Federal Bid

Last Updated on 11 Sep 2012 at 8 AM
Sources Sought
Aberdeen Maryland

58--FMS Case BR-B-UUA

Solicitation ID MARKET-SURVEY-5302-1
Posted Date 29 Jun 2012 at 7 PM
Archive Date 11 Sep 2012 at 5 AM
NAICS Category
Product Service Code
Set Aside No Set-Aside Used
Contracting Office Not Specified
Agency Department Of Defense
Location Aberdeen Maryland United states 21005
FOR ALL INFORMATION PLEASE CONTACT: Mitch Jacquay 443-861-5671 [email protected], Franklin Lee 443-861-5667 [email protected]


You must respond NO LATER than the Respond Date and Time
The ACC-APG -C4ISR intends to acquire the following:
Commercial Exportable AVS-9 MX-10160 type GEN III Image Intensifier Tubes NTE 1600 FOM.

Salient Characteristics:

Figure of Merit: 1400 (minimum) - 1600 (NTE maximum)
Resolution: 64 lp/mm (minimum)
Diameter: 18 mm
Magnification: Unity (1X)
Photocathode: GaAs photocathode bonded to a glass input window
Sensitivity:
1800 min (at 2856 K, A/lm)
80 min (at 880 nmm, mA/W)

Luminance Gain fL/fc:
40,000-70,000 (at 2x10-6 fc)
10,000-20,000 (at 2x10-4 fc)

Screen: P-43 Phosphor
Spot Size:
Zones: 1 2 3

0.009-0.012: 0 0 0
0.006-0.009: 0 1 1
0.003-0.006: 0 2 2

Data Sheet: Yes, Tube Data Sheet for each tube with serial number

Warranty: 1 year

Commercial Export Helmet Mount Assembly CADEX-643-931. This helmet mount supports all the Night Vision Systems as it is a universal system to support AN/PVS-14, AN/PVS-7 and AN/PVS-23.

Commercial Export Eyepiece Assembly (25mm Eye relief), P/N: 5009545.

REQUIRED INFORMATION:

1. If you are a reseller/distributor you MUST disclose the manufacturer of the Tubes.

2. You MUST state delivery ARO of all HARDWARE.

3. If you are a reseller/distributor you MUST disclose the manufacturer of ALL ITEMS listed.

4. If you are a reseller/distributor you MUST provide certification that Night Vision Tubes are NOT Russian made.

5. You MUST reference the FMS case designator on your formal solicitations.
6. Image Intensifier Tube data sheets for each tube with serial number will be requested after contract award

7. There will be a potential call for an incoming inspection by DCMA to check tubes and tube housings

8. A quality system on tubes and tube housings will be requested after contract award.

9. Identify whether you are a small or large business

10. If you are a small business then identify your subcategory, i.e. 8A, SDB, SDVOB, etc.

Respond to My Attention by 11 AM Eastern on 13 July 2012
[email protected], Franklin Lee, EMAIL [email protected]

Bid Protests Not Available

Similar Past Bids

Aberdeen Maryland 19 Dec 2012 at 8 PM
Leavenworth Kansas 21 Feb 2013 at 10 PM
Fort monmouth New jersey 24 Jan 2011 at 9 PM
Dallas Texas 22 Apr 2021 at 5 PM

Similar Opportunities

Hill air force base Utah 11 Jul 2025 at 8 PM
Hill air force base Utah 11 Jul 2025 at 8 PM
Hill air force base Utah 11 Jul 2025 at 8 PM
Hill air force base Utah 11 Jul 2025 at 8 PM
Hill air force base Utah 11 Jul 2025 at 8 PM