This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is DPGTSDTS181220d and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-101. The associated North American Industrial Classification System (NAICS) code for this procurement is 335999 with a small business size standard of 500.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2019-01-08 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Dugway Proving Ground, UT 84022

The MICC End User requires the following items, Brand Name or Equal, to the following:
LI 001: 52AW71 Knock Out Seal,1/2" Conduit Size,0.36" D Mfg Brand Name: RACO Manufacturer Part No: 1042, 100, EA;
LI 002: 52AW72 Knock Out Seal,3/4" Conduit Size,0.31" D Mfg Brand Name: RACO Manufacturer Part No: 1043, 100, EA;
LI 003: 52AW73 Knock Out Seal,1" Conduit Size,0.34" D Mfg Brand Name: RACO Manufacturer Part No: 1044, 100, EA;
LI 004: 5GTF6 Cord Connector,1 in., Straight, White Mfg Brand Name: HUBBELL WIRING DEVICE-KELLEMS Manufacturer Part No: SHC1046, 100, EA;
LI 005: 5GTF7 Cord Connector,1-1/4 in., Straight, White Mfg Brand Name: HUBBELL WIRING DEVICE-KELLEMS Manufacturer Part No: SHC1051, 20, EA;
LI 006: 5GTE8 Cord Connector,3/8 in., Straight, Orange Mfg Brand Name: HUBBELL WIRING DEVICE-KELLEMS Manufacturer Part No: SHC1008, 100, EA;
LI 007: 5JML7 Liquid Tight Grip,Straight,1 In. Mfg Brand Name: HUBBELL WIRING DEVICE-KELLEMS Manufacturer Part No: 074093404, 10, EA;
LI 008: 5JML6 Liquid Tight Grip,Straight,3/4 In. Mfg Brand Name: HUBBELL WIRING DEVICE-KELLEMS Manufacturer Part No: 074093403, 15, EA;
LI 009: 5JML5 Liquid Tight Grip,Straight,1/2 In Mfg Brand Name: HUBBELL WIRING DEVICE-KELLEMS Manufacturer Part No: 074093402, 15, EA;
LI 010: 53JW96 Long Nose Plier,13-1/2" L, Serrated Mfg Brand Name: WESTWARD Manufacturer Part No: 53JW96, 2, EA;
LI 011: 1WNB8 Ratcheting Wrench Set, Pieces 10 Mfg Brand Name: PROTO Manufacturer Part No: JSCRM-10S, 4, EA;
LI 012: 1WNB9 Ratcheting Wrench Set, Pieces 9 Mfg Brand Name: PROTO Manufacturer Part No: JSCV-9S, 4, EA;
LI 013: 1VMK2 Label Tape Cartridge,Vinyl,18 ft.L,1/2"W Mfg Brand Name: DYMO Manufacturer Part No: 18444, 15, EA;
LI 014: 3KF30 Beam Clamp,1 in., Malleable Iron,Pk50 Mfg Brand Name: GRAINGER APPROVED Manufacturer Part No: 3KF30, 1, EA;
LI 015: 20LA58 Beam Clamp,1/4",Malleable Iron,PK50 Mfg Brand Name: SUPERSTRUT Manufacturer Part No: 500-SC, 1, EA;
LI 016: 20LA60 Beam Clamp,3/8"-16,Malleable Iron,PK25 Mfg Brand Name: SUPERSTRUT Manufacturer Part No: 502, 2, EA;
LI 017: 20LA59 Beam Clamp,5/16 in., Malleable Iron, PK50 Mfg Brand Name: SUPERSTRUT Manufacturer Part No: 501, 1, EA;
LI 018: 3LK73 Beam Clamp, 2-1/2 In., 1-5/16 in., Pk10 Mfg Brand Name: GRAINGER APPROVED Manufacturer Part No: 3LK73, 1, EA;
LI 019: 6YH35 Twist On Wire Connector, 22-14 AWG, PK100 Mfg Brand Name: IDEAL Manufacturer Part No: 30-072, 3, EA;
LI 020: 22C174 Mechanical Conn, Lug, 1/0 to 14 AWG, 1 Cond Mfg Brand Name: BURNDY Manufacturer Part No: KA25U, 30, EA;
LI 021: 22C175 Mechanical Conn, Lug,6 to 2/0 AWG, 1 Cond Mfg Brand Name: BURNDY Manufacturer Part No: KA26U, 30, EA;
LI 022: 22C172 Mechanical Conn, Lug, 2 to 14 AWG, 1 Cond Mfg Brand Name: BURNDY Manufacturer Part No: KA2U, 20, EA;
LI 023: 22C171 Mechanical Conn, Lug, 6 to 14 AWG, 1 Cond Mfg Brand Name: BURNDY Manufacturer Part No: KA6U, 20, EA;
LI 024: 49YK49 Blade Plug, Blk, 0.245" to 0655" Cord Size Mfg Brand Name: HUBBELL WIRING DEVICE-KELLEMS Manufacturer Part No: 515P, 20, EA;
LI 025: 49YK48 Straight Blade Connector, Nylon, 125VAC Mfg Brand Name: HUBBELL WIRING DEVICE-KELLEMS Manufacturer Part No: 515C, 20, EA;
LI 026: 1X976 Watertight Plug, 5-15P, 15A, 125V Mfg Brand Name: HUBBELL WIRING DEVICE-KELLEMS Manufacturer Part No: HBL14W47, 10, EA;
LI 027: 1X977 Watertight Connector, 5-15R, 15A, 125V Mfg Brand Name: HUBBELL WIRING DEVICE-KELLEMS Manufacturer Part No: HBL15W47, 10, EA;
LI 028: 5YE59 Channel Square Washer, 3/8", Silver, PK25 Mfg Brand Name: GRAINGER APPROVED Manufacturer Part No: V500 3/8EG, 2, EA;
LI 029: 5YE57 Channel Square Washer, 1/2", Silver, PK25 Mfg Brand Name: GRAINGER APPROVED Manufacturer Part No: V500 1/2EG, 1, EA;
LI 030: 1KA17 Washer, 1/2" Bolt, St,1-3/8" OD, PK50 Mfg Brand Name: FABORY Manufacturer Part No: U38157.050.0001, 2, EA;
LI 031: 38WG19 HHCS, 1/2-13x1, Steel, Gr 5, Plain, PK25 Mfg Brand Name: GRAINGER APPROVED Manufacturer Part No: N01000.050.0100, 4, EA;
LI 032: 38WK06 HHCS, 1/2-13x2, Steel, Gr 5, Plain, PK10 Mfg Brand Name: GRAINGER APPROVED Manufacturer Part No: N01000.050.0200, 4, EA;
LI 033: 38WK10 HHCS, 1/2-13x3, Steel, Gr 5, Plain, PK10 Mfg Brand Name: GRAINGER APPROVED Manufacturer Part No: N01000.050.0300, 2, EA;
LI 034: 48KR39 Multi-Conductor, 22 AWG, Silver, 0.273 in. Mfg Brand Name: BELDEN Manufacturer Part No: 8777 0601000, 2, EA;
LI 035: 19G462 Computer Cable, Shielded, 22/10, 1000 Ft. Mfg Brand Name: GENERAL CABLE Manufacturer Part No: C0765A.41.10, 2, EA;
LI 036: 5W578 Portable Cord, 12/3 AWG, 250 ft., 0.430" O.D Mfg Brand Name: CAROL Manufacturer Part No: 01380.35T.01, 3, EA;
LI 037: 4A854 Wire Stripper, 18 to 10 AWG, 6-1/4 In Mfg Brand Name: KLEIN TOOLS Manufacturer Part No: 11045, 5, EA;
LI 038: 4A855 Wire Stripper, 26 to 16 AWG, 6-1/4 In Mfg Brand Name: KLEIN TOOLS Manufacturer Part No: 11046, 5, EA;
LI 039: 4CP48 Diagonal Cutting Plier,4" L Mfg Brand Name: XCELITE Manufacturer Part No: MS549JV, 10, EA;
LI 040: 5WHA7 Ring Term,Vinyl,3/8 in.,1.79 in.,PK20 Mfg Brand Name: POWER FIRST Manufacturer Part No: 5WHA7, 2, EA;
LI 041: 5WHG7 Ring Term,Vinyl,3/8 in.,1.76 in.,PK20 Mfg Brand Name: POWER FIRST Manufacturer Part No: 5WHG7, 2, EA;
LI 042: 5WHA6 Ring Term,Vinyl,3/8 in.,1.50 in.,PK25 Mfg Brand Name: POWER FIRST Manufacturer Part No: 5WHA6, 2, EA;
LI 043: 4RHD1 Ring Term,Vinyl,1/4 in.,1.160 in.,PK50 Mfg Brand Name: STA-KON Manufacturer Part No: 10RC-14, 2, EA;
LI 044: 4RHD2 Ring Term,Vinyl,5/16 in.,1.230 in.,PK50 Mfg Brand Name: STA-KON Manufacturer Part No: 10RC-516, 2, EA;
LI 045: 5ZM19 Rigid Conduit,1/2 In.,10 ft. L, Steel Mfg Brand Name: GRAINGER APPROVED Manufacturer Part No: 583294, 30, EA;
LI 046: 5ZM30 Rigid Conduit,3/4",10 ft. L, Steel Mfg Brand Name: GRAINGER APPROVED Manufacturer Part No: 583302, 100, EA;
LI 047: 5ZM17 Rigid Conduit,1 In.,10 ft. L, Steel Mfg Brand Name: GRAINGER APPROVED Manufacturer Part No: 583310, 30, EA;
LI 048: 6XC30 EMT Conduit,1/2 In.,10 ft. L, Steel Mfg Brand Name: GRAINGER APPROVED Manufacturer Part No: 583195, 30, EA;
LI 049: 6XC31 EMT Conduit,3/4 In.,10 ft. L, Steel Mfg Brand Name: GRAINGER APPROVED Manufacturer Part No: 583203, 30, EA;
LI 050: 6XC32 EMT Conduit,1 In.,10 ft. L, Steel Mfg Brand Name: GRAINGER APPROVED Manufacturer Part No: 583211, 30, EA;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at [email protected]. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or [email protected] of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.
The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal.

The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions – Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea.

IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: Technical capability of the item offered to meet the Government requirement and price. Technical capability is more important than price.

IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance

Shipping is FOB Destination CONUS (CONtinental U.S.).

New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED.

Submitted Quotes will be valid for 45 days after the auction closing.

No multiple awards will be made. Quotes received through FedBid will be evaluated and awarded on an “all-or-nothing” basis.

This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).).

IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site.

The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf

"AMC-Level Protest Program If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 Packages sent by FedEx or UPS should be addressed to: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures."

"52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"

Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law.

Wide Area WorkFlow Payment Instructions

252.204-7012 Safeguarding of Unclassified Controlled Technical Information

All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E.

This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time.

Please address your questions through the FedBid buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - [email protected] or call 315-772-5582.

Bid Protests Not Available