Electronic, Optics and Laser Module for AN/PVS-6(MELIOS);Mini Eyesafe
Laser infrared Observation Set(END ITEM).
POC TECHNICAL, MOHAMMAD GANI (732) 532-4090
POC LOGISTICS, MARY GRASDORF (732) 532-3969.
This is a market survey to locate a source for production, testing
and delivery of MELIOS spares; the Electronic, Optics and Laser
Modules. NSNs 5860-01-324-2790, 5860-01-324-2791 and
5860- 01-324-8206 respectively.
CECOM is looking for a 5 years Indefinite Delivery Indefinite
Quantity (IDIQ) with 1 year option type contract to be awarded at
the Mid of FY 2009.
MELIOS:-(Description for information only); The Mini Eyesafe Laser
Infrared Observation Set is a lightweight, individually operated,
hand-held or tripod-mounted laser rangefinder capable of
determinin g ranges from 50 through 9995 meters in 5 meters
increments and displaying the range in the eyepiece.
Optics Module:-The Optics Module shall determine and display in
the eyepiece the distance to a targe t with required minimum of 50
meters and maximum of 9995 meters, in 5 meters increments, by
using the laser start pulse and the reflected laser stop pulse.
The optics Module shall exhibit no more than 1 fail ure out of any
100 consecutive rangings thereby determining the range to targets
under the conditions that the emitter beam shall be parallel to
the Optics Module Assembly optical axis, the emitter shall out put
2 pulses, one for the start time, one for the stop time, and the
emitter energy output shall correspond to the energy reflected
from a target 9990 meters distant.
Laser Module:-The Laser Module consists of several components
/assembly that receives high voltage from the Power Supply
Module (in the Electronic Module) and charges the storage
capacitor, when the Charge Switch is pressed. The Pulse Forming
Network(PFN) uses a capacitor to store energy during the
Charge cycle. When the capacitor is fully charged, the ready
indicator illuminates. The laser, consisting of the flash l amp,
laser rod, Q-switch assembly and partial mirror assembly,
produces an output beam. This beam travels through the Output
Collimating Telescope, which is made up of a corner cube prism,
telescope objective lenses, and the(visible light filter)
output window.
Electronics Module:- The Electronics Module consists of several
modules/switches. The Power Supply Module, depending on the
position of the Mode Switch, supplies;
5Vdc to the specified circuits in the Optics and Laser Modules.
12 Vdc to the Receiver Module circuits in the Optics Module.
Switched 24 Vdc.High Voltage fo r the laser Module (700 to 850 Vdc.)
The Mode Switch connects battery power to the Power Supply
Module circuits. The Mode Switch has 4 positions: OFF, FIRST RTN,
LAST RTN, TEST (PULL).With t he Mode Switch in FIRST RTN or
LAST RTN, the charge switch will initiate the charging of the
PFN(Pulse Forming Network) capacitor in the Laser Module and,
when the capacitor reaches the set voltage level, the ready
indicator will illuminate in the display to the left of the
range digits.
Performance Specifications for all these 3 spares(Modules);
MIL-O-49251, MIL-L-49250, and MIL-E-49252 respectively are
available upon request.
This is not a request for proposals. Interested suppliers must
include vendor brochures which detail comprehensive/complete
information on technical and critical performance characteristics.
Sample items/hardware are desired but not required and will not
be returned.
Closing date for responses is NLT 16 April 2008.
Respond to: Commander, USACECOM, Attn;
AMSEL-LC-IEW-N-LS. BLDG.1201W, FT. MONMOUTH
NJ 07703-5023.
EMAIL-ADDRESS: [email protected]
Bid Protests Not Available
G