GSA, FSS intends to establish a "not to exceed" one-year Standing Price Quote (SPQ) for National Stock Number 5130-00-357-5135. This NSN is part of GSA's Stock Program. All offers are to be FOB destination. In addition to the normal clauses that apply to GSA stock tool orders, the following clauses apply; 552.225-70 Notice of Procurement Restriction - Hand or Measuring Tools or Stainless Steel Flatware, D-FSS-475 Bar Coding and 552.246-70 Source Inspection applies. Award will be based on price and deliver time (DARO). Quantities stated below are estimates based on the last two years usage. For questions please contact Celeste Gorman at 816-926-2438, or you may fax questions to 816-823-3109. Please fax your offers to Celeste Gorman at 816 823 3109 5130-01-087-6839 UI: EA Estimated quantity 25 each Previous price K-Tool $512.38 SHEARS, METAL CUTTING, ELECTRIC DESCRIPTION: In accordance with Commercial Item Description A-A-50459A, dated April 14, 1989. NSN 5130-01-087-6839, Type I; Size 3; 6 feet minimum cord length. EXCEPTION(S) TO TECHNICAL DOCUMENT Page 2, delete the last sentence of paragraph 10. Page 4, delete paragraph 27. "Workmanship" Page 4, delete paragraph "Contractor certification" Page 4, Add the following paragraphs: Quality Assurance Provisions: Product Conformance - The product offered shall meet the salient characteristics of this technical description, and conform to the producer's own drawings, specifications, standards, and quality assurance practices and be the same as the product offered for sale in the commercial marketplace. When specific quality assurance provisions are specified for any commercial characteristic the contractor shall maintain records resulting from his inspection(s) conducted according to the specific quality assurance provisions. The government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided under the provisions of the contract. The government reserves the right to audit the contractor's quality assurance records. Market Acceptability - No item of equipment offered under this technical description shall be acceptable unless the manufacturer has marketed equipment of the same size and type in a commercial environment for a minimum period of one year. Equipment installed for test purposes in a manufacturer's plant or test laboratory shall not be considered as complying with this requirement. ITEM MARKING Each item (including all items within a set or kit) shall be marked with the manufacturer's name and identifying symbol, and the state or country of manufacture, unless otherwise specified. All marking shall be engraved, etched, molded, or indented. PACKAGING One (1) item shall be preserved and packaged in a unit package designed to protect the item against damage during shipment, handling, and storage. PACKING The unit packages shall be packed in a close fitting fiberboard box in compliance with the Uniform Freight Classification and the National Motor Freight Classification requirements of Rules, Item 222, Sec. 3., Minimum 200 or ECT 32. MARKING All unit, intermediate, transport packages and unit loads shall be marked and bar coded for delivery to civilian activities in accordance with FED-STD-123G, dated June 6, 1997, or marked and bar coded for delivery to military activities in accordance with MIL-STD-129N, dated 15 May 1997, as applicable. PALLETIZATION Pallet Configuration: The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, double face non-reversable pallets. Pallet lumber used shall be bark free. Pallet Load Size: The load plus the pallet shall have a maximum Height of 53 inches and shall not exceed 2500 pounds in weight. Pallet Load Configuration: The containers or items shall be placed in a suitable pattern to form a stable and balanced load. Palletized loads shall be secured to the pallet to insure that the load arrives intact. Stacking Strength: The pallet plus the load shall be capable of supporting three additional like loads without any product damage and without the load or the pallet collapsing. Vertical, horizontal, or filler reinforcement may be added as necessary to provide strength. Partial Palletized Loads: Less than one-half pallet loads shall not be used for stacking, unless load is balanced on pallet. The partial palletized load shall be used for top loading only.

Bid Protests Not Available