SOURCES SOUGHT This is not a request for proposal. This synopsis is for information and planning purposes only and it not to be construed as a commitment by the Government. This is not a solicitation announcement for proposals and no contract will be awarded from this announcement. Reimbursement will not be made for any costs associated with providing information in response to this announcement and any follow-up information requests. The 97th Contracting Squadron, Altus Air Force Base, Oklahoma is looking for sources that can meet the specifications below for a wall signs for the 54th Air Refueling Squadron. All companies that can meet the specifications are encouraged to provide lead-time requirements, product brochures, company capabilities, and any other information that the Government should consider. All responses are due to the 97th Contracting Squadron, by 10 June 2008 1100(CST). Any questions concerning this requirement should be directed to Lori Ann Clinton [email protected] or Todd Witzlsteiner at [email protected] or fax number (580) 481-5138. All information in response to this sources sought announcement shall be e-mailed or faxed to the same by 10 June 2008. The following is the technical description of the requirement: Requirements for 54 ARS Conference Room We are looking for a material that is three dimensional we would prefer a plaster-like substance, but wood would be acceptable. We need six total items: 54 ARS Patch (Quantity=2) Approx 3 ft circumference to match the picture attached and coloring to match picture. 97 AMW Shield(Quantity=1) Approx 2 ft width at the widest point (the end of the scroll) and two feet height with coloring to match picture. AETC Shield (Quantity=1) Approx 2 ft width at the widest point (the end of the scroll) and two feet height with coloring to match picture. Old USAF Symbol (Quantity=1) Approx 2 ft diameter with coloring to match picture. New USAF Symbol (Quantity=1) Approx 2 ft height, coloring to match picture and the following necessary requirements for width. The ratio of the width of the symbol to the height should be 112% (i.e., width = 112, height = 100). If you know the width, multiply it by 100, then divide by 112 to get the height. If you know the height, multiply it by 112, then divide by 100 to get the width. Pictures of patches available upon request

Bid Protests Not Available