED 8 HOLES, .75MM, ITEM # 50-405-08, 5 EA; PLATE LP L-SHAPED RIGHT 9 HOLES, .75MM, ITEM # 50-405-09, 5 EA; PLATE LP ORBITAL 12 HOLES .75MM, ITEM # 50-405-12, 5 EA; PLATE LP X-SHAPED 8 HOLES .75MM, ITEM # 50-406-08, 5 EA; PLATE LP L-SHAPED LEFT 7 HOLES, .75MM, ITEM # 50-407-07, 5 EA; PLATE LP L-SHAPED LEFT 9 HOLES, .75MM, ITEM # 50-407-09, 5 EA; SCREWMINI DRILL-FREE 2.0MM-DIA X 7.0MM, ITEM # 25-679-07, 5 EA; SCREWMINI DRILL-FREE 2.0MM-DIA X 5.0MM, ITEM # 25-679-05, 5 EA; DRILL TWIST 1.8MM-DIA X 105MM W/ NOTCH, ITEM # 25-462-18, 5 EA. The following provisions and clauses apply plus any addenda: FAR 52.212-1 Instructions to Offerors - Commercial Items; 52.212-2 Evaluation - Commercial Items; 52.212-3 Offeror Representations and Certifications --Commercial Items; 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders- Commercial Items and 52.212-4 Contract Terms and Conditions - Commercial Items. NAICS Code for this requirement is 339112.The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. 1) Past performance 2) Technical capability 3) Price. Past performance and technical capability when combined has more importance than price. Responses must be submitted to the POC no later than July 23, 2007; 12 PM; Japan Standard Time. Responses shall be submitted via e-mail in Word, Excel, or PDF format to the POC, Hiro Oshiro, at [email protected] or faxed to 011-81-989-93-5754. Telephone inquiries or requests will not be accepted. Responses received will be evaluated; however, a determination by the Government not to compete the proposed procurement based upon responses to this notice is solely within the discretion of the Government. If no responses are received, U.S. Naval Hospital, Okinawa, Japan will proceed with the sole source procurement.

Bid Protests Not Available