Space and Naval Warfare SystemsCenter (SPAWARSYSCEN) Atlantic intends to award a commercial, sole source contract IAW FAR Part 13, to Precision Filters, Inc., 240 Cherry St., Ithaca, NY 14850. The proposed acquisition is for the procurement of Precision Filters, Inc. 4164 64X64 Solid State Switch Matrix System along with cable and panel sets for the Tactical Mobile Acoustic Support System (TacMASS). The Precision Filter 4164 Switch Matrix provides the TacMASS with the capability to remotely and manually connect both of the 28 track analog SYPRIS recorders and associated hardware together for high speed data processing and display at multiple workstations. The Precision 4164 Solid State Switch Matrix System provides 64x64 rectangular coordinate switching with 4,096 cross points. The 4164 Switch Matrix is a robust switching system. When power is applied to the system it provides uni-directional signal paths from the input to the output channels. When power is removed, switch settings are maintained in non-volatile memory and restored at power up. The system is controlled from the front panel, remotely using command line control or by running a graphical user interface on the TacMASS Control Processor. The 4164s Built-In-Test (BIT) Subsystem provides verification of the system integrity. The Factory Acceptance Test (FAT) exhaustively tests all possible switch connections and reports faults. The Go/No-Go test checks the current switch setup and may be run in place with all input/output cables connected to the system. Other features include a spreadsheet style graphical user interface which operate under the TacMASS Control Processor and runs under a Microsoft Windows environment. The interface provides for System health monitoring of the power supply and internal temperatures. Built-in self-tests, with reports, exhaustively test switch settings. Signal switching has a 10 Vpk for each signal path. Input Characteristics include: Differential Input 10 Vpk, linear; Common Mode Input 10 Vpk, linear; Protection 35 Vpk maximum, without damage; Input Z 1M differential 1%. Output Characteristics: Output type single- ended with switch (manual) selectable ground sense; Maximum Output 10 Vpk at 10 mA pk; Output Z 10. Transfer characteristics include: Frequency response DC 0 dB 0.005 dB, 10kHz -0.005 dB 0.005dB, 100 kHz -0.01 dB 0.005 dB, 1 MHz -0.02 dB 0.12 dB; Level vs. Frequency 10 Vpk for f?200 kHz; 10 Vpk (200 kHz/f) for f> 200 kHz; Distortion 0.1% at 7 Vrms and 10 kHz; Noise 100 Vrms in 100 kHz BW, maximum; Channel crosstalk -90 dB, maximum, at 10 kHz, -75 dB, maximum, at 100 kHz, -55 dB, maximum, at 1 MHz; Phase match 1 maximum, DC to 100 kHz; DC offset 500 V typical, 0.5 mV maximum; Delay 750 ns typical; recovery time < 1 s w/500% overload. Physical Characteristic Requirements per unit: Size: 19 Inches deep, 19 inches wide, 1U in height Weight: maximum 12lbs Environmental Requirements: Operating Temp: 0 degrees C to 40 degrees C Storage Temp: -20 degrees C to 70 degrees C Relative Humidity: Less than 80% non condensing Mating Connectors: The Mating connectors shall be standard 26D-MTL, 26D-SC-MTL and BNC Precision Filters are the small business manufacturer of these items with proprietary. See attached item descriptions, part numbers and quantities. A Firm Fixed Price, Indefinite Delivery, Indefinite Quantity type contract is anticipated with a one- year base period and two one-year options. The applicable North American Industry Classification System (NAICS) code is 334419 and the size standard is 500 employees. This notice is not a request for competitive proposals. Any response to this notice is due no later than 07 August 2009. The SPAWAR Systems Center Atlantic point of Contact is Samantha Cook, Code 2.2.53SC, at email [email protected],; phone 843-218-4678.

Bid Protests Not Available